know your ip address click here! (http://www.whatismyip.com/)


Windows - Computer connected directly to the modem

1. Get to a command prompt. (START, run, cmd).
2. Type "ipconfig /release" (without the quotes, on the command line by itself).
3. Type "ipconfig /renew" (without the quotes, on the command line by itself).

Windows (second option) - Computer connected directly to the modem

1. Get to a command prompt. (START, run, cmd).
2. Type "ipconfig /release" (without the quotes).
3. Shut down computer.
4. Turn off computer.
5. Turn off all ethernet hubs/switches.
6. Turn off cable/DSL modem.
7. Leave off overnight.
8. Turn everything back on.

:D:excited:
try it..
after doing a method
know your ip address click here! (http://www.whatismyip.com/)

using these methods will enable you to download files as many as you want from rapidshare, megaupload or any other sites..

medyo malabo...

7. Leave off overnight.

eh di hintayin ko nalang ung hours kung kelan ulit pwede mag DL sa Rs.... :lol:

PARA SA MGA GUMAGAMIT NG MAC NA OS

some things in this in this post may harm your computer if done improporly.
by reading this text or any of this post you agree that it is not my fault that your computer becomes damaged or becomes misfunctional. i am in no way telling you that it is okay to change you MAC address to fool any program or server. this information is not ment for illigal activities and what you choose to i with it is of your own free will.

Depending on how your banned you there are a few different ways to unban yourself.
IP Unban:

THIS WILL ONLY WORK IF YOU ARE BANNED BY IP. IF YOUR MAC ADDRESS IS BANNED THERE IS NO POINT IN DOING THIS PART!

first of all>>> you may want to try simply going under my computer>my network places [right click>properties] then under the general tab scroll down to internet protocol (TCP/IP) click it and then click proporties. once here click "use the following ip addresses"
and set your own ip address

use dos to find out your Ip address, subnet mask (usually 255.255.255.0), and deafult gateway

copy them exactly and then change the last digits of your IP address

EG:

c:>ipconfig

ipaddress: 192.168.10.7 (your computers IP)
subnet mask: 255.255.255.0
Defult Gateway: 192.168.0.1 (this is the routers IP)

internet prot. (TCP/IP)
use the following IP addresses
ipaddress: 192.168.10.7 (change the last digit here) *
new ipaddress: 192.168.10.8
subnet mask: 255.255.255.0
Defult Gateway: 192.168.0.1

* count how many computer you have that connect to that router and raise the number by at least one. if you do not do this you may get conflicting IP addresses.


MAC address Change:

A MAC address stands for Media Access Control address and is your computer's unique hardware number. (On an Ethernet LAN, it's the same as your Ethernet address.) When you're connected to the Internet from your computer through either the Ethernet (wired) or Wireless Card (which is treated similarly by your computer), a correspondence table relates your IP address to your computer's physical (MAC) address on the LAN. below i will list a couple of methods to change your MAC address.

mind you these methods are for Changing the MAC address in W2K and XP ONLY

To avoid problems in your local area network:
Make sure you DO NOT assign one MAC address to multiple NIC's on a local area network (LAN). If you do that, you might create some problems. MAKE SURE YOU HAVE ONE UNIQUE MAC ADDRESS PER NIC!!!
check this under c:\ipconfig /all
on all the computers on your LAN

Method 1:

This is depending on the type of Network Interface Card (NIC) you have. If you have a card that doesn’t support Clone MAC address, then you have to go to second method.



o Go to Start->Settings->Control Panel and double click on Network and Dial-up Connections.
o Right click on the NIC you want to change the MAC address and click on properties.
o Under “General” tab, click on the “Configure” button
o Click on “Advanced” tab
o Under “Property section”, you should see an item called “Network Address” or "Locally Administered Address", click on it.
o On the right side, under “Value”, type in the New MAC address you want to assign to your NIC. Usually this value is entered without the “-“ between the MAC address numbers.
o Goto command prompt and type in “ipconfig /all” or “net config rdr” to verify the changes. If the changes are not materialized, then use the second method.
o If successful, reboot your systems.

Method 2:


This method requires some knowledge on the Windows Registry. If you are not familiar with Windows Registry consult with a technical person before you attempt on the following steps. Also, make sure you have a good backup of your registry.

a.Goto command prompt and type “ipconfig /all”, and

I. Record the Description for the NIC you want to change.

II. Record the Physical Address for the NIC you want to change. Physical Address is the MAC Address

figure 1.

b.Goto command prompt and type “net config rdr”, and you should see something like

figure 2.


c.Remember the number between the long number (GUID) inside the { }. For example, in the above “net config rdr” output, for MAC address “00C095ECB793,” you should remember {1C9324AD-ADB7-4920-B02D-AB281838637A}. You can copy and paste it to the Notepad, that’s probably the easiest way. (See figure 2.)

d.Go to Start -> Run, type “regedt32” to start registry editor. Do not use “Regedit.”


e.Do a BACKUP of your registry in case you screw up the following steps. To do this

I.Click on “HKEY_LOCAL_MACHINE on Local Machine” sub-window

II.Click on the root key “HKEY_LOCAL_MACHINE”.

III.Click on the drop-down menu “Registry -> Save Subtree As” and save the backup registry in to a file. Keep this file in a safe place.

f.Go to “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Contr ol\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}. Double click on it to expand the tree. The subkeys are 4-digit numbers, which represent particular network adapters. You should see it starts with 0000, then 0001, 0002, 0003 and so on. (See figure 3.)

Figure 3.

g. Go through each subkey that starts with 0000. Click on 0000, check DriverDesc keyword on the right to see if that's the NIC you want to change the MAC address. The DriveDesc should match the Description you recorded from step (a.-I.). If you are not 100% sure about the DriverDesc, then you can verify by checking if the NetCfgInstanceID keyword value matches the GUID from step (c).
If there is no match, then move on to 0001, 0002, 0003, and so on, until you find the one you want. Usually 0000 contains the first NIC you installed on the computer.
In this demonstration, 0000 is the NIC I selected. (See figure 3.)

h. Once you selected the subkey (i.e. 0000), check if there is a keyword "NetworkAddress" exist in the right side of the window. (See figure 3.)

I. If "NetworkAddress" keyword does not exist, then create this new keyword:

i. Click on the drop down menu “Edit -> Add Value”.

ii. In the Add Value window, enter the following value then click OK. (See figure 4.)
Value Name: = NetworkAddress Data Type: = REG_SZ

Figure 4.

iii. String Editor window will pop up at this time (see figure 5.)

iv. Enter the new MAC address you want to modify. Then click OK.
(There should not be any "-" in this address. Your entry should only consist of 12 digits as seen in the figure 5.)

II. If "NetworkAddress" keyword exists, make sure it shows the keyword type is REG_SZ, and it should show as NetworkAddress:REG_SZ: . This keyword might not have a value at this time.

i. Double click on the keyword NetworkAddress and the String Editor window will pop up. (See Figure 5.)

ii. Enter the new MAC address you want to modify. Then click OK.
(There should not be any "-" in this address. Your entry should only consist of 12 digits as seen in the figure 5.)

Figure 5.

j.There are 2 ways to make the new MAC address active. Method I does not require a system reboot:

I. Goto Start->Setting->Control Panel, and double click on "Network Neighborhood".
WARNING: Make sure you understand that you WILL lose the network connection after completing step "ii." below, and
if you have a DHCP client, you will get a new IP address after completing step "iii."

i. Select the Network Adaptor you just changed the MAC address.

ii. Right click on the selected Network Adaptor and click "Disable."
Verify the status column for this adaptor changes to "Disabled"

iii. Right click on the selected Network Adaptor and click "Enable."
Verify the status column for this adaptor changes to "Enabled"

iv. If for any reason it cannot be disabled or re-enabled, you have to
reboot your system to make the changes effective.

II. Reboot your Windows system.

k. Once completing step j (if rebooting the system, wait until the reboot is completed), go to command prompt, type “ipconfig /all” to confirm the new MAC address.



If MAC Address changes does not work:

If for whatever reason the MAC address cannot be changed using method 2, make sure you restore the registry setting by following the "Restore The TRUE Hardware burned-in MAC Address" instruction below. If necessary, restore the registry you just backed-up to get your system back to the original state. You can do this by clicking on the drop-down menu “Registry->Restore,” and restore your backup registry file. Restore The TRUE Hardware burned-in MAC Address:
Remove the entry you added:
If you followed Method 1, then go back to the advanced properties window and remove the entry you add.
If you followed Method 2, then remove the "NetworkAddress" keyword you added in the registry.
Use step (j) above to activate the change you make.
Once rebooted, go to command prompt, type “ipconfig /all” to confirm the original MAC address.
Method 3
i do not suggest this method as i have not used it or scanned it for viruses but there is a downloadable program avalible at http://www.klcconsulting.net/smac/ over just reading over some stuff it does seem to work. i'm not sure if it will work with your router though. it may only be for your systems router. (which would allow you to unban yourself from an internal router ban, but most likely not from any games)

medyo malabo...



eh di hintayin ko nalang ung hours kung kelan ulit pwede mag DL sa Rs.... :lol:

:lmao: .. nasubukan mo na ba ung first method? baka di mo alam two methods yan.. kung ayaw mong maghintay ng overnight,, edi sundin mo ung unang method.. ung pinaka goal lang naman nitong thread ay ang pag palit ng ip address.. :nakupo: anyway, the other one is only an alternate method kung sakaling di nag work ung first one..

:lmao: .. nasubukan mo na ba ung first method? baka di mo alam two methods yan.. kung ayaw mong maghintay ng overnight,, edi sundin mo ung unang method.. ung pinaka goal lang naman nitong thread ay ang pag palit ng ip address.. :nakupo: anyway, the other one is only an alternate method kung sakaling di nag work ung first one..

:excited: ok so its should be using the "first method" not using "these methods" ...

:excited: ok so its should be using the "first method" not using "these methods" ...

:lol: bakit first method lang? :nakupo: simpleng bagay pinapahirapan mo.. gaya ng sabi ko, the other one is an alternate method,, ibig sabihin pwede ring gamitin kung gugustuhin, hindi ibig sabihin first method lang ang gagamitin..naka parenthesis naman dun na second option.. :sigh:
as simple as A,B,C iho...
kung manggugulo ka lang sa thread mabuti pang wag ka nang mag post..

:lmao: hala bakit ka ngagalit? ganto nalang para mka DL ng mrami sa rs,mu etc. gamit nalng kayo ng usdownloader tested ko na... :beat:

:lmao: hala bakit ka ngagalit? ganto nalang para mka DL ng mrami sa rs,mu etc. gamit nalng kayo ng usdownloader tested ko na... :beat:

:lol: .. off topic ka na dude.. kung gusto mong malaman ang goal nitong thread.. the title says it all.. :rofl:

:nakupo: si boss tazzky mukang mapapasubo d2 :rofl:

Tnx sa info.!! :clap:

Ang gulo.

Pwedeng malaman ang IP address sa pamamagitan ng Start>Run>cmd>ipconfig /all

At magiiba ang inyong IP address kung ituturn off then on yung router nyo kung DSL kayo, o iddisconnect nyo ung modem then reconnect kung naka dial up nmn kayo..

Mas madali cguro kung ganyan. May nagaaway pa. Wala n sanang ganun.. :D

Tnx sa info.!! :clap:

salamat din marky,, at hindi ka naguguluhan.. sa mga bagay na napaka elaborated na ganyan ay dapat talagang di ka mahihirapang umintindi..:salute:

sorry ha.. pero..

ano ang reason kung bakit gusto mong palitan ang IP address? hindi po ito pilosopong tanong... gusto ko lang malaman...


hehe.. baka magustuhan ko reason.. palitan ko ren IP ad ko. :lol:

@margx para makapag download sa mga host sites ng tuloy tuloy, likaw sa rapidshare

if you want to change your ip address, just make it static.

sorry ha.. pero..

ano ang reason kung bakit gusto mong palitan ang IP address? hindi po ito pilosopong tanong... gusto ko lang malaman...


hehe.. baka magustuhan ko reason.. palitan ko ren IP ad ko. :lol:


plain and simple:

users (including me) often want to change their IP address because of one or more of the below reasons.

1. Network confliction or other network related issue.
2. Network application requires specific IP address or IP range.
3. Trying to protect themselves from other users.
4. Trying to deceive a vicious software program, user, or company.

hope this helps... :thumbsup:

ang strange naman... karaniwan naman ng DSL ay dynamic ang IP so a simple off and on ng modem sapat na... kung hindi gumana sabihin nyo sa akin ano DSL nyo, yan papakabit ko.. hehe...

BTW, nakakatawa naman, sabi sa first page leave off OVERNIGHT! e kaya ka nga magpapalit ng IP para sa rapidshare e... kung ganun lang din, antayin ko na yung isang oras diba.

BTW, nakakatawa naman, sabi sa first page leave off OVERNIGHT! e kaya ka nga magpapalit ng IP para sa rapidshare e... kung ganun lang din, antayin ko na yung isang oras diba.




:lmao: ung pinaka goal nitong thread ay nasa thread title. dinagdag ko lang ung about sa rapidshare. ngaun kung meron kaung ibang way kung pano magpalit ng ip add, just post it! wala nang kung ano-ano pa,, you're just insulting my thread.


i believe wala namang mali sa thread na ito. nagagawa naman nya kung anong gusto nyang mangyari.

if you're unhappy with my thread,,, it's better to leave it than to make an issue that doesn't really make sense.

kung gusto mong malaman kung bakit nagpapalit ng ip address ang mga users.
please try to read:

users (including me) often want to change their IP address because of one or more of the below reasons.

1. Network confliction or other network related issue.
2. Network application requires specific IP address or IP range.
3. Trying to protect themselves from other users.
4. Trying to deceive a vicious software program, user, or company.



ibig sabihin hindi lang para sa rapidshare. :nakupo:

thanks to schayne_

kung gusto nyo tlaga paltan ang IP address nyo... bili kayo router , iconfigure nyo ung User Interface tas ung dhcp sttings nya.

know your ip address click here! (http://www.whatismyip.com/)


Windows - Computer connected directly to the modem

1. Get to a command prompt. (START, run, cmd).
2. Type "ipconfig /release" (without the quotes, on the command line by itself).
3. Type "ipconfig /renew" (without the quotes, on the command line by itself).

Windows (second option) - Computer connected directly to the modem

1. Get to a command prompt. (START, run, cmd).
2. Type "ipconfig /release" (without the quotes).
3. Shut down computer.
4. Turn off computer.
5. Turn off all ethernet hubs/switches.
6. Turn off cable/DSL modem.
7. Leave off overnight.
8. Turn everything back on.

:D:excited:
try it..
after doing a method
know your ip address click here! (http://www.whatismyip.com/)

bro walang nagbago after doing the first method, same IP pa rin.

di naman to effective

Ang gulo.

Pwedeng malaman ang IP address sa pamamagitan ng Start>Run>cmd>ipconfig /all

At magiiba ang inyong IP address kung ituturn off then on yung router nyo kung DSL kayo, o iddisconnect nyo ung modem then reconnect kung naka dial up nmn kayo..

Mas madali cguro kung ganyan. May nagaaway pa. Wala n sanang ganun.. :D

ty sayo... i was able to change my IP add with your instruction

Overnight?:slap:

off topic po yata tong sasabihin ko pero...
kung gusto nyu magdownload sa mga filehosting sites like rapidshare, megaupload, etc.
mag search na lang kayu ng premium link generators.. eto po example...
rapid8.com
tsambahan nga lang dyan.. kasi minsan nagwowork sya sakin pero minsan server full daw..
try nyu na lang po...
dami pa ako alam na premium link generator.. pm lang sa mga may gusto..