eduard816
22nd Oct '09 Thu, 17:54
[SUN][TUT]Way How to Check if may Working ang Connection ng SUN
INTRODUCTION:
Itong TUTORIAL na ito is pinost ko under NETWORK OPERATORS Section since main Concern nito is SUN Connection. Minsan kasi ITO ANG COMMON PROBLEM kaya ayaw magwork ang mga APPLICATIONS sa SUN. May times na UNSTABLE ang connection, and may gagawin ka lang para maTRY ULIT ANG CONNECTION. OK???
LET'S BEGIN..
I'LL BE USING AS AN EXAMPLE ANG OPERAMINI SA PAGCONNECT SA SUN NETWORK
1. When Starting to Connect using Operamini, magtatanong ng Access Point, then PIPILI tayo ng Access Point.
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0264.jpg http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0269.jpg
2. Then ang GAWIN NYO PARA MACHECK IF GOOD ANG CONNECTION SA SUN, Press MENU, then Go to your CONNECTION MANAGER. THen Options, press DETAILS, Then makikita nyo ang Received and Sent IF KAHIT ISA SA RECEIVED OR SENT BYTES IS VALUE NA IS ZERO I END NYO NA ANG CONNECTION. Kasi magfafailed to COnnect nun siya sa OPERAMINI, and as you can see INACTIVE ang CONNECTION.
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0265.jpg http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0266.jpg
3. End the COnnection. Kasi not Working ang Connection nyo, and magfafailed lang ang application na gamit nyo...
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0267.jpg http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0268.jpg
4. After ENDING THE CONNECTION. Balik kayo sa Operamini or ANY APPLICATION. Magtatanong ulit ng Connection na gagamitin niya sa PAGCONNECT, piliin nyo ulit ung same ACCESS POINT or USE A DIFFERENT ACCESS POINT.
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0269.jpg
5. Then Same as PROCEDURE #2, CHeck nyo ulit ang RECEIVED AND SENT BYES sa CONNECTION MANAGER, meron ng gumagalaw ng figures sa RECEIVED AND SENT DATA. WORKING NA ANG CONNECTION NYO!
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0270.jpg
6. Pagbalik nyo sa OperaMini / ANY Application. COnnected na...
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0271.jpg
ITO ANG MGA COMMON NA NAEEXPERIENCE SA MGA SUN USERS NA MINSAN SASABIHIN NILA NA NOT WORKING ANG SUN, KASI DI NILA NAKIKITA NA INACTIVE UNG CONNECTION, DAPAT I-END LANG ANG CONNECTION, THEN CHOOSE ULIT NG ACCESS POINT, THEN CHECK IF ACTIVE ANG CONNECTION (AS SHOWN SA SCREENSHOTS SA TAAS)
THIS TUTORIAL CAN BE DONE ON ALL MODIFIED / UNMODIFIED APPLICATIONS. :thumbsup:
dagdag ko na rin bro ed, pwede rin gamitin OM servers as IP sa SUN. Mas mabilis kumagat.
dagdag ko na rin bro ed, pwede rin gamitin OM servers as IP sa SUN. Mas mabilis kumagat.
If you found my TUTORIAL Educational, Don't Forget to click on :thanks:
INTRODUCTION:
Itong TUTORIAL na ito is pinost ko under NETWORK OPERATORS Section since main Concern nito is SUN Connection. Minsan kasi ITO ANG COMMON PROBLEM kaya ayaw magwork ang mga APPLICATIONS sa SUN. May times na UNSTABLE ang connection, and may gagawin ka lang para maTRY ULIT ANG CONNECTION. OK???
LET'S BEGIN..
I'LL BE USING AS AN EXAMPLE ANG OPERAMINI SA PAGCONNECT SA SUN NETWORK
1. When Starting to Connect using Operamini, magtatanong ng Access Point, then PIPILI tayo ng Access Point.
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0264.jpg http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0269.jpg
2. Then ang GAWIN NYO PARA MACHECK IF GOOD ANG CONNECTION SA SUN, Press MENU, then Go to your CONNECTION MANAGER. THen Options, press DETAILS, Then makikita nyo ang Received and Sent IF KAHIT ISA SA RECEIVED OR SENT BYTES IS VALUE NA IS ZERO I END NYO NA ANG CONNECTION. Kasi magfafailed to COnnect nun siya sa OPERAMINI, and as you can see INACTIVE ang CONNECTION.
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0265.jpg http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0266.jpg
3. End the COnnection. Kasi not Working ang Connection nyo, and magfafailed lang ang application na gamit nyo...
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0267.jpg http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0268.jpg
4. After ENDING THE CONNECTION. Balik kayo sa Operamini or ANY APPLICATION. Magtatanong ulit ng Connection na gagamitin niya sa PAGCONNECT, piliin nyo ulit ung same ACCESS POINT or USE A DIFFERENT ACCESS POINT.
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0269.jpg
5. Then Same as PROCEDURE #2, CHeck nyo ulit ang RECEIVED AND SENT BYES sa CONNECTION MANAGER, meron ng gumagalaw ng figures sa RECEIVED AND SENT DATA. WORKING NA ANG CONNECTION NYO!
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0270.jpg
6. Pagbalik nyo sa OperaMini / ANY Application. COnnected na...
http://i417.photobucket.com/albums/pp255/eduard816/Screenshot0271.jpg
ITO ANG MGA COMMON NA NAEEXPERIENCE SA MGA SUN USERS NA MINSAN SASABIHIN NILA NA NOT WORKING ANG SUN, KASI DI NILA NAKIKITA NA INACTIVE UNG CONNECTION, DAPAT I-END LANG ANG CONNECTION, THEN CHOOSE ULIT NG ACCESS POINT, THEN CHECK IF ACTIVE ANG CONNECTION (AS SHOWN SA SCREENSHOTS SA TAAS)
THIS TUTORIAL CAN BE DONE ON ALL MODIFIED / UNMODIFIED APPLICATIONS. :thumbsup:
dagdag ko na rin bro ed, pwede rin gamitin OM servers as IP sa SUN. Mas mabilis kumagat.
dagdag ko na rin bro ed, pwede rin gamitin OM servers as IP sa SUN. Mas mabilis kumagat.
If you found my TUTORIAL Educational, Don't Forget to click on :thanks: