hello po sa inyong lahat.. pwede po give me some advices kung saan site ko pwede kumuha ng mga skin ng motorola RAZR V3xx at pano ko sila iinstal sa fone ko mismo..

Thank you po.. :)

kailangan may monsterpack ka at iflaflash mo to sa phone mo parang nirereformat at kailangan meron ka flash and backup

bawal ata mag lagay ng site eh !

Before you mod your V3xx, you need to obtain a few things. DON'T INSTALL ANYTHING YET. We will do that after. Here are the most common items you will need:







Now, first of all you will need to download and install the UID Extraction Tool from the MotoDev downloads page. Once installed run the UID Extraction Tool and plug in your V3xx (make sure your V3xx is in data/fax mode). Now The Found New Hardware Wizard will pop up. Select "No not this time" and click next.
http://www.poeticfolly.com/motoguide/gurus/L7/GetConnected/1.JPG


The hardware wizard will now look something like this. It will be helping you install one of the following: Motorola USB Modem, Motorola Accessory, Data Logging MCU Interface, Test Command Interface, or Motorola Flash Interface. Select "Install from a list or specific location" and select next.
http://www.poeticfolly.com/motoguide/gurus/L7/GetConnected/2.JPG


You will advance to the next step. Check the "Include this location" box and hit browse.
http://www.poeticfolly.com/motoguide/gurus/L7/GetConnected/3.JPG


Browse to the directory where you installed the UID Extraction Tool and select the appropriate folder containing your drivers (either the Winxp or Win2k folder). Select OK.
http://www.poeticfolly.com/motoguide/gurus/L7/GetConnected/4.JPG

Now your screen will look something like the one below. Click next.
http://www.poeticfolly.com/motoguide/gurus/L7/GetConnected/5.JPG


A new screen will pop up saying that your device is being installed
http://www.poeticfolly.com/motoguide/gurus/L7/GetConnected/6.JPG

Before it is done installing you will have a pop up saying that the device you are installing is not windows certified. Click "Continue Anyway."
http://www.poeticfolly.com/motoguide/gurus/L7/GetConnected/7.JPG


The installation will resume.
http://www.poeticfolly.com/motoguide/gurus/L7/GetConnected/8.JPG

When it is done you will see another screen click Finish.
http://www.poeticfolly.com/motoguide/gurus/L7/GetConnected/9.JPG


DO NOT UNPLUG your phone at this point. Another install window will pop up for the next driver. Follow the same instructions. When you are done you should have installed five drivers: Motorola USB Modem, Motorola Accessory, Data Logging MCU Interface, Test Command Interface, and Motorola Flash Interface.
Congrats you have gotten your phone connected and can now start your modding with P2k programs!!!

galing i learn na how