http://3.bp.blogspot.com/_qNFgsHp2dCk/Sr1NzN3ngOI/AAAAAAAACZs/8td4FHmcICk/s1600-h/windows-flashdrive.jpg

THIS TUTORIAL WITH PICTURE PARA HINDI PO TAYO MAGULUHAN HOW TO USE WINTOFLASH


WinToFlash Step by step Guide Install Windows XP from USB Flash drive:

Requirements:
-USB Flash disk/Flash drive/Pen drive/Thumb drive, etc
-Computer with CD/DVD drive to build this Windows XP setup Flashdisk (or you may use computer without CD/DVD drive, but you have to copy Windows XP setup files from another computer to your hard disk)
-Computer with or without CD/DVD drive (e.g. Aspire One)

Step 1:
Download WinToFlash here http://wintoflash.com/download/en/
from the Author: This software may contain bugs (spelling too).

so if you find any spelling error please write a comment and correct it
or report to support@novicorp.com
don't forget to write your WinToFlash version.

Step 2:
Extract the zip file, then double click on WinToFlash.exe

http://4.bp.blogspot.com/_qNFgsHp2dCk/Sr0xpECMB6I/AAAAAAAACXs/ztimTqdUOio/s1600-h/2.jpg

Step 3:
Click Accept button...

http://3.bp.blogspot.com/_qNFgsHp2dCk/Sr0yU1J0koI/AAAAAAAACX0/dGrisr391YU/s400/3.jpg

Step 4:

This program will transfer Windows setup from CD or DVD to flash drive Recommended to switch on Wizard mode for users have no experience of Windows setup fine tuning Windows setup transfer wizard Following basic instructions you will transfer Windows setup program to flash drive and install Windows on PC have no CD or DVD drive

Click the button to enter Wizard mode...

http://4.bp.blogspot.com/_qNFgsHp2dCk/Sr0yyEUkcnI/AAAAAAAACX8/5zQiT4W31A0/s400/4.jpg

Step 5:

This program will help you to install Windows from a flash
To access other features and advanced options swicth to advanced mode (for advanced users).

for now, we will use wizard mode instead of advanced mode, so click Next...

http://1.bp.blogspot.com/_qNFgsHp2dCk/Sr02-35KbMI/AAAAAAAACYE/9sfU-c7Tk4M/s400/5.jpg

step 6:

Specify locations of files and drive

on Windows files path click Select button

http://1.bp.blogspot.com/_qNFgsHp2dCk/Sr04TuQPdEI/AAAAAAAACYM/9O13L1XE-V0/s400/6.jpg

Step 7:
Select CD/DVD drive that contain Windows XP CD or folder that contain Windows XP files... then click OK

http://4.bp.blogspot.com/_qNFgsHp2dCk/Sr1Aeyupi1I/AAAAAAAACYU/DvFo7u3A6k8/s400/7.jpg

step 8:

Specify locations of files and drive

on USB drive click Select button

http://3.bp.blogspot.com/_qNFgsHp2dCk/Sr1BrRUyHQI/AAAAAAAACYc/vM1Da6UZ0EM/s400/8.jpg


Step 9:
Select USB Flash drive ... then click OK

http://4.bp.blogspot.com/_qNFgsHp2dCk/Sr1CQcMvdiI/AAAAAAAACYk/op9JsJ3Ap4I/s400/9.jpg

Step 10:

Specify locations of files and drive

Click Next button...

http://4.bp.blogspot.com/_qNFgsHp2dCk/Sr1CxOUszHI/AAAAAAAACYs/C6t6p-oFkXo/s400/10.jpg

Step 12:

Warning! Formatting will erase ALL DATA on target disk. To format press OK, to quit press Cancel


Click OK...

http://2.bp.blogspot.com/_qNFgsHp2dCk/Sr1FL_TjzpI/AAAAAAAACY8/SdlEGriaB9M/s400/12.jpg

Step 13:
Please wait while WinToFlash transferring Windows setup to flash drive

http://3.bp.blogspot.com/_qNFgsHp2dCk/Sr1F5mshBRI/AAAAAAAACZE/bhvICCL7NDU/s400/13.jpg

Step 14:
Finished... click Next then Exit
USB Flash drive ready...

http://2.bp.blogspot.com/_qNFgsHp2dCk/Sr1HUegxcDI/AAAAAAAACZU/YetsUoSD_3E/s400/14.jpg

http://3.bp.blogspot.com/_qNFgsHp2dCk/Sr1HU-iIp-I/AAAAAAAACZc/eop9jK3goBo/s400/15.jpg

On computer without CD/DVD drive (e.g. Aspire One)
you must change the first boot order to USB Flash drive from BIOS. How to do this?

Change Boot order from BIOS:
This is just for example (Aspire 4710)
your BIOS interface may be slightly different

END OF TUTORIAL HOW TO USE WINTOFLASH



Step 1:
Plug a Flash drive into a USB port on your computer/laptop

What you need:

1) An empty USB flash drive, at least 1 GB in size (Is it necessary to be empty? Yes, because the program we will use formats the USB drive before copying window files)
2) NoviCorp Wintoflash download here (http://hotfile.com/dl/26884419/8c5ffa2/WinToFlash.rar.html)
(NOTE: As of this writing, the program is still in beta, though I have not encountered any error or problem using it, we all know that using beta softwares may cause problems or still has some bugs in it.)
3. Windows XP installer CD or a copy to your hard drive.


Steps on installing Windows Xp from Flash Drive:
1. Prepare your flash drive. Run WinToFlash.exe and choose the wizard.

http://3.bp.blogspot.com/_JbBl6k5xSgs/SqseSDepRKI/AAAAAAAABLY/_Yhza_NJkxc/s400/wintoflashwizard.PNG

http://4.bp.blogspot.com/_JbBl6k5xSgs/SqseSZBthRI/AAAAAAAABLg/tPe_BxgeRTc/s400/wintoflashwizard2.PNG

This one is self explanatory. Windows files path would be your Windows CD and USB drive is your flash disk. Next window will be copying the setup files to your flash drive. In took about 30 minutes in my test using a 2 GB KingMax flash drive (I believe this result may vary depending on the speed of your source and your USB drive).

2. Turn on your laptop. Enter BIOS by pressing F2. Make sure that SATA Controller Mode is set to Compatible under Configuration. If you do not do this, the windows installer will not see your hard disk upon setup. Now Save and Exit.

http://3.bp.blogspot.com/_JbBl6k5xSgs/Sqsh4MYlFkI/AAAAAAAABLo/j_uP7Y2aLSk/s400/serena+004+%28Small%29.jpg

3. Upon restart press F12 to choose Boot Device. Select your Flash Drive from the list

http://2.bp.blogspot.com/_JbBl6k5xSgs/Sqsi2Os4OBI/AAAAAAAABLw/LYDuAz6w0bo/s400/select+boot+device.jpg

4. This window will appear. Select 1st, text mode setup (boot from flash again after finish) here. You will now see the usual setup process when you install windows from CD.
http://1.bp.blogspot.com/_JbBl6k5xSgs/SqsjIwGsLtI/AAAAAAAABL4/Bdoeh0Vo9h8/s400/select+operating+system+to+start.jpg

http://1.bp.blogspot.com/_JbBl6k5xSgs/SqsjIwGsLtI/AAAAAAAABL4/Bdoeh0Vo9h8/s400/select+operating+system+to+start.jpg

5. When the initial copying of files is finish and the system restarts, you need to boot from flash drive again. But this time you will choose the first option in the picture above. (2nd, GUI mode setup). You will choose this option until the next 2 restarts and the first boot of windows. If you let it boot in hard disk, you will receive the error:
Windows could not start because the following files is missing or corrupt:
\system32\hal.dll
Please re-install a copy of the above file.
If that happens, just restart your laptop and choose to boot from flash drive. Installation of windows finished after 35 minutes in my test. It may vary depending on the speed of your laptop and your USB drive.

http://1.bp.blogspot.com/_JbBl6k5xSgs/SqslGcvqgRI/AAAAAAAABMA/B9wiy5ZKDlY/s400/Lenovo+S10-2+Windows+XP.jpg

solution for hai problem
1. Restart the PC. The hal.dll error could be a fluke.

2. Check for proper boot order in BIOS. You might see the hal.dll error if the boot order in BIOS is first looking at a hard drive other than your main hard drive.

Note: If you've recently changed your boot order or recently flashed your BIOS, this may be what's causing your problem.

3. Run Windows XP System Restore from a command prompt. If this doesn't work or you're receiving the hal.dll error message before you're able to complete this process, move on to the next step.

4. Repair or replace the boot.ini file. This will work if the cause of the problem is actually Windows XP's boot.ini file and not the hal.dll file, which is often times the case.

Note: If repairing the boot.ini does correct the hal.dll issue but the problem reappears after a reboot and you've recently installed Internet Explorer 8 in Windows XP, uninstall IE8. In this specific situation, IE8 could be the root cause of your hal.dll problem.

5. Write a new partition boot sector to the Windows XP system partition. If the partition boot sector has become corrupt or isn't properly configured, you may receive the hal.dll error.

6. Recover data from any bad sectors on your hard drive. If the physical part of your hard drive that stores any part of the hal.dll file has been damaged, you're likely to see errors like this.

7. Restore the hal.dll file from the Windows XP CD. If the hal.dll file is truly the cause of the problem, restoring it from the original Windows XP CD may do the trick.

8. Perform a repair installation of Windows XP. This type of installation should replace any missing or corrupt files. Continue troubleshooting if this does not resolve the issue.

9. Perform a clean installation of Windows XP. This type of installation will completely remove Windows XP from your PC and install it again from scratch.

Note: While this will almost certainly resolve any hal.dll errors, it is a time consuming process due to the fact that all of your data must be backed up and then later restored.

Important: If you can't gain access to your files to back them up, you should understand that you will lose them all if you continue with a clean installation of Windows XP.

10. Test the hard drive. If all else has failed, including the clean installation from the last step, you're most likely facing a hardware issue with your hard drive but you'll want to test it to be sure.

If the drive fails any of your tests, replace the hard drive and then complete a "new" installation of Windows XP.




IF PROBLEM PERSIST GO HERE FINAL SOLUTION (http://komku.blogspot.com/2008/11/install-windows-xp-using-usb-flash-disk.html?showComment=1255011237278)

to solve hai.dll error or need usb to boot properly here's the solution

1. right click my computer/properties/advanced/startup and recovery/settings/click edit
now you will see this

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /usepmtimer

if you notice the rdisk 1 thats the problem because it read the usb as pirimary boot up instead the hdd just change it to 0

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /usepmtimer

IF THIS NOT HELP YOU PLS LET ME KNOW ^^


just incase na sa itaas ay hindi work sayo... here's some alternatives na galing kay sir KOMKU.. MEDYO MADUGO LAMANG PERO 100% WALANG DEFECT IKA NGA...( SIR KOMKU YOUR THE BEST IN REGARDING IN USB XP ^^)

http://komku.blogspot.com/2008/11/install-windows-xp-using-usb-flash-disk.html

yup i agree... pero hindi lang WINDOWS XP ang pwede....

eto rin ang ginamit ko nung nag install ako ng WINDOW 7.....

^_^

try and tested in acer notebook...
if any problem or question pls let me know...

wala naman links ung program eh....

ayan po updated link na po

pwede ba to sa mga desktop pc na pang format or sa laptop lang talga?

kahit saan as long supported ang boot sa usb

I have an Acer Netbook, tried your instructions pero ang nakita ko dun sa SATA Controller Mode na option is IDE at saka ACHI, alin po dito sa dalawa ang pipiliin ko as Equivalent sa Compatible as per your Instruction #2?

Edit: Ano po gagawin dito... Line 33 of the INF file /$win_NT$. ~BT\winnt.sif is invalid. Set-up cannot continue.

Ide sir,, then always remember follow the instruction carefully...

When the initial copying of files is finish and the system restarts, you need to boot from flash drive again. But this time you will choose the first option in the picture above. (2nd, GUI mode setup). You will choose this option until the next 2 restarts and the first boot of windows. If you let it boot in hard disk, you will receive the error:
Windows could not start because the following files is missing or corrupt:
\system32\hal.dll
Please re-install a copy of the above file.

Natapos na sya nag install then nag reboot, nung pinili ko yung option na 2nd, GUI mode. eto ang error na lumabas

Windows could not start because the following file is missing or corrupt:
<Windows root>\systems32\hal.dll

Edit: ok na boss, ni run ko lang yung debug sa first option. thanks a lot

Nice Cool....

when the initial copying of files is finish and the system restarts, you need to boot from flash drive again. But this time you will choose the first option in the picture above. (2nd, gui mode setup). You will choose this option until the next 2 restarts and the first boot of windows. If you let it boot in hard disk, you will receive the error:
Windows could not start because the following files is missing or corrupt:
\system32\hal.dll
please re-install a copy of the above file.

Natapos na sya nag install then nag reboot, nung pinili ko yung option na 2nd, gui mode. Eto ang error na lumabas

windows could not start because the following file is missing or corrupt:
<windows root>\systems32\hal.dll

edit: Ok na boss, ni run ko lang yung debug sa first option. Thanks a lot


welcome ^_~

pang laptop lng po ba ito?

Sir after bang iselect nung 1st option anu na poh yung lalabas?

After po ba nun pwede na poh ba gumawa ng partition saka iinstall ng fresh windows?

Pakisagot po pls..

Di ko pa kasi matry naghahanap pa ako ng flashdrive..

bat pag nag boot sa flashdrive pa din. pano gagawin ko? tia.

Sir after bang iselect nung 1st option anu na poh yung lalabas?

After po ba nun pwede na poh ba gumawa ng partition saka iinstall ng fresh windows?

Pakisagot po pls..

Di ko pa kasi matry naghahanap pa ako ng flashdrive..

yup.. follow carefully po sa instruction... then pag naboot mo sa flash drive.. kung panung ginagawa mo cd as format or install windows same lang po pag nandun kana sa windows installation ^^

bat pag nag boot sa flashdrive pa din. pano gagawin ko? tia.

what do you mean po na pag nagboot sa flash drive parin???

did you carefully follow the instruction.. if not not.. missing files kalalabasan nian magiging depended yan sa flashdrive to just boot up..

T/S this is useful, :thanks:

bat pag nag boot sa flashdrive pa din. pano gagawin ko? tia.

follow this link po hope this solve your prob click me (http://komku.blogspot.com/2008/11/install-windows-xp-using-usb-flash-disk.html?showComment=1255011237278)

do i have to do the process all over again? kase nainstall ko na eh, in fact i'm using it now. kaso everytime na gagamitin ko, need ko pa din i insert yung flash drive para mag boot.

Kaka update ko lang po meron procedure kung panu ideal prob.. ^_~

wala bang ibang link ng wintoflash?
asar kasi isp namin
bagal ng dl pag sa hotfile!!!
mf na lang bossing?
parang awa mo na? apir!!!

hindi ba pede pag dinownload lang yung setup ng windows xp tas itransfer sa USB, kase nagdownload aku ng windows xp sp3, tas nasa i386 lang sha na folder, nung inispecify ko na yug location ng windows file ko, hindi sha madetect nakalagay "Incorrect source of Windows files"..


help po sir kung panu maresolve..

Otor, anung brand and exact unit ng notebook na na-install nyo na ang win xp. Meron po akong acer emd250 but i cant install either using a flash drive or a cd-rom. Help plzzz

TS ask ko lang po kung pwede po ba to kahit sira yung os tapos gagamitin pang pormat? sira kasi yung cdrom drive ng laptop ng friend ko kaya di ko mapormat eh..tinry ko na rin yung external hard disk pero ayaw,

TS pwede po bang pamirror sa mediafire? kung ok lang po?

pede naman po gamitin ng format ^^

Otor, anung brand and exact unit ng notebook na na-install nyo na ang win xp. Meron po akong acer emd250 but i cant install either using a flash drive or a cd-rom. Help plzzz

sir check nio po sa bios settings ng laptop mo kung supported niya boot to usb or flash drive??

ahh. mas naiintindihan ko ngayon yan.. meron kasing ibang software na gamit rin pang-gawa ng bootable Flash disk.

http://www.mediafire.com/?wmynmnymnmz

para po gusto sa mf..

im currently formatting my Lifebook using this procedure..

post comments later..

Thanks TS

Thanks TS,

tapos na formatting..

everything ran smoothly..

never got a problem..

Thanks TS,

tapos na formatting..

everything ran smoothly..

never got a problem..

thnx for the feedback sir ^^

What you need:

1) An empty USB flash drive, at least 1 GB in size (Is it necessary to be empty? Yes, because the program we will use formats the USB drive before copying window files)
2) NoviCorp Wintoflash download here (http://hotfile.com/dl/26884419/8c5ffa2/WinToFlash.rar.html)
(NOTE: As of this writing, the program is still in beta, though I have not encountered any error or problem using it, we all know that using beta softwares may cause problems or still has some bugs in it.)
3. Windows XP installer CD or a copy to your hard drive.


Steps on installing Windows Xp from Flash Drive:
1. Prepare your flash drive. Run WinToFlash.exe and choose the wizard.

http://3.bp.blogspot.com/_JbBl6k5xSgs/SqseSDepRKI/AAAAAAAABLY/_Yhza_NJkxc/s400/wintoflashwizard.PNG

http://4.bp.blogspot.com/_JbBl6k5xSgs/SqseSZBthRI/AAAAAAAABLg/tPe_BxgeRTc/s400/wintoflashwizard2.PNG

This one is self explanatory. Windows files path would be your Windows CD and USB drive is your flash disk. Next window will be copying the setup files to your flash drive. In took about 30 minutes in my test using a 2 GB KingMax flash drive (I believe this result may vary depending on the speed of your source and your USB drive).

2. Turn on your laptop. Enter BIOS by pressing F2. Make sure that SATA Controller Mode is set to Compatible under Configuration. If you do not do this, the windows installer will not see your hard disk upon setup. Now Save and Exit.

http://3.bp.blogspot.com/_JbBl6k5xSgs/Sqsh4MYlFkI/AAAAAAAABLo/j_uP7Y2aLSk/s400/serena+004+%28Small%29.jpg

3. Upon restart press F12 to choose Boot Device. Select your Flash Drive from the list

http://2.bp.blogspot.com/_JbBl6k5xSgs/Sqsi2Os4OBI/AAAAAAAABLw/LYDuAz6w0bo/s400/select+boot+device.jpg

4. This window will appear. Select 1st, text mode setup (boot from flash again after finish) here. You will now see the usual setup process when you install windows from CD.
http://1.bp.blogspot.com/_JbBl6k5xSgs/SqsjIwGsLtI/AAAAAAAABL4/Bdoeh0Vo9h8/s400/select+operating+system+to+start.jpg

http://1.bp.blogspot.com/_JbBl6k5xSgs/SqsjIwGsLtI/AAAAAAAABL4/Bdoeh0Vo9h8/s400/select+operating+system+to+start.jpg

5. When the initial copying of files is finish and the system restarts, you need to boot from flash drive again. But this time you will choose the first option in the picture above. (2nd, GUI mode setup). You will choose this option until the next 2 restarts and the first boot of windows. If you let it boot in hard disk, you will receive the error:
Windows could not start because the following files is missing or corrupt:
\system32\hal.dll
Please re-install a copy of the above file.
If that happens, just restart your laptop and choose to boot from flash drive. Installation of windows finished after 35 minutes in my test. It may vary depending on the speed of your laptop and your USB drive.

http://1.bp.blogspot.com/_JbBl6k5xSgs/SqslGcvqgRI/AAAAAAAABMA/B9wiy5ZKDlY/s400/Lenovo+S10-2+Windows+XP.jpg

solution for hai problem
1. Restart the PC. The hal.dll error could be a fluke.

2. Check for proper boot order in BIOS. You might see the hal.dll error if the boot order in BIOS is first looking at a hard drive other than your main hard drive.

Note: If you've recently changed your boot order or recently flashed your BIOS, this may be what's causing your problem.

3. Run Windows XP System Restore from a command prompt. If this doesn't work or you're receiving the hal.dll error message before you're able to complete this process, move on to the next step.

4. Repair or replace the boot.ini file. This will work if the cause of the problem is actually Windows XP's boot.ini file and not the hal.dll file, which is often times the case.

Note: If repairing the boot.ini does correct the hal.dll issue but the problem reappears after a reboot and you've recently installed Internet Explorer 8 in Windows XP, uninstall IE8. In this specific situation, IE8 could be the root cause of your hal.dll problem.

5. Write a new partition boot sector to the Windows XP system partition. If the partition boot sector has become corrupt or isn't properly configured, you may receive the hal.dll error.

6. Recover data from any bad sectors on your hard drive. If the physical part of your hard drive that stores any part of the hal.dll file has been damaged, you're likely to see errors like this.

7. Restore the hal.dll file from the Windows XP CD. If the hal.dll file is truly the cause of the problem, restoring it from the original Windows XP CD may do the trick.

8. Perform a repair installation of Windows XP. This type of installation should replace any missing or corrupt files. Continue troubleshooting if this does not resolve the issue.

9. Perform a clean installation of Windows XP. This type of installation will completely remove Windows XP from your PC and install it again from scratch.

Note: While this will almost certainly resolve any hal.dll errors, it is a time consuming process due to the fact that all of your data must be backed up and then later restored.

Important: If you can't gain access to your files to back them up, you should understand that you will lose them all if you continue with a clean installation of Windows XP.

10. Test the hard drive. If all else has failed, including the clean installation from the last step, you're most likely facing a hardware issue with your hard drive but you'll want to test it to be sure.

If the drive fails any of your tests, replace the hard drive and then complete a "new" installation of Windows XP.




IF PROBLEM PERSIST GO HERE FINAL SOLUTION (http://komku.blogspot.com/2008/11/install-windows-xp-using-usb-flash-disk.html?showComment=1255011237278)

kritikal to ah...:think:pero sige ma try narin...thnks po dito..:salute:

try and tested in acer notebook...
If any problem or question pls let me know...

i cant install on acer emd250, laging may error lumalabas, i tried ide pero wala parin eh, tried different cd's and usb but still problem exits, help naman po pls... Thanks in advance!

ts nare4mat q n po using usb ung pc q.. i follow all your instructions po pero after ng mainstall nagkaroon po ng error..
http://i35.tinypic.com/mcq55i.jpg

sir try this to solve your problem http://www.zolved.com/synapse/view_content/28059/I_get_an_error_message_Exception_Processing_Messag e_c0000013

after magamit ang USB as a boot device pwede ba siya ma revert back to being a normal flashdrive???

after magamit ang USB as a boot device pwede ba siya ma revert back to being a normal flashdrive???

yes if hindi mo na siya gagamitin as pang reformat ^^

Thank you in advance pero pahingi naman sana ng link. Hindi ko sya madownload sa hotfile eh.

yes if hindi mo na siya gagamitin as pang reformat ^^

pano rin naman???
may steps pa ba akong dapat i take o pwede na diretso reformat or delete lahat ng laman ng USB ko???

deretsong format na sir :) para mabura na rin yung bootable part niya po ^^

thanks for sharing
everything ran smoothly..
pero ayaw po mag install ng microsoft office 2007
cannot update daw po...
pero same installer po ay nakapag install naman
po me sa ibang pc...okay naman po...
dun lang po sa laptop na nireformat using
this procedure lang po ayaw ng ms office 2007
pa help naman po...

thanks in advance...

Sis sana makatulong sayo toh ^^

Sis sana makatulong sayo toh ^^


thank you po ate. I've learned alot from you... Cge, ittry ko ung mga tips mo maya maya... Hope mag work..

What you need:

1) An empty USB flash drive, at least 1 GB in size (Is it necessary to be empty? Yes, because the program we will use formats the USB drive before copying window files)
2) NoviCorp Wintoflash download here (http://hotfile.com/dl/26884419/8c5ffa2/WinToFlash.rar.html)
(NOTE: As of this writing, the program is still in beta, though I have not encountered any error or problem using it, we all know that using beta softwares may cause problems or still has some bugs in it.)
3. Windows XP installer CD or a copy to your hard drive.


Steps on installing Windows Xp from Flash Drive:
1. Prepare your flash drive. Run WinToFlash.exe and choose the wizard.

http://3.bp.blogspot.com/_JbBl6k5xSgs/SqseSDepRKI/AAAAAAAABLY/_Yhza_NJkxc/s400/wintoflashwizard.PNG

http://4.bp.blogspot.com/_JbBl6k5xSgs/SqseSZBthRI/AAAAAAAABLg/tPe_BxgeRTc/s400/wintoflashwizard2.PNG

This one is self explanatory. Windows files path would be your Windows CD and USB drive is your flash disk. Next window will be copying the setup files to your flash drive. In took about 30 minutes in my test using a 2 GB KingMax flash drive (I believe this result may vary depending on the speed of your source and your USB drive).

2. Turn on your laptop. Enter BIOS by pressing F2. Make sure that SATA Controller Mode is set to Compatible under Configuration. If you do not do this, the windows installer will not see your hard disk upon setup. Now Save and Exit.

http://3.bp.blogspot.com/_JbBl6k5xSgs/Sqsh4MYlFkI/AAAAAAAABLo/j_uP7Y2aLSk/s400/serena+004+%28Small%29.jpg

3. Upon restart press F12 to choose Boot Device. Select your Flash Drive from the list

http://2.bp.blogspot.com/_JbBl6k5xSgs/Sqsi2Os4OBI/AAAAAAAABLw/LYDuAz6w0bo/s400/select+boot+device.jpg

4. This window will appear. Select 1st, text mode setup (boot from flash again after finish) here. You will now see the usual setup process when you install windows from CD.
http://1.bp.blogspot.com/_JbBl6k5xSgs/SqsjIwGsLtI/AAAAAAAABL4/Bdoeh0Vo9h8/s400/select+operating+system+to+start.jpg

http://1.bp.blogspot.com/_JbBl6k5xSgs/SqsjIwGsLtI/AAAAAAAABL4/Bdoeh0Vo9h8/s400/select+operating+system+to+start.jpg

5. When the initial copying of files is finish and the system restarts, you need to boot from flash drive again. But this time you will choose the first option in the picture above. (2nd, GUI mode setup). You will choose this option until the next 2 restarts and the first boot of windows. If you let it boot in hard disk, you will receive the error:
Windows could not start because the following files is missing or corrupt:
\system32\hal.dll
Please re-install a copy of the above file.
If that happens, just restart your laptop and choose to boot from flash drive. Installation of windows finished after 35 minutes in my test. It may vary depending on the speed of your laptop and your USB drive.

http://1.bp.blogspot.com/_JbBl6k5xSgs/SqslGcvqgRI/AAAAAAAABMA/B9wiy5ZKDlY/s400/Lenovo+S10-2+Windows+XP.jpg

solution for hai problem
1. Restart the PC. The hal.dll error could be a fluke.

2. Check for proper boot order in BIOS. You might see the hal.dll error if the boot order in BIOS is first looking at a hard drive other than your main hard drive.

Note: If you've recently changed your boot order or recently flashed your BIOS, this may be what's causing your problem.

3. Run Windows XP System Restore from a command prompt. If this doesn't work or you're receiving the hal.dll error message before you're able to complete this process, move on to the next step.

4. Repair or replace the boot.ini file. This will work if the cause of the problem is actually Windows XP's boot.ini file and not the hal.dll file, which is often times the case.

Note: If repairing the boot.ini does correct the hal.dll issue but the problem reappears after a reboot and you've recently installed Internet Explorer 8 in Windows XP, uninstall IE8. In this specific situation, IE8 could be the root cause of your hal.dll problem.

5. Write a new partition boot sector to the Windows XP system partition. If the partition boot sector has become corrupt or isn't properly configured, you may receive the hal.dll error.

6. Recover data from any bad sectors on your hard drive. If the physical part of your hard drive that stores any part of the hal.dll file has been damaged, you're likely to see errors like this.

7. Restore the hal.dll file from the Windows XP CD. If the hal.dll file is truly the cause of the problem, restoring it from the original Windows XP CD may do the trick.

8. Perform a repair installation of Windows XP. This type of installation should replace any missing or corrupt files. Continue troubleshooting if this does not resolve the issue.

9. Perform a clean installation of Windows XP. This type of installation will completely remove Windows XP from your PC and install it again from scratch.

Note: While this will almost certainly resolve any hal.dll errors, it is a time consuming process due to the fact that all of your data must be backed up and then later restored.

Important: If you can't gain access to your files to back them up, you should understand that you will lose them all if you continue with a clean installation of Windows XP.

10. Test the hard drive. If all else has failed, including the clean installation from the last step, you're most likely facing a hardware issue with your hard drive but you'll want to test it to be sure.

If the drive fails any of your tests, replace the hard drive and then complete a "new" installation of Windows XP.




IF PROBLEM PERSIST GO HERE FINAL SOLUTION (http://komku.blogspot.com/2008/11/install-windows-xp-using-usb-flash-disk.html?showComment=1255011237278)

to solve hai.dll error or need usb to boot properly here's the solution

1. right click my computer/properties/advanced/startup and recovery/settings/click edit
now you will see this

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /usepmtimer

if you notice the rdisk 1 thats the problem because it read the usb as pirimary boot up instead the hdd just change it to 0

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /usepmtimer

IF THIS NOT HELP YOU PLS LET ME KNOW ^^





tanx :yipee:

I'll try this. :nice:

salamat ill try it

:thanks: hitted ts..

pa try po boss

pa try po TS

Sis sana makatulong sayo toh ^^

thank you po sa reply....sorry po natagalan ang balik ko po..
pero nadownload ko na yung link tapos naextract pero after po
hindi pa rin po na install yung msoffice 2007... eto po yung error..
salamat po ulit sa tulong ...

pa subscribe bka kilnganin ko to :D

gusto ko po sana windows 7, applicable din po ba ito sa windows 7?

hmmm... try ko nlang siguro!

thanks po

Pa try..tamang tama...thanks :D

thanks sa share...:thumbsup:

any feedback?

i tried this pero bluescreen lang ang nangyayari.. :noidea:

msi u135dx N455 netbook akin..

cant install os.. :help:

bakit sakin invalid data source daw sa wintoflash... help po.. tama naman sana yung location ng data..

sir subukan ko.ung dom mate ko kac nagpainstall sakin ng os kaso sira ung dvdrom nya.sa wakas alam ko na kung panu.tnx po.:salute:

pang laptop lang po ba ito?

kuya, pede bang yung Windows XP Sp3 na OS eh download ko nalang??

pano po magiging procedure non?

invalid source daw eh, nung nilagay ko sa location eh sa dinownload kong OS..

d po ba pede ung download lang? dapat CD or DVD talaga?

:help:

kuya, pede bang yung Windows XP Sp3 na OS eh download ko nalang??

pano po magiging procedure non?

invalid source daw eh, nung nilagay ko sa location eh sa dinownload kong OS..

d po ba pede ung download lang? dapat CD or DVD talaga?

:help:

pede naman po sir kung image ung dinownload mo po...

example iso image.. then gamit ka nalang po ng pang mount like alcohol or magicdisc

pede naman po sir kung image ung dinownload mo po...

example iso image.. then gamit ka nalang po ng pang mount like alcohol or magicdisc

pag nadownload ko na po? anu na gagawin??

anu po ba dapat laman nung OS na nadownload ko pag na extract??

yung nadownload ko kasi eh eto error na nalabas??

mali lang ba yung nadownload ko? kaya ganito??

http://www.symbianize.com/attachment.php?attachmentid=275478&stc=1&d=1297163119

pagtapos na po ba toh pwd na alisin yung usb?? ung parang nagformat ka lang gamit yung usB?
reply po sa mga may ideas thnx po

One question po. .

Ilang GB ang applicable to Install XP or Win7 into USB?

Original Post by woopee012
pagtapos na po ba toh pwd na alisin yung usb?? ung parang nagformat ka lang gamit yung usB?
reply po sa mga may ideas thnx po


Yup. . Trouble Shooting yan gamit ang USB as a Bootable. .

Yup. . Trouble Shooting yan gamit ang USB as a Bootable. .

tnx po ahh.. parang nagformat ka din pala hehehe.. sa CD lang ako kasi ako ehh try ko to gawin sa bahay..

DONE hahaha...... before Windows XP Home Edition ngaun Welcome Windows 7 Ultimate Adikz thanks

@otor

Ask lng po. Na try nio na po ba mag-install nyan sa mga AMD base desktop PC? Kasi po sinubukan ko po yan sa mga AMD base PC(starting at socket 754 to AM2 mobo). Fine naman cya, nagboot, nagload lahat ng mga files nya pero pagdating sa part ng starting windows dun sa menu ng Repair using recovery console, install windows eh nag blue screen. If im not mistaken eto ang error code 0x0000007b. Hindi ko alam ko panu malampasan yan. If naencounter mo na po sir pa share naman kung panu malampasan ang part na yun ng di nag blu blue screen. :)

@otor

Ask lng po. Na try nio na po ba mag-install nyan sa mga AMD base desktop PC? Kasi po sinubukan ko po yan sa mga AMD base PC(starting at socket 754 to AM2 mobo). Fine naman cya, nagboot, nagload lahat ng mga files nya pero pagdating sa part ng starting windows dun sa menu ng Repair using recovery console, install windows eh nag blue screen. If im not mistaken eto ang error code 0x0000007b. Hindi ko alam ko panu malampasan yan. If naencounter mo na po sir pa share naman kung panu malampasan ang part na yun ng di nag blu blue screen. :)


sir meron yang issue regarding memory mo...
yes sir try and tested ko na po iyan sa lahat ng amd desktop.. dahil sa araw na araw kong pag assemble, format usb lang ang gamit ko sir ^^ hindi na ako nagamit ng cd...

incase na sakaling hindi po masundan ung guide sa first post ko po papalitan natin ng mas detalyado at malaman na kaalaman ^^

sir meron yang issue regarding memory mo...
yes sir try and tested ko na po iyan sa lahat ng amd desktop.. dahil sa araw na araw kong pag assemble, format usb lang ang gamit ko sir ^^ hindi na ako nagamit ng cd...

incase na sakaling hindi po masundan ung guide sa first post ko po papalitan natin ng mas detalyado at malaman na kaalaman ^^


What do you mean "issue regarding memory"?

Sir wala po problem sakin yung guide. Madali po sundan khit hindi ko na tignan yung sa first post (hindi nmn po sa pagmamayabang).


Yun talaga problem ko kung pano malalampasan yung blue screen na yun.. I've also tried the Multiboot ISO software and its d'same blue screen after magload ng files.

salamat po dito TS!

bookmark ko!

What do you mean "issue regarding memory"?

Sir wala po problem sakin yung guide. Madali po sundan khit hindi ko na tignan yung sa first post (hindi nmn po sa pagmamayabang).


Yun talaga problem ko kung pano malalampasan yung blue screen na yun.. I've also tried the Multiboot ISO software and its d'same blue screen after magload ng files.

sir did you research regarding sa error na nalabas po sayo

you can check here

http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm

thanks

additional for this thread
Conting kaalaman lang

If you doing this makesure sa paggawa m nito diable lhat ng antivirus at mga program na alm nting may delete na program...

sir. succesful naman pag transfer ko ng XP setup. pero pag bboot ko na sya. 1st boot ko ay si flashy. sabi e. NTLDR is missing. ... ano sa tingin mo boss problem?

sir. succesful naman pag transfer ko ng XP setup. pero pag bboot ko na sya. 1st boot ko ay si flashy. sabi e. NTLDR is missing. ... ano sa tingin mo boss problem?


nakapag format kanaba>> o mag sisimula palang po mag format???

kung yes???

dapat yung option 1 ang pipiliin mo sir...

talagang ntldr missing yan kung 2 agad pipiliin mo po

nice info po.. it helps a lot. :thumbsup:

sir. succesful naman pag transfer ko ng XP setup. pero pag bboot ko na sya. 1st boot ko ay si flashy. sabi e. NTLDR is missing. ... ano sa tingin mo boss problem?

same problem

nakapag format kanaba>> o mag sisimula palang po mag format???

kung yes???

dapat yung option 1 ang pipiliin mo sir...

talagang ntldr missing yan kung 2 agad pipiliin mo po

Sir. ganito po kasi

na move ko na un XP ko sa sa Flash drive gaya ng paliwanag mo sa TUT mo. then ok sa BIOS 1st boot ko is my Flash Drive(DVD Drive if CD/DVD right?) then ang ineexpect ko lumabas is ung "Press any key to enter to CD etc,etc." e ang lumabas is

NTLDR is missing, etcetc. na format ko na un PC ko. gumamit na lang ako ng DVD Drive, pero need ko pa rin ang tulong ninyo kasi I have 9 PC to reformat pa.at ok sana kung via Flash Drive na lang.

know nyo po ba sagot? salamat!!

boss bakit NTRLD missing ang lumalabas

Sir. ganito po kasi

na move ko na un XP ko sa sa Flash drive gaya ng paliwanag mo sa TUT mo. then ok sa BIOS 1st boot ko is my Flash Drive(DVD Drive if CD/DVD right?) then ang ineexpect ko lumabas is ung "Press any key to enter to CD etc,etc." e ang lumabas is

NTLDR is missing, etcetc. na format ko na un PC ko. gumamit na lang ako ng DVD Drive, pero need ko pa rin ang tulong ninyo kasi I have 9 PC to reformat pa.at ok sana kung via Flash Drive na lang.

know nyo po ba sagot? salamat!!

anu po ung model ng mobo mo sir??

and question supported ba niyan ang pag boot sa flash drive???

check muna sir...

if ayaw sa 1st boot priority..

meron option yung pc mo kung sino ang una i boot niya.. merong F9 ,F11 or F12 depende sa mobo mo..

I need some big big help and very urgent. Could you please help me with this? I made a dual boot option with windows 7 and windows XP, now the problem is, in windows XP mode, I need to change my SATA settings to IDE mode to make things work. Now, I wanted that my SATA would be on AHCI mode not on IDE mode. Since AHCI is the modern settings for HDDs and I prefer that option to use, since that's the setting I'm using on my windows 7 x64. I was trying lot of procedures for me to install the AHCI driver controller in windows XP but no luck.

Could somebody help me with this? I need XP urgently :(

Since I'm on a laptop, I can't use the F6 button on windows XP setup on a floppy disk, yet the setup cannot detect flash drives as a substitute for the floppy, so it fails :(

and oh btw,
Acer
HM55 Chipset


Please help, I'm already frustrated with this. Thanks :)

ina update p b to ni TS? mahirap na baka walang sumagot pag nagkamali hehe

sir ask lang may alam po ba kau na pwedeng dalawang OS ang save sa Flash drive, ex. WinXP and WinVista tpos mamimili na lng ako kng anu ibo-boot ko? Possible po ba yun? Thanks po.

working fine p pla to. tnx.up nyu sayang haha

TS wala bang WintoFlash Professional kahit working crack :lol:

kasi mukhang mas maganda pa iyon kaysa free or personal edition :salute:

thanks bro try ko maya to..

@otor

Ask lng po. Na try nio na po ba mag-install nyan sa mga AMD base desktop PC? Kasi po sinubukan ko po yan sa mga AMD base PC(starting at socket 754 to AM2 mobo). Fine naman cya, nagboot, nagload lahat ng mga files nya pero pagdating sa part ng starting windows dun sa menu ng Repair using recovery console, install windows eh nag blue screen. If im not mistaken eto ang error code 0x0000007b. Hindi ko alam ko panu malampasan yan. If naencounter mo na po sir pa share naman kung panu malampasan ang part na yun ng di nag blu blue screen. :)

I am not sure if this can also help you but I hope so. I encountered din iyong blue screen tapos ang error code is 0x0000007B. I read a fellow SB provided (thanks by the way) and what I did is I changed in the BIOS ung SATA to IDE. Let you know later what part pero after changing it to IDE, ayun voila! okay na sya.

pede rin b hiren dito?

lamat sa TS....masundan ko 2.....

pa save sir...
thanks for the information
mapag-aralan

sir patulong po pagkatapos ko mag reformat nang pc ko ok na. then yung sa installation process na biglang nag FATAL ERROR..


A fatal error occurred during installation.
yung OS ko po windows xp pro.
bagong bili.

patulong naman po.. SALAMAT po... sana matulungan nyo ko...

pentium 4 po pc ko.
American megatrends b un?
IDE Cable po.

ANO PO BA YUNG PWDE KONG GAWIN PARA MAAYOS MGA SIR?? PATULONG NAMAN PO!! pllzz baka may alam kayung mga pwde kong gawin sa pag BOOT. ko step by stetp po.. plzzz....

pa marka, try ko to sa lappy ko.. :thumbsup::thumbsup::thumbsup:

sir patulong po pagkatapos ko mag reformat nang pc ko ok na. then yung sa installation process na biglang nag FATAL ERROR..


A fatal error occurred during installation.
yung OS ko po windows xp pro.
bagong bili.

patulong naman po.. SALAMAT po... sana matulungan nyo ko...

pentium 4 po pc ko.
American megatrends b un?
IDE Cable po.

ANO PO BA YUNG PWDE KONG GAWIN PARA MAAYOS MGA SIR?? PATULONG NAMAN PO!! pllzz baka may alam kayung mga pwde kong gawin sa pag BOOT. ko step by stetp po.. plzzz....


corrupted ata yung os na naistall mo.. :upset::upset::upset:

corrupted ata yung os na naistall mo.. :upset::upset::upset:

sir hindi po.. bagong bili lang po un.. ilang beses nako nag reformat ganun pa din. FATAL ERROR.

sir patulong po pagkatapos ko mag reformat nang pc ko ok na. then yung sa installation process na biglang nag FATAL ERROR..


A fatal error occurred during installation.
yung OS ko po windows xp pro.
bagong bili.

patulong naman po.. SALAMAT po... sana matulungan nyo ko...

pentium 4 po pc ko.
American megatrends b un?
IDE Cable po.

ANO PO BA YUNG PWDE KONG GAWIN PARA MAAYOS MGA SIR?? PATULONG NAMAN PO!! pllzz baka may alam kayung mga pwde kong gawin sa pag BOOT. ko step by stetp po.. plzzz....

try mo magpalit ng IDE CABLE or check mo yung mismong HDD Mo..

pepede ding sa cdrom na gamit mo.. try mo din palitan ng ibang working cdrom...

try mo magpalit ng IDE CABLE or check mo yung mismong HDD Mo..

pepede ding sa cdrom na gamit mo.. try mo din palitan ng ibang working cdrom...

uhm sir ganito po kasi yung ngyari.
nung pag boot ko po ng cd n os ko.ok na nung mamimili na ko kung i- dedelete or mag ccreate na ko ng partions.nagtaka ako kung bakit nakalagay sa Local Disk C ko is (backup) at und sa local disk D ko ay ung original.(NUNG TROPA KO DATI NAG FORMAT NYAN.) so ginawa ko dnelete ko yung sa backup ko yung C. then nreformat ko na yung D.kasi yun yung Original. biglang yun tmuloytuloy ng magformat then sa installation na ng OS biglang nag FATAL ERROR. ilang beses na ngyari. hindi ko na alam gagawin. patulong naman po.

ganda sanang itry kaso ala ko dvd/cd rom haizt....

sir pede po ba to sa dell mini 910?

uhm sir ganito po kasi yung ngyari.
nung pag boot ko po ng cd n os ko.ok na nung mamimili na ko kung i- dedelete or mag ccreate na ko ng partions.nagtaka ako kung bakit nakalagay sa Local Disk C ko is (backup) at und sa local disk D ko ay ung original.(NUNG TROPA KO DATI NAG FORMAT NYAN.) so ginawa ko dnelete ko yung sa backup ko yung C. then nreformat ko na yung D.kasi yun yung Original. biglang yun tmuloytuloy ng magformat then sa installation na ng OS biglang nag FATAL ERROR. ilang beses na ngyari. hindi ko na alam gagawin. patulong naman po.

base ko nalang sa expirience ko sir.. try mo palitan memory mo... kung hindi gumana.

try mo ibang hdd ..

ito ang hinahanap ko matagal na...
mahirap kasi gamitin yung hirenCd..