weeman
15th Jan 2008 Tue, 18:07
patulong naman dito sa nakakaalam kung pano, gusto ko kasi mag-autorun ang pag-sscan ng clamwin portable ko everytime mag-aautoplay ang USB drive.
ang problem ko lang yung config ng freshclam di ko alam kung pano i-set.
attached yung buong config ko ng batch file in txt format.
Thanks.
http://img293.imageshack.us/img293/8272/zybersnap001uw1.jpg
weeman
15th Jan 2008 Tue, 20:41
patulong naman dito.:help:
hmx_ryan
16th Jan 2008 Wed, 15:44
If you that the portable clamwin which is also in you Flash Drive (USB), then all you need is an autorun.inf file inside the USB Flash Drive...
open the notepad and save it as autorun.inf and add these codes
[autorun]
open=MyAutorun.bat
PS: the attached MyAutorun.txt should be save as Batch file or MyAutorun.bat
weeman
16th Jan 2008 Wed, 17:32
If you that the portable clamwin which is also in you Flash Drive (USB), then all you need is an autorun.inf file inside the USB Flash Drive...
open the notepad and save it as autorun.inf and add these codes
PS: the attached MyAutorun.txt should be save as Batch file or MyAutorun.bat
yap, nagawa ko na yan, ang problema ko lang talaga ayaw mag-run yung clamwin na kasama sa batch file, pero yung iba nagru-run including yung magtatanong muna kung ii-scan yung flash drive o hindi bago i-launch ang portable menu. yun lang talagang pag-iiscan mismo ng clamwin ang ayw mag-run, kaya don sa last ng page nag-gegenerate ng log ng pag-scan pero blanko.
hmx_ryan
17th Jan 2008 Thu, 08:04
ang freshclam.conf ang problema mo bro... try mo daw mag DL ng bagong portable Clamwin or other portable AV...
weeman
18th Jan 2008 Fri, 20:01
ang freshclam.conf ang problema mo bro... try mo daw mag DL ng bagong portable Clamwin or other portable AV...
ngayon ko lang nakita reply, uu yung config nga problema di ko alam kung paano i-config. sige try ko hanap kung may bago. Thanks.