Mga bossing mag tatanong lang sana kung pano ba e fix ang nero ko, ver 6.6.1.15 , dati kasi sa nero 8 ako, it work for a month suddenly bigla na lang maghahang ang PC ko, so i change back to nero 6. nag work naman for a week din ayun bumalik na naman sa dati, na mag hang yung PC ko, is it something about sa nero or maybe sa PC ko, kasi i tried Tune Up Utilities ganun pa rin eh, di ko po alam wat solution dito. please help:help:

try to check your burning speed baka ang bilis masyado, just to set in normal speed yung recommended, baka masyado nakadistract ang burner mo sa system unit when you're writing files with larger burning speed. :D

uHmmm.. wag mo muna sir gamitin yung PC mo habang nag beburn.. wag ka muna mag net,game etc.
..w8 mo muna gang matpos yung burn mo...

try to check your burning speed baka ang bilis masyado, just to set in normal speed yung recommended, baka masyado nakadistract ang burner mo sa system unit when you're writing files with larger burning speed. :D


sir ganun parin eh, nasa lowest speed na ako still mag hahang parin siya


--------------------------------------------------------------------------------

uHmmm.. wag mo muna sir gamitin yung PC mo habang nag beburn.. wag ka muna mag net,game etc.
..w8 mo muna gang matpos yung burn mo...

di ko na nga ginagamit eh, na try ko ng mag wait for 30min still di nag hang na siya actually gumagalaw parin yung cursor ko but if i tried to click on the folders no effect na siya

please help

sir i have read this from some site a long time ago,(like 5months)
nakalimutan ko mismo yung URL pero sinave ko sa notepad

basahin mo to'
sorry copy paste lang yan mula sa website na nakita ko noon, naisip ko magiging useful to sakaling magkaproblema ako later in life.

ndi ko pa po sya na tetesting kaya use at own risk po to'

hope this helps.
------------------------------------------------
Aspi

WinXP does not come with an Aspi layer. So far almost 90% of the problems with WinXP and CD burning software are Aspi layer problems. After installing WinXP, before installing any CD burning software do a few things first:

1. Open up "My computer" and right click on the CD Recorder. If your CD recorder was detected as a CD recorder there will be a tab called "Recording". On this tab uncheck ALL of the boxes. apply or OK out of it and close my computer.

2. Next install the standard Aspi layer for NT. Reboot when asked. That's is. after the reboot you can install any of the currently working CD recording applications with no problems. If using CD Creator do not install direct CD or Take two as they are currently incompatible but Roxio has promised a fix as soon as XP is released.

---------------------------------------------
sir pa post po kung ano0 nangyari ha?
good luck!

ok bro. Now, try to check your IDE/ATAPI Controllers properties na nasa device manager, if your DMA (http://en.wikipedia.org/wiki/Direct_memory_access) is available or not. Make sure DMA is on/available for all devices on all IDE channels, check here (http://forum.digital-digest.com/showthread.php?s=&threadid=44808) for more info. and to enable DMA on IDE channels, check here how.

Enabling/ Checking DMA In Windows XP (http://club.cdfreaks.com/1712829-post5.html)

maghahang lang ba ang PC mo when you get burning? or there's some error or burning failure will appear? :unsure: do you save a log error about that? if you don't mind, kindly post the log error here para mareview din ng mga CS Team natin. :D

ano ba memory mo? ang nero kc memory dependent..pag wla nang memory na magamit, nafe-failed ang burning..

stop mo ung processes sa task manager na ndi mhalaga para magluwag ang memory at cpu usage..pag nagbuburn, umaabot sa 100% ang cpu usage..

tapos saka ka magburn, ung lower version ang gamitin mo para di mtakaw sa memory..

ok bro. Now, try to check your IDE/ATAPI Controllers properties na nasa device manager, if your DMA (http://en.wikipedia.org/wiki/Direct_memory_access) is available or not. Make sure DMA is on/available for all devices on all IDE channels, check here (http://forum.digital-digest.com/showthread.php?s=&threadid=44808) for more info. and to enable DMA on IDE channels, check here how.

Enabling/ Checking DMA In Windows XP (http://club.cdfreaks.com/1712829-post5.html)

maghahang lang ba ang PC mo when you get burning? or there's some error or burning failure will appear? :unsure: do you save a log error about that? if you don't mind, kindly post the log error here para mareview din ng mga CS Team natin. :D

naka on naman DMA eh, tama yung sinasabi ni ovelheta na di gamitin ang PC while burning kasi minsan tumutuloy tuloy siya in burning pag di ko ginagalaw, pero 1gb ang ram ko eh diba mas may capacity to.


gusto ko sanang mag end ng mga process sa task manager kaya lang di ko alam kung saan dito ang hindi importante, di ko maintindihan eh.

ok bro, if you don't mind, kindly post the nero log which locate from this directory.

C:\program files\ahead\nero\nerohistory.log

so we may view the current details of your nero. :D

eto po sir noosadz , thanks talaga sir