jovrea27
17th Jul '08 Thu, 03:22
THIS MAY VOID YOUR WARRANTY
IF U HAVE A BROKEN OR DAMAGED ANALOG STICK THIS IS WHAT U WILL NEED TO DO TO FIX IT.
what u need
1. screwdriver( yug maliit lang po ahihihi)
2. replacment analog joy stick
3. at matinong pag iisip
screwdriver eto po itsura ahihihihi joke
http://i58.photobucket.com/albums/g244/99026/PICT0045.jpg
dismateling psp guide
1st
Remove the 5 screws holding the faceplate as shown in the pictures below.
http://i58.photobucket.com/albums/g244/99026/PICT0036-1.jpg
2nd
http://i58.photobucket.com/albums/g244/99026/PICT0037.jpg
Now take the faceplate off.
eto po itsura ng replacment analog joy stick
http://i58.photobucket.com/albums/g244/99026/PICT0043.jpg
then step 3 na
Now remove the screws holding the analog stick as shown in the picture below.
http://i58.photobucket.com/albums/g244/99026/PICT0039.jpg
Now screw the new analog stick to the face plate
make sure u thighten the screws as tight as they can go.
P.S. Before u put back on the face plate make sure u did not touch the screen or get any dirt on it as u will have to remove the faceplate again to clean it.
Step.3
Now Screw the faceplate back on to the psp. make sure u tighten the screws as tight as they can.
NOW UR DONE
hope it can help you....
tnx to Alankellyeire of psphaking
IF U HAVE A BROKEN OR DAMAGED ANALOG STICK THIS IS WHAT U WILL NEED TO DO TO FIX IT.
what u need
1. screwdriver( yug maliit lang po ahihihi)
2. replacment analog joy stick
3. at matinong pag iisip
screwdriver eto po itsura ahihihihi joke
http://i58.photobucket.com/albums/g244/99026/PICT0045.jpg
dismateling psp guide
1st
Remove the 5 screws holding the faceplate as shown in the pictures below.
http://i58.photobucket.com/albums/g244/99026/PICT0036-1.jpg
2nd
http://i58.photobucket.com/albums/g244/99026/PICT0037.jpg
Now take the faceplate off.
eto po itsura ng replacment analog joy stick
http://i58.photobucket.com/albums/g244/99026/PICT0043.jpg
then step 3 na
Now remove the screws holding the analog stick as shown in the picture below.
http://i58.photobucket.com/albums/g244/99026/PICT0039.jpg
Now screw the new analog stick to the face plate
make sure u thighten the screws as tight as they can go.
P.S. Before u put back on the face plate make sure u did not touch the screen or get any dirt on it as u will have to remove the faceplate again to clean it.
Step.3
Now Screw the faceplate back on to the psp. make sure u tighten the screws as tight as they can.
NOW UR DONE
hope it can help you....
tnx to Alankellyeire of psphaking