Hello po sa lahat.
Meron po akong nabasa na thread regarding firmware update for SE phones. Offline updating po siya. And I have tried on my K610i and it was successful. And can also customize the menu.ml para sa type mo na menu interface.
Ang ginamit ko pala ay Phone XS kaya lang it takes time time lang po talaga.
Kung meron po kayo experience regarding updating firmware for SE phones pa share naman po.
Thanks in advance.

Does anyone who have a better program rather phone xc/xs.
The bruteforcing takes a lot of time..

Mga kababayan,
Good news lang po.
Courtesy of Lemming from SE-NSE

Here's how to
A) flash CID49 DB2010/DB2020 phones with PhoneXS 2 (by gbrooks3 & hendrix)

If you only want to upload / delete some files:
B) Uploading & deleting files with PhoneXS 2

note: XS++ should be used instead of Phone XS (download from here)

First of all:
Important: It may take up to 5 hours!! to finalize your phone. / Once you have started the procedure there's no way back
So don't flash your phone, if you need it in the next few hours.

VERY IMPORTANT THINGS:



+ You can download PhoneXS here:
http://www.uploads.sc/download.php?file=70...a61dca41b7e6b7d (2.10 Alpha3)



+ make sure that main firmware flash file & filesystem flash file & custpacks are available for your phone BEFORE you start flashing

+ After flashing a filesystem flash file, DON'T turn your phone on, until you have customized it

+ Always charge your battery to 100% before flashing

+ Remove SIM card & memorystick before flashing

+ If your phone is not recognized, remove battery & insert it again

+Use this tool with a DCU-60 cable (standard usb cable that came with your phone) or a service cable of your choice

+ Always use the latest USB drivers


Warning: Don't flash GSlide Firmwares to W810 - not possible at the moment!

a) Flashing with Phone XS 2

That really easy, we'll just need

a) Firmware main file
b) Filesystem file

Sources for these files:
Firmware main + filesystem:
http://www.topsony.com/foro/cmps_index.php?page=Firmwares


In this example we'll flash a K800 with firmware R1ED001 Generic and filesystem EUROPE_2.
So we'll head to topsony.com and download these 2 files:
K800_R1ED001_MAIN_GENERIC_WI_RED49.rar
K800_R1ED001_FS_EUROPE_2_RED49.rar

As these are .rar files, we have to extract them. That gives us:
K800_R1ED001_MAIN_GENERIC_WI.mbn
K800_R1ED001_FS_EUROPE_2.fbn


Now it's time to download & start Phone XS.

The first thing we have to do, is to select the cable we are using.
We'll use a USB DCU60 (standard usb cable) in this example, which means we have to select "USB" and press "Connect".

Now PhoneXS profiles our phone and outputs some information:


As we are going to flash our phone with MAIN and FS (filesystem) firmware, We activate "Flash Main", "Flash File System" and "Customize File System" and use K800_R1ED001_MAIN_GENERIC_WI.mbn as "Main Firmware" and K800_R1ED001_FS_EUROPE_2.fbn as "File System".
Because we are flashing a filesystem we also have to customize. To do that we select a compatible CDA. As we are flashing a EUROPE_2 filesystem, we use a EUROPE_2 custpack.


Finally click "Flash" and PhoneXS will do its magic.

Note: After clicking "Flash" it can take up to 5 hours to finish the procedure. If the programm hangs after a while, your phone is most likely low on power >> recharge it

That's all laugh.gif


b) Uploading & deleting files with PhoneXS 2


You don't want to flash a firmware, just do some file uploading?
Ok!
Then let's start.

After we have exctracted the tool, we'll have this folders:


The important folder is "files_to_upload". All files that are in this folder will be uploaded to the phone.

Let's say we want to upload a new menu.ml with some images to the phone. The location of these files on the phone is:
/tpa/preset/system/menu/

We'll have to create in "files_to_upload" a new folder called "tpa", in the folder "tpa" we create a new folder called "preset", and so on...

Finally we'll have the folder "\files_to_upload\tpa\preset\system\menu".
Into this folder we'll copy the new menu.ml and the images.

It will look like that:



To upload these files, we just start PhoneXS, connect and select "FSX" at the bottom to get to the upload menu & finally click "Start FSX".


PhoneXS will now upload our files in "files_to_upload" to the phone smile.gif

+If you need the original files from the filesystem, you can use this tool (by darkmen) to extract FS flash files:

*Link removed*

or download some files here:
http://www.topsony.com/foro/local_links.php?catid=13

shadow pano mag update ng offline?? san nkk pag download ng phone xs n libre? maraming salamat