jovrea27
21st Jul '07 Sat, 09:05
Super Airbrush Tutorial by jovrea27
First things first, we need a 'Before' shot. I quickly scanned the net for something appropriate and came up with the following:
http://www.zeke.com.au/tutorial/airbrush/before.jpg
A pretty girl, with some skin blemishes, the perfect candidate for my tutorial.
Step 1
After opening our image up in Photoshop, the first thing we will do is to use the Heal Brush to remove any obvious marks or blemishes. You can be as thorough as you like here, as the cleaner the skin is to start with, the better the results at the end. Use an appropriate brush size (quite small) in order to sample and brush away the blemishes without losing any important detail.
http://www.zeke.com.au/tutorial/airbrush/01_heal_brush.jpg
Step 2
Once you are finished with the Heal Brush, duplicate the layer and apply the Dust and Scratches filter.
Filter > Noise > Dust & Scratches
For this example, I used a radius of 5 pixels and a threshold of 0. You can adjust these to suit your image as needed. The result you are looking for is a creamy blend of features, without too much banding.
http://www.zeke.com.au/tutorial/airbrush/02_dust_scratches.jpg
Step 3
The next filter we are going to use is the good old Gaussion Blur. This will remove any banding that might have occurred in the previous step, and give the whole image a creamier complexion.
Filter > Blur > Gaussion Blur
I used a radius of 2 for this example. Again, adjust as appropriate for each image.
http://www.zeke.com.au/tutorial/airbrush/03_blur.jpg
Step 4
The final step in preparing our model's new complexion is to add some texture. We all know that human skin is not generally a creamy plastic looking substance, so by adding some noise we will give the process a more realistic look.
Filter > Noise > Add Noise
I used an amout of 0.7% noise, distributed uniformly with Monochromatic selected. As always, adjust to suit your image.
http://www.zeke.com.au/tutorial/airbrush/04_noise.jpg
Step 5
Ok! Our model's new 'skin' is now ready to use.
Add a layer mask to the layer we have been filtering and fill it with black. This will essentially cause the image to disappear and the layer beneath (our original) will show through. Don't worry - it's still there, it's just been hidden or 'masked'.
http://www.zeke.com.au/tutorial/airbrush/05_duplicate_mask.jpg
Step 6
Now comes the fun part! In this step we get the 'paint' the models new skin on. It is at this stage that a steady hand and attention to details comes to the fore.
Select the Brush Tool and make sure your colour selected is White. I initally chose a brush size of 30 pixels and a hardness of 0%. You will need to adjust the size of your brush as you progress over the image in order to fit into the tight corners etc.
The aim of the game at this step is to paint the 'new and improved' skin over the original skin, without interfering with the other detail we want to retain such as hair, eyes, mouth etc.
If you do accidently paint over something you didn't want to, simply change the brush colour to black and you can erase your errant work again.
http://www.zeke.com.au/tutorial/airbrush/06_brush.jpg
Step 7
Once you have finished your 'painting' you should have an image and layers pallette that appears something like this:
http://www.zeke.com.au/tutorial/airbrush/07_brush_finish.jpg
Step 8
Now for some minor cosemtic changes. Our model appeared a little red skinned (perhaps too much sun) so I need a quick way to balance the colour out a little. I will simply add a Hue/Saturation Adjustment Layer. Just a minor tweak by increasing the Hue slider by 6 points will even out the colour in this example.
Layer > New Adjustment Layer > Hue/Saturation
http://www.zeke.com.au/tutorial/airbrush/08_hue.jpg
Step 9
Now we will add another adjustment layer, but this time use a goold old fashioned Photo Filter. I chose Sepia with a density of 50% whilst preserving Luminosity. This will further settle the colours in our image and give a more realistic skin tone.
Layer > New Adjustment Layer > Photo Filter
http://www.zeke.com.au/tutorial/airbrush/09_photo_filter.jpg
Step 10
The bulk of our work is now done, but we are going to take a detour for a moment to liven up our model's eyes who's brightness may have suffered in our previous two steps.
We will created a new layer and make a circular selection to match our model's eye. We then simply fill the layer with a green colour of our choice and set the layer to Overlay.
http://www.zeke.com.au/tutorial/airbrush/10_eyes.jpg
Step 11
We then need to add a Layer Mask to our new inner eye and mask away (using a brush with black colour selected) the green that overlaps where it shouldn't.
Once we are happy with the shape of the new inner eye, we will reduce the opacity of the layer to around 30% to give a more natural colour.
http://www.zeke.com.au/tutorial/airbrush/11_eyes2.jpg
Remember to repeat this process for both eyes!
Step 12
The final process we will apply is to sharpen our image a little bit. Instead of using the normal Unsharp Mask filter, we will opt for a much better process, albeit a little more complicated for the first timer.
First up we need to duplicate our original layer. Simply drag the original layer onto the new layer button on the layers pallette - that will do the trick. Set this new layer to Overlay the original layer.
http://www.zeke.com.au/tutorial/airbrush/12_sharpen.jpg
Now apply a High Pass filter to the new layer.
Filter > Other > High Pass
http://www.zeke.com.au/tutorial/airbrush/13_high_pass.jpg
I used a radius of 23.2 pixels, but the main objective here is to get your preview to look a fraction over-sharpened.
Once that filter is applied you can adjust the opacity of the layer and it will increase/decrease the level of sharpening. A very handy layer indeed! I ended up with an opacity of 30%
http://www.zeke.com.au/tutorial/airbrush/14_sharpen2.jpg
ALL DONE
Wow, we've made it. What a marathon...
Our finished product should look something like this:
http://www.zeke.com.au/tutorial/airbrush/after.jpg
I hope someone finds this little tutorial useful... ;)
First things first, we need a 'Before' shot. I quickly scanned the net for something appropriate and came up with the following:
http://www.zeke.com.au/tutorial/airbrush/before.jpg
A pretty girl, with some skin blemishes, the perfect candidate for my tutorial.
Step 1
After opening our image up in Photoshop, the first thing we will do is to use the Heal Brush to remove any obvious marks or blemishes. You can be as thorough as you like here, as the cleaner the skin is to start with, the better the results at the end. Use an appropriate brush size (quite small) in order to sample and brush away the blemishes without losing any important detail.
http://www.zeke.com.au/tutorial/airbrush/01_heal_brush.jpg
Step 2
Once you are finished with the Heal Brush, duplicate the layer and apply the Dust and Scratches filter.
Filter > Noise > Dust & Scratches
For this example, I used a radius of 5 pixels and a threshold of 0. You can adjust these to suit your image as needed. The result you are looking for is a creamy blend of features, without too much banding.
http://www.zeke.com.au/tutorial/airbrush/02_dust_scratches.jpg
Step 3
The next filter we are going to use is the good old Gaussion Blur. This will remove any banding that might have occurred in the previous step, and give the whole image a creamier complexion.
Filter > Blur > Gaussion Blur
I used a radius of 2 for this example. Again, adjust as appropriate for each image.
http://www.zeke.com.au/tutorial/airbrush/03_blur.jpg
Step 4
The final step in preparing our model's new complexion is to add some texture. We all know that human skin is not generally a creamy plastic looking substance, so by adding some noise we will give the process a more realistic look.
Filter > Noise > Add Noise
I used an amout of 0.7% noise, distributed uniformly with Monochromatic selected. As always, adjust to suit your image.
http://www.zeke.com.au/tutorial/airbrush/04_noise.jpg
Step 5
Ok! Our model's new 'skin' is now ready to use.
Add a layer mask to the layer we have been filtering and fill it with black. This will essentially cause the image to disappear and the layer beneath (our original) will show through. Don't worry - it's still there, it's just been hidden or 'masked'.
http://www.zeke.com.au/tutorial/airbrush/05_duplicate_mask.jpg
Step 6
Now comes the fun part! In this step we get the 'paint' the models new skin on. It is at this stage that a steady hand and attention to details comes to the fore.
Select the Brush Tool and make sure your colour selected is White. I initally chose a brush size of 30 pixels and a hardness of 0%. You will need to adjust the size of your brush as you progress over the image in order to fit into the tight corners etc.
The aim of the game at this step is to paint the 'new and improved' skin over the original skin, without interfering with the other detail we want to retain such as hair, eyes, mouth etc.
If you do accidently paint over something you didn't want to, simply change the brush colour to black and you can erase your errant work again.
http://www.zeke.com.au/tutorial/airbrush/06_brush.jpg
Step 7
Once you have finished your 'painting' you should have an image and layers pallette that appears something like this:
http://www.zeke.com.au/tutorial/airbrush/07_brush_finish.jpg
Step 8
Now for some minor cosemtic changes. Our model appeared a little red skinned (perhaps too much sun) so I need a quick way to balance the colour out a little. I will simply add a Hue/Saturation Adjustment Layer. Just a minor tweak by increasing the Hue slider by 6 points will even out the colour in this example.
Layer > New Adjustment Layer > Hue/Saturation
http://www.zeke.com.au/tutorial/airbrush/08_hue.jpg
Step 9
Now we will add another adjustment layer, but this time use a goold old fashioned Photo Filter. I chose Sepia with a density of 50% whilst preserving Luminosity. This will further settle the colours in our image and give a more realistic skin tone.
Layer > New Adjustment Layer > Photo Filter
http://www.zeke.com.au/tutorial/airbrush/09_photo_filter.jpg
Step 10
The bulk of our work is now done, but we are going to take a detour for a moment to liven up our model's eyes who's brightness may have suffered in our previous two steps.
We will created a new layer and make a circular selection to match our model's eye. We then simply fill the layer with a green colour of our choice and set the layer to Overlay.
http://www.zeke.com.au/tutorial/airbrush/10_eyes.jpg
Step 11
We then need to add a Layer Mask to our new inner eye and mask away (using a brush with black colour selected) the green that overlaps where it shouldn't.
Once we are happy with the shape of the new inner eye, we will reduce the opacity of the layer to around 30% to give a more natural colour.
http://www.zeke.com.au/tutorial/airbrush/11_eyes2.jpg
Remember to repeat this process for both eyes!
Step 12
The final process we will apply is to sharpen our image a little bit. Instead of using the normal Unsharp Mask filter, we will opt for a much better process, albeit a little more complicated for the first timer.
First up we need to duplicate our original layer. Simply drag the original layer onto the new layer button on the layers pallette - that will do the trick. Set this new layer to Overlay the original layer.
http://www.zeke.com.au/tutorial/airbrush/12_sharpen.jpg
Now apply a High Pass filter to the new layer.
Filter > Other > High Pass
http://www.zeke.com.au/tutorial/airbrush/13_high_pass.jpg
I used a radius of 23.2 pixels, but the main objective here is to get your preview to look a fraction over-sharpened.
Once that filter is applied you can adjust the opacity of the layer and it will increase/decrease the level of sharpening. A very handy layer indeed! I ended up with an opacity of 30%
http://www.zeke.com.au/tutorial/airbrush/14_sharpen2.jpg
ALL DONE
Wow, we've made it. What a marathon...
Our finished product should look something like this:
http://www.zeke.com.au/tutorial/airbrush/after.jpg
I hope someone finds this little tutorial useful... ;)