PDA

View Full Version : Flash / upgrade your share mid-2330 safely, effectively, hassle free.



Pages : 1 2 [3] 4 5 6 7 8

kankz
3rd Mar 2013, 23:10
kuya naka default namn po.. taz po pg po pg nka special nasa left lng po un temple run..

bryella
3rd Mar 2013, 23:49
bro meron ka bang nung same rom na nirevised mo, pero di inverted yung TS? working kasi sa akin kaya lang inverted TS.. nkuha ko sa post mo sa kabilang thread yung rom na sinasabi kong inverted yung touch screen. thanks bro.

NikkoJames15
3rd Mar 2013, 23:59
kuya naka default namn po.. taz po pg po pg nka special nasa left lng po un temple run..

Uhm.. reinstall Temple Run? :lol:


bro meron ka bang nung same rom na nirevised mo, pero di inverted yung TS? working kasi sa akin kaya lang inverted TS.. nkuha ko sa post mo sa kabilang thread yung rom na sinasabi kong inverted yung touch screen. thanks bro.

Yung pinost ni putalittlemore na rev1, hanapin mo sa previous posts.

vonz25
4th Mar 2013, 04:31
Anung model ba ng tablet mo sir? :)





share mid-2330 sir...

NikkoJames15
4th Mar 2013, 05:02
share mid-2330 sir...

Haay.. Mahirap yung MID-2330 eh.. Daming revisions.. Best thing you can do if you don't want to look for another ROM is follow the insmod guide I posted and hope your ROM provided every .ko file you need.. :sigh:

vokz
4th Mar 2013, 12:36
SIR SKIN DIN PO SPRITE FAILED ANG LUMALABAS. MID 2330-S PO KASI ANG MODEL .. PLS. HELP.. TNX
:pray:

NikkoJames15
4th Mar 2013, 12:49
Mag-Livesuit na kasi.. :lol: Hit-and-miss nga yung PhoenixCard e. Yung mga Newcomer please backread.. IMHO dapat rule number one ng lahat ng forums yan..

NikkoJames15
5th Mar 2013, 05:21
Compiled posts. Para sa mga nagtatanong lagi. :lol::thumbsup:


Reflash instructions via LiveSuit 1.09

1. Download your ROM, an img file, either through my links or through putalittlemore's. Place it in a convenient location.
My ROM: You can see links before reply
putalittlemore's link: You can see links before reply
2. Download LiveSuit 1.09, from You can see links before reply
That is an installer, it will install the needed drivers for your tablet's Upgrade Mode.
3. Open LiveSuit 1.09, then click No when a tutorial dialogue appears. Click on the first icon (an orange cube), navigate to your convenient location, then select the ROM img.
4. Turn your tablet completely off. Insert the USB cable to the port in the tablet, then hold the volume up key.
5. Insert the other end of the USB cable to the USB port of your PC, while still holding the volume up key.
6. While still holding the volume up key, press the power button once every second, continue until the computer detects it and after it installs the driver, you can release the keys.
7. After driver installation, a dialogue box will appear asking if you would like a Forced Upgrade or a Normal Upgrade. Select Yes. LiveSuit will prompt you a second time. Answer Yes again,
8. Wait for it to finish, and when the Upgrade Succeeds appears on your screen, you have reflashed the tablet.
9. Cross your fingers and wait for the lock screen to appear. If it does, check if everything is working. If not, then you have to look for another ROM to flash.

There you have it. A fool-proof guide. Hopefully. ;):lol: No guarantee that the ROMs will work 100%.
Ubos English wew. :praise::lol:


Regarding LiveSuit 1.09:
Problem - Solution
1. Device not recognized/jump to upgrade mode failed - make sure you follow the combination properly. Otherwise it will boot to normal or recovery mode. We want upgrade mode, not recovery. :)
2. Stuck in green/flashing Android logo - ROM not compatible.
3. Non-working WiFi, G-Sensor, etc. - Find a ROM that works close to 100%, do an lsmod via ADB Shell (Google how), then paste it here. :thumbsup:
4. Inverted touch screen - See below

Fix for inverted capacitive touch screen:
1. Extract ROM using ImageSuite (drag img file to extract_img.bat)
2. Inside image.img.dump folder, open COMMON _SYS_CONFIG100000 using Notepad++
3. Find ctp_para, edit ctp_revert_x_flag or ctp_revert_y_flag, 1 or 0 lang yung value, x for horizontal inverted, y for vertical inverted, both for completely inverted. Kung 0 yung value gawin mong 1, kung 1 yung value gawin mong 0
4. Open MagicISO, then open RFSFAT16_BOOTLOADER_00000
5. Copy script.bin and script0.bin to any convenient folder. Extract contents of ScriptUnscript.7z to the same folder.
6. Drag script.bin to unscript.bat, edit ctp_revert_x_flag and cto_revert_y_flag on script.bin (unscript.bat and bin2fex will create a file called sys_config1.fex, this is what you will edit) using Notepae++
7. Drag sys_config1.fex to script.exe to convert it to sys_config1.bin, then rename to script.bin.
NOTE: If any error is encountered, find and replace all instances of P? with power inside sys_config1.fex file before reconverting.
8. Repeat steps 6 and 7 for script0.bin (same NOTE applies)
9. Replace files in RFSFAT16_BOOTLOADER_00000 with edited ones
10. Save the image
11. Drag image.img.dump folder to repack_ics.bat inside ImageSuite folder
12. When finished, reflash your A13 tablet
13. Done
NOTE: Test your touch screen first. Kung lumala yung problem, baliktad yung pagka-edit mo sa ctp_revert_x_flag and cto_revert_y_flag.


ImageSuite:
You can see links before reply
Ingat sa pag-edit, baka mabrick yung display. ;) Reflash nalang ulit pag ganun.

ScriptUnscript.7z
You can see links before reply

For MID-2330 single cam firmware, hanap nalang dito:
You can see links before reply
Sensya na yan lang maitutulong ko.. Madaming combination kasi ng MID-2330 eh.. Iba-iba components bawat batch ng manufacturing.

How to make your camera work (insmod guide, applies to other components as well):

List of additional possible camera drivers instead of gc0*.ko:
gt2005
hi253
hi704
mt9d112
mt9m112
mt9m113
ov2643
ov2655
ov5640
ov7670
sp0838

List of possible touchscreen drivers:
ft5x_38
ft5x_ts
goodix_touch
goodix811
gslx680
gt811
gt818_ts
gt828_ts
gt2005
mma7660
zt8031

List of possible G-sensor drivers:
dmard06
bma250
mxc622x

List of possible WiFi drivers:
bcm4330
8818eu
1. Enable ADB on tablet settings
2. Connect tablet to USB port, then open command prompt
3. Type adb devices to make sure your device is detected
4. If device is detected, type adb shell
5. Type cd /vendor/modules
6. Type ls
7. Take note of all the .ko files that you may need. List them down.
8. Type insmod <filename>.ko. Try them one by one until your camera/WiFi/G-sensor/touch screen works. If not, find the driver files on the internet (hassle work)
9. Pag gumana, take note of the camera driver that you loaded last. Install NovoTools then install CWM, use my previous posts
10. Reboot to recovery mode (CWM) using NovoTools.
11. Enter the following commands:
adb shell cat /dev/block/nandc > /sdcard/dump/boot.img
adb pull /sdcard/dump/boot.img c:/
12. Unpack boot.img in your C: using this guide: You can see links before reply
13. Open the init.sun5i.rc file using Notepad++
14. Add this line to the drivers section:
insmod /vendor/modules/<filename>.ko
15. Repack boot.img using the guide.
16. Enter adb push c:/boot.img /sdcard/ to the command prompt.
17. Enter adb shell cat /sdcard/boot.img > /dev/block/nandc

For those having a problem installing CWM, here are the instructions:
1. Place recovery.img on the internal SD card (/sdcard, not /extsd)
2. Install NovoTools 1.0, then open NovoTools
3. Press Flash Recovery. Wait until "Flash Recovery" notification appears
4. To enter CWM, press Boot to Recovery
NOTE: The MID-2330-S has no physical back button, so you'll have to reset the tablet each time. Hassle, I know.
recovery.img and NovoTools 1.0: You can see links before reply

MID-2330-S Rev1 ROM with fixed camera (working): You can see links before reply

Mounting external SD card to /sdcard instead of /extsd, so apps will be installed on the external SD card:
Full na yung internal memory? As in /sdcard sa Root Explorer? Default setting ng Android yan eh. Ang problem kasi pag nasa SD card yung apps, minsan nawawala sa App Drawer yung icon nya unless i-restart mo yung tablet. But if you really wanna do it..
1. Open a file manager with ROOT access
2. Go to /etc
3. Edit vold.fstab with a text editor
4. Change:
dev_mount sdcard /mnt/sdcard auto /devices/virtual/block/nand1
dev_mount extsd /mnt/extsd auto /devices/platform/sunxi-mmc.1/mm_host /devices/platform/sw_hcd_host0 /devices/platform/sw-ohci.1 /devices/plaform/sw-ohci.2
to:
dev_mount extsd /mnt/sdcard auto /devices/virtual/block/nand1
dev_mount sdcard /mnt/extsd auto /devices/platform/sunxi-mmc.1/mm_host /devices/platform/sw_hcd_host0 /devices/platform/sw-ohci.1 /devices/plaform/sw-ohci.2
NOTE: It may not be completely the same, so just find similar lines and switch extsd and sdcard.

Battery replacement for MID-2330/MID-2330-S 3.7V 1.5A
Larger 5000mAH battery, kaso ikaw pa mag-sosolder sa main board. Dalawang wire lang naman e. Black and red. Haha. You'll have to re-adjust speaker though, di kasi kasya pag di ginalaw yung speaker. 3.7V 1.5A dapat.
You can see links before reply

Q88 and Q8 firmware (para sa mga makukulit na off-topic :lol:)
You can see links before reply
Please ipagkalat nyo na din. Ang daming nagtatanong kahit sa PM. :lol:

Sprite error (isa pa to :lol:)
Gumamit ng LiveSuit kung ayaw ng PhoenixCard. Ganun lang kasimple. Further questions about this will not be entertained, so wag makulit. :P

Recalibrate your crappy touch screen (not 1 cm shifted touch screen issue)
You can see links before reply

Fix 1 cm shifted touch screen (I haven't tried this, YMMV)
You need a script.bin and script0.bin from a firmware with working touchscreen for this to work.
1. Turn on USB debugging on your tablet, then plug it into your PC's USB port.
2. Open a command prompt, then type adb shell.
3. Enter the following commands:

mkdir /sdcard/nanda
mount -t vfat /dev/block/nanda /sdcard/nanda
ls /sdcard/nanda
4. If this appeared:

boot.axf
boot.ini
drv_de.drv
font24.sft
font32.sft
linux
os_show
script.bin
script0.bin
sprite
sprite.axf
magic.bin
You have successfully mounted nanda, where script.bin and script0.bin are located. Back them up somewhere safe, then use the adb pull command to pull the files to your PC.
5. Drag them one at a time to unscript.bat (rename each before reconverting the other, as they will overwrite) to convert them to fex, then use Notepad++ to edit the files. Replace the [ctp_para] section of your ROM's bin files with the [ctp_para] of the ROM with the working touch screen.
6. Use script.exe to rescript them into bin files (don't forget to rename them back to script.bin and script0.bin) and use adb push to push them back to /sdcard/nanda
7. Reboot your tablet
Hopefully it works? :noidea::lol:

Non-working touchscreen fix:

1. Turn on USB debugging on your tablet, then plug it into your PC's USB port.
2. Open a command prompt, then type adb shell.
3. Enter the following commands:

mkdir /sdcard/nanda
mount -t vfat /dev/block/nanda /sdcard/nanda
ls /sdcard/nanda
4. If this appeared:

boot.axf
boot.ini
drv_de.drv
font24.sft
font32.sft
linux
os_show
script.bin
script0.bin
sprite
sprite.axf
magic.bin
You have successfully mounted nanda, where script.bin and script0.bin are located. Back them up somewhere safe, then use the adb pull command to pull the files to your PC.
5. Drag them one at a time to unscript.bat (rename each before reconverting the other, as they will overwrite) to convert them to fex, then use Notepad++ to edit the files.
6. Go to Find and Replace, enter on the "Find" text box P? then enter on the "Replace with" text box power, choose the "Down" option, then click Replace all.
7. Find the ctp_para section, then take note of this line:

ctp_name = "ft5x_ts"
That is the line that determines which touchscreen module to use. Replace the text inside the quotation marks with these (one at a time, until the touchscreen works):

ft5x_38
ft5x_ts
goodix_touch
goodix811
gslx680
gt811
gt818_ts
gt828_ts
gt2005
mma7660
zt8031
8. Don't forget to save the fex file.
6. Drag the fex file to script.exe to rescript them into bin files (don't forget to rename them back to script.bin and script0.bin) and use adb push to push them back to /sdcard/nanda
7. Reboot your tablet.

Hope it works. :lol:

Setting up ADB:

1. Download the Android SDK from the Google website and the ADB drivers (You can see links before reply).
2. Install the drivers and unzip the archive in C:/.
3. Right-click the Computer icon, then click Properties.
4. Click Advanced system settings, and on the Advanced tab, click Environmental Variables.
5. Under System variables, double-click Path on the list. At the end of the text line in Variable value, add a semicolon, then type the full path to the tools folder inside the SDK folder on C:/ (e.g. C:/android/tools)
6. Click OK thrice. ADB is now set up. :thumbsup:

nhel271
5th Mar 2013, 09:14
ask ko lng po mga boss bka meron po kayong firmware ng allwinner tech A13.... Q88 ang model ng tablet ko.... dual camera... halos same lng itsura nya sa tablet nyo... help namn po

vokz
5th Mar 2013, 14:13
sir pa help po update sprite error din po ung lumalabas skin.. model mid 2330-s.. :pray:

NikkoJames15
5th Mar 2013, 14:15
Guides updated, tignan nyo nalang. :lol:
You can see links before reply

nhel271
6th Mar 2013, 06:34
ask ko lng po mga boss, ok na po ung tablet ko, nflash ko na po kso hnd po gumagana ung touchscreen, ask ko lng kung pwd po bng gamitin ung fix inverted touchscreen? mraming salamat po....

NikkoJames15
6th Mar 2013, 12:59
ask ko lng po mga boss, ok na po ung tablet ko, nflash ko na po kso hnd po gumagana ung touchscreen, ask ko lng kung pwd po bng gamitin ung fix inverted touchscreen? mraming salamat po....

Nope, it's the insmod guide you need. :)
NOTE: insmod guide updated with list of all usual drivers.
You can see links before reply

nhel271
6th Mar 2013, 17:03
Nope, it's the insmod guide you need. :)
NOTE: insmod guide updated with list of all usual drivers.
You can see links before reply

nagpalit ako ng firmware ulit pumipindot ung touch nya kso pag pumindot ako sa baba sa taas ang pumipindot, ang ok lng ung sa gitna, anu po pwdng magandang gawin at anung mas madaling gawin ung hnd pumipindot o ung pumipindot pero iba ang nagseselect...help po boss

NikkoJames15
6th Mar 2013, 17:35
nagpalit ako ng firmware ulit pumipindot ung touch nya kso pag pumindot ako sa baba sa taas ang pumipindot, ang ok lng ung sa gitna, anu po pwdng magandang gawin at anung mas madaling gawin ung hnd pumipindot o ung pumipindot pero iba ang nagseselect...help po boss

Inverted touch screen guide, same post. Halos nandun lahat ng guides ko. Pag wala dun yung problem mo, may problems after ginawa mo yung steps, or may di ka magets, tsaka mo nalang itanong. Everything's getting repetitive, and I think wrote the guides clearly enough. :lol:

vokz
6th Mar 2013, 19:04
sir nikko, thanks sa help! khit hindi ko pa nattry ung ibang fw kc nasira ung mmc ko.... thnks ulet... more power!:clap:

NikkoJames15
6th Mar 2013, 19:57
sir nikko, thanks sa help! khit hindi ko pa nattry ung ibang fw kc nasira ung mmc ko.... thnks ulet... more power!:clap:

No problem. :)

iamjokerinland
6th Mar 2013, 20:00
wala po bang update para po sa jellybean ts? pwede ba tablet un iTab 7.0 po gamit ko

mhakmhak25
6th Mar 2013, 20:14
bakit po away gumana nung touch screen pagkatapos ng flash?

redwarriors25
6th Mar 2013, 20:57
bakit ganun TS sprite error lumalabas sakin upon ginawa ko ung instruction

You can see links before reply

huckleberrypie
6th Mar 2013, 21:04
Hit-and-miss ang PhoenixCard. Mag Livesuit ka na lang, as it's much more effective. Either that or maling image yung linagay mo.

redwarriors25
6th Mar 2013, 21:23
san nakaka kuha ng live suite sir

NikkoJames15
7th Mar 2013, 00:56
bakit po away gumana nung touch screen pagkatapos ng flash?
Check insmod guide for non-working components. :)
You can see links before reply


wala po bang update para po sa jellybean ts? pwede ba tablet un iTab 7.0 po gamit ko
I have a Jellybean ROM, but it's not yet ready. Anyway, I doubt it will work on your iTab (unless we're really lucky :lol:) since we have different tablets and I don't know what modules your tablet needs.


bakit ganun TS sprite error lumalabas sakin upon ginawa ko ung instruction

You can see links before reply
What huckleberrypie said. :lol:


san nakaka kuha ng live suite sir
Here: You can see links before reply :thumbsup: Good luck sa pag-flash. :)

mhakmhak25
7th Mar 2013, 10:20
Nope, it's the insmod guide you need. :)
NOTE: insmod guide updated with list of all usual drivers.
You can see links before reply

boss nung gamit mong firmware?

NikkoJames15
7th Mar 2013, 13:30
boss nung gamit mong firmware?

ICS: Modified Rev1 Firmware 4.0.4 MID-2330-S, see the guide, may link doon.

Jellybean: FaaastJB by Toxicro 4.1.1 custom ROM, with gslx680 and mcx622x patch, based on Ainol Novo Legend firmware. No working camera (again :rant:), will post pag working na. Might take a while though.

putalittlemore, where art thou? Help? :lol:

nhel271
7th Mar 2013, 14:42
Fix for inverted capacitive touch screen:
1. Extract ROM using ImageSuite (extract_img.bat)
2. Inside image.img.dump folder, open COMMON _SYS_CONFIG100000 using Notepad++
3. Find ctp_para, edit ctp_revert_x_flag or ctp_revert_y_flag, 1 or 0 lang yung value, x for horizontal inverted, y for vertical inverted, both for completely inverted
4. Open MagicISO, then open RFSFAT16_BOOTLOADER_00000
5. Copy script.bin and script0.bin to any convenient folder
6. Using unscript.bat or bin2fex, edit ctp_revert_x_flag and cto_revert_y_flag on script.bin (unscript.bat and bin2fex will create a file called sys_config1.fex, this is what you will edit)
7. Using script.exe or fex2bin, convert sys_config1.fex to ]sys_config1.bin, and rename to script.bin.
NOTE: If any error is encountered, look for the correct values in COMMON _SYS_CONFIG10000
8. Repeat steps 6 and 7 for script0.bin (same NOTE applies)
9. Replace files in RFSFAT16_BOOTLOADER_00000 with edited ones
10. Save the image
11. Drag image.img.dump folder to repack_ics.bat inside ImageSuite folder
12. When finished, reflash your A13 tablet
13. Done
NOTE: Test your touch screen first. Kung lumala yung problem, baliktad yung pagka-edit mo sa ctp_revert_x_flag and cto_revert_y_flag.

boss hnd ko po masyado magets ung instruction, panu ko po ba gagawin at uumpisahan ito? nakasaksak ba dapat ung tablet..? kailangan ko bng edit ung fw na dinownload ko..? ayw kc magbukas ung EXTRACT_iMG

NikkoJames15
7th Mar 2013, 16:41
Fix for inverted capacitive touch screen:
1. Extract ROM using ImageSuite (extract_img.bat)
2. Inside image.img.dump folder, open COMMON _SYS_CONFIG100000 using Notepad++
3. Find ctp_para, edit ctp_revert_x_flag or ctp_revert_y_flag, 1 or 0 lang yung value, x for horizontal inverted, y for vertical inverted, both for completely inverted
4. Open MagicISO, then open RFSFAT16_BOOTLOADER_00000
5. Copy script.bin and script0.bin to any convenient folder
6. Using unscript.bat or bin2fex, edit ctp_revert_x_flag and cto_revert_y_flag on script.bin (unscript.bat and bin2fex will create a file called sys_config1.fex, this is what you will edit)
7. Using script.exe or fex2bin, convert sys_config1.fex to ]sys_config1.bin, and rename to script.bin.
NOTE: If any error is encountered, look for the correct values in COMMON _SYS_CONFIG10000
8. Repeat steps 6 and 7 for script0.bin (same NOTE applies)
9. Replace files in RFSFAT16_BOOTLOADER_00000 with edited ones
10. Save the image
11. Drag image.img.dump folder to repack_ics.bat inside ImageSuite folder
12. When finished, reflash your A13 tablet
13. Done
NOTE: Test your touch screen first. Kung lumala yung problem, baliktad yung pagka-edit mo sa ctp_revert_x_flag and cto_revert_y_flag.

boss hnd ko po masyado magets ung instruction, panu ko po ba gagawin at uumpisahan ito? nakasaksak ba dapat ung tablet..? kailangan ko bng edit ung fw na dinownload ko..? ayw kc magbukas ung EXTRACT_iMG

Yung dinownload mo na firmware .img file, drag mo sa extract_img.bat. Take note, Notepad++, not Windows Notepad. :) You only need to plug the tablet in to your PC at step 12.

NikkoJames15
8th Mar 2013, 04:01
I got Toxicro's Jellybean 4.1.1 ROM working with my MID-2330-S Rev1, but no camera whatsoever. Hmm. Gotta try harder, this could be it. Loving Jellybean BTW. :lol:
I won't be uploading it yet, baka kasi may mag-flash na kaagad. Di pa tapos e. :lol:

nhel271
8th Mar 2013, 11:32
You can see links before reply (You can see links before reply)

ito po ung itsura ng tablet ko boss, bka may saktong fw ka po...? huhuhu hirap po kc akong edit ung inverted touch nya boss... huhuhuh, pls help naman boss....

ito po ung ginamit kung firmware na inverted...
You can see links before reply

NikkoJames15
8th Mar 2013, 12:11
You can see links before reply (You can see links before reply)

ito po ung itsura ng tablet ko boss, bka may saktong fw ka po...? huhuhu hirap po kc akong edit ung inverted touch nya boss... huhuhuh, pls help naman boss....

ito po ung ginamit kung firmware na inverted...
You can see links before reply

Like I said, use the inverted touchscreen fix in the guide.. Alin ba doon sa guide yung di mo naintindihan..? The thing is, if I gave you a working edited ROM, then everybody's going to be asking for one since pinagbigyan kita. :sigh: With all those A13 tablets, sakit sa ulo yun. :lol:

vokz
8th Mar 2013, 13:59
sir nikko, bkit ayaw po gumana ng livesuit sa pc ko?xp sp3 OS ko.. (install the driver fail, the program will exit) yan po lumalabas pag click ko ng livesuit... pa help po plss...:weep:

nhel271
8th Mar 2013, 14:42
Like I said, use the inverted touchscreen fix in the guide.. Alin ba doon sa guide yung di mo naintindihan..? The thing is, if I gave you a working edited ROM, then everybody's going to be asking for one since pinagbigyan kita. :sigh: With all those A13 tablets, sakit sa ulo yun. :lol:

pagbigyan u naman ako boss, huhuhu pls:praise: sakit na ng ulo ko eh :upset: pls.pls.pls. :pray: :weep:

NikkoJames15
8th Mar 2013, 15:36
pagbigyan u naman ako boss, huhuhu pls:praise: sakit na ng ulo ko eh :upset: pls.pls.pls. :pray: :weep:

Anu bang di mo gets? Post mo nalang. Step by step kitang tulungan mamaya kauwi ko para matutunan mo din? Okay? :lol:

NikkoJames15
8th Mar 2013, 15:41
sir nikko, bkit ayaw po gumana ng livesuit sa pc ko?xp sp3 OS ko.. (install the driver fail, the program will exit) yan po lumalabas pag click ko ng livesuit... pa help po plss...:weep:

Run as Admin. Try mo. :) 64-bit ba yan?

nhel271
8th Mar 2013, 16:30
ito na po sya sir.....


You can see links before reply (You can see links before reply)

You can see links before reply (You can see links before reply)

You can see links before reply (You can see links before reply)

You can see links before reply (You can see links before reply)

part 6 hnd ko na po maintindihan, hnd ko alam ung script.exe...

6. Using unscript.bat or bin2fex, edit ctp_revert_x_flag and cto_revert_y_flag on script.bin (unscript.bat and bin2fex will create a file called sys_config1.fex, this is what you will edit)
7. Using script.exe or fex2bin, convert sys_config1.fex to ]sys_config1.bin, and rename to script.bin.
NOTE: If any error is encountered, look for the correct values in COMMON _SYS_CONFIG10000
8. Repeat steps 6 and 7 for script0.bin (same NOTE applies)
9. Replace files in RFSFAT16_BOOTLOADER_00000 with edited ones
10. Save the image
11. Drag image.img.dump folder to repack_ics.bat inside ImageSuite folder
12. When finished, reflash your A13 tablet
13. Done


huhuhuh, help po boss pls :weep:

redwarriors25
8th Mar 2013, 18:55
anu po ba tamang firmware ung sa tablet ko na pink pa help naman po salamat

NikkoJames15
8th Mar 2013, 20:02
ito na po sya sir.....


You can see links before reply (You can see links before reply)

You can see links before reply (You can see links before reply)

You can see links before reply (You can see links before reply)

You can see links before reply (You can see links before reply)

part 6 hnd ko na po maintindihan, hnd ko alam ung script.exe...

6. Using unscript.bat or bin2fex, edit ctp_revert_x_flag and cto_revert_y_flag on script.bin (unscript.bat and bin2fex will create a file called sys_config1.fex, this is what you will edit)
7. Using script.exe or fex2bin, convert sys_config1.fex to ]sys_config1.bin, and rename to script.bin.
NOTE: If any error is encountered, look for the correct values in COMMON _SYS_CONFIG10000
8. Repeat steps 6 and 7 for script0.bin (same NOTE applies)
9. Replace files in RFSFAT16_BOOTLOADER_00000 with edited ones
10. Save the image
11. Drag image.img.dump folder to repack_ics.bat inside ImageSuite folder
12. When finished, reflash your A13 tablet
13. Done


huhuhuh, help po boss pls :weep:

Sa Find ng Notepad++, hanapin mo yung ctp_revert_x_flag at ctp_revert_y_flag sa COMMON _SYS_CONFIG10000 and sys_config1.fex, then palitan mo yung value, kung 1 gawin mong 0, and vice versa.
Just to be sure, Find and Replace mo lahat ng P?, gawin mong power lahat.
Yung script.exe pala andito: <link (You can see links before reply)>, wala sa ImageSuite. Sorry.. :lol: Fail. :slap:


anu po ba tamang firmware ung sa tablet ko na pink pa help naman po salamat

Really? Di ko alam anung model nyan so kahit alam kong pink, I can't help. :lol:

mhakmhak25
8th Mar 2013, 20:37
boss bakit wla pong scipt.exe sa image suit?

mhakmhak25
8th Mar 2013, 20:42
script.exe pala haha:lol:

NikkoJames15
8th Mar 2013, 23:27
Post updated with link. Wala pala sa ImageSuite, at di ko pa napost yung link. :slap: Sorry. :lol:
You can see links before reply

nhel271
9th Mar 2013, 09:37
Post updated with link. Wala pala sa ImageSuite, at di ko pa napost yung link. :slap: Sorry. :lol:
You can see links before reply

maraming salamat po boss, hayaan mo boss, super salamat sna magawa ko na ung tablet ko

mhakmhak25
9th Mar 2013, 10:11
haha:lol: salamat boss

elvinabella
9th Mar 2013, 11:03
oo-nga-bait-niTS....thanks-po

NikkoJames15
9th Mar 2013, 14:03
Guide updated again, with link to unscript.bat and script.exe. :lol: Alternative to bin2fex and fex2bin. Also edited some guides to make them easier to understand.
You can see links before reply

vokz
9th Mar 2013, 16:39
boss sir nikko,
tnx sa fw gumana na kaya lang hindi ko pa naayos ung inverted screnn.. maraming salamat boss!!!:yipee:

vokz
9th Mar 2013, 17:45
sir nikko, pasensya na po hindi ko po kc magets ung guide nung sa inverted touchscreen, hindi po kc ako ganun karunong sa computer,, pa help po pls...:pray: pasensya na po...

NikkoJames15
9th Mar 2013, 20:37
Alin doon? :lol: post the step you don't get..

mike061582
10th Mar 2013, 07:04
bos pano ba ung gagawin pag hindi makalog in sa google play store kaka flash q lang ng 4.0.4AllWorkingBasedOnRev1 kaya lang hindi gumagana ung account and sync blang ko cia e patulong naman thanks

mike061582
10th Mar 2013, 07:13
tsaka bos patulong din dito
Mounting external SD card to /sdcard instead of /extsd, so apps will be installed on the external SD card:
Full na yung internal memory? As in /sdcard sa Root Explorer? Default setting ng Android yan eh. Ang problem kasi pag nasa SD card yung apps, minsan nawawala sa App Drawer yung icon nya unless i-restart mo yung tablet. But if you really wanna do it..
1. Open a file manager with ROOT access
2. Go to /etc
3. Edit vold.fstab with a text editor
4. Change:
dev_mount sdcard /mnt/sdcard auto /devices/virtual/block/nand1
dev_mount extsd /mnt/extsd auto /devices/platform/sunxi-mmc.1/mm_host /devices/platform/sw_hcd_host0 /devices/platform/sw-ohci.1 /devices/plaform/sw-ohci.2
to:
dev_mount extsd /mnt/sdcard auto /devices/virtual/block/nand1
dev_mount sdcard /mnt/extsd auto /devices/platform/sunxi-mmc.1/mm_host /devices/platform/sw_hcd_host0 /devices/platform/sw-ohci.1 /devices/plaform/sw-ohci.2
NOTE: It may not be completely the same, so just find similar lines and switch extsd and sdcard.

pano iedit na edit q na sia probleme lang e hindi q ma save failde lagi e kahit e delete q ung file tas palitan q ng isang file ung edited na e nag pefaild sa pag paste e. thanks

hyper0517
10th Mar 2013, 08:11
pede po ba ito sa MID MV90 na model?

vokz
10th Mar 2013, 10:36
Alin doon? :lol: post the step you don't get..

ung guide nyo po sa "FIX for inverted capative touch screen" d ko magets eh... nag download na ko ng "imagesuit" and "scriptunscript" pero d ko magawa...:slap: sensya na:help:... ung download ko na imagesuite eto po ung size 232kb tapos ung scripunscript eto po ung size nya 3.47mb, tma ba ung download ko... pa help plss boss..:pray:

NikkoJames15
10th Mar 2013, 18:20
tsaka bos patulong din dito
Mounting external SD card to /sdcard instead of /extsd, so apps will be installed on the external SD card:
Full na yung internal memory? As in /sdcard sa Root Explorer? Default setting ng Android yan eh. Ang problem kasi pag nasa SD card yung apps, minsan nawawala sa App Drawer yung icon nya unless i-restart mo yung tablet. But if you really wanna do it..
1. Open a file manager with ROOT access
2. Go to /etc
3. Edit vold.fstab with a text editor
4. Change:
dev_mount sdcard /mnt/sdcard auto /devices/virtual/block/nand1
dev_mount extsd /mnt/extsd auto /devices/platform/sunxi-mmc.1/mm_host /devices/platform/sw_hcd_host0 /devices/platform/sw-ohci.1 /devices/plaform/sw-ohci.2
to:
dev_mount extsd /mnt/sdcard auto /devices/virtual/block/nand1
dev_mount sdcard /mnt/extsd auto /devices/platform/sunxi-mmc.1/mm_host /devices/platform/sw_hcd_host0 /devices/platform/sw-ohci.1 /devices/plaform/sw-ohci.2
NOTE: It may not be completely the same, so just find similar lines and switch extsd and sdcard.

pano iedit na edit q na sia probleme lang e hindi q ma save failde lagi e kahit e delete q ung file tas palitan q ng isang file ung edited na e nag pefaild sa pag paste e. thanks
Edit mo using adb, open Command Prompt, type

adb pull /etc/vold.fstab C:/
Open mo sya using Notepad++ sa C:/ then save. After mo i-edit, type mo sa Command Prompt

adb push C:/vold.fstab /etc/vold.fstab


pede po ba ito sa MID MV90 na model?
Doubt it.. :sigh:


ung guide nyo po sa "FIX for inverted capative touch screen" d ko magets eh... nag download na ko ng "imagesuit" and "scriptunscript" pero d ko magawa...:slap: sensya na:help:... ung download ko na imagesuite eto po ung size 232kb tapos ung scripunscript eto po ung size nya 3.47mb, tma ba ung download ko... pa help plss boss..:pray:
Yep tama yung dinownload mo.. Unzip mo lang using 7zip.. :lol: Makikita mo lahat dun yung kelangan mo sa guide. Yung Notepad++ i-Google mo nalang. Nasa SourceForge lang yun. Irerewrite ko nalang yung buong guide.. :lol:

1. Download ImageSuite.7z, ScriptUnscript.7z, Install Notepad++ (notepad-plus-plus.org/), MagicISO and 7Zip kung wala ka pa nun.
2. Kunin mo yung img file nung ROM, tapos i-move mo sa folder ng ImageSuite na inextract mo. Drag mo yung img file sa extract_img.bat, then find a drink or something.. Kasi medyo matagal. :lol:
3. Pag natapos, may lilitaw na folder pangalan image.img.dump. Andoon yung files na kelangan mo i-edit, COMMON _SYS_CONFIG100000 tsaka RFSFAT16_BOOTLOADER_00000.
4. Right-click mo yung COMMON _SYS_CONFIG100000 tapos click Edit using Notepad++.
5. CTRL+F (Find) ctp_revert_x_flag, tapos palitan mo yung value nya. Kung 0 gawin mong 1, kung 1 gawin mong 0.
NOTE: Edit this kung inverted yung left and right touch response.
6. Nasa baba ng ctp_revert_x_flag yung ctp_revert_y_flag. Ganun din yung gagawin mo.
NOTE: Edit this kung inverted yung up and down touch response.
NOTE: Edit both kung inverted pareho. I'm sure you get that already, pero malay mo may magtanong. :lol:
7. Save mo na yung COMMON _SYS_CONFIG100000.
8. Open mo yung MagicISO, click Open, then set Files of type to All Files (*.*).
9. Punta ka dun sa image.img.dump folder, tapos open mo yung RFSFAT16_BOOTLOADER_00000 na file. It's like an ISO file, you can replace the files inside.
10. Sa MagicISO, hanapin mo doon sa RFSFAT16_BOOTLOADER_00000 yung files na script.bin at script0.bin. Copy mo yun doon sa folder kung saan mo inextract yung ScriptUnscript.7z. Don't close MagicISO yet.
11. Drag mo yung script.bin sa unscript.bat. (make sure that they are all at the same folder)
12. May lilitaw na file na system_config1.fex. Edit mo to using Notepad++.
13. Repeat steps 5 and 6.
14. CTRL+H (Find and Replace), type mo dun sa Find what: P? tapos sa Replace with: power
15. Save system_config1.fex, drag it to Script.exe. May lilitaw na file na system_config1.bin. Rename mo yun to script.bin tapos ibalik mo sa RFSFAT16_BOOTLOADER_00000 via MagicISO.
16. Repeat steps 11 to 15 for script0.bin.
17. Save mo na yung RFSFAT16_BOOTLOADER_00000 sa MagicISO.
18. Balik ka sa folder ng ImageSuite, tapos idrag mo yung image.img.dump folder sa rebuild_ics.bat.
19. Get more drinks, or baka gusto mo nang mag-snack, kasi matagal din to. :lol:
20. Reflash, cross your fingers, and hope it works. :thumbsup:

Irereplace ko yung Inverted TS Guide with this one, since less technical yung version na to.. :thumbsup:

mhakmhak25
10th Mar 2013, 22:03
12. May lilitaw na file na system_config1.fex. Edit mo to using Notepad++
wla pong laman ung file na system_config1.fex,,,, anu po yung ilalagay dun? hndi ko pa din magets kasi eh,, salamat

markpsycho
11th Mar 2013, 03:38
sir pano po eto?? steps number 15 subkey error: subkey type is gpio but group is invalid on line 240 colume 19

NikkoJames15
11th Mar 2013, 05:00
12. May lilitaw na file na system_config1.fex. Edit mo to using Notepad++
wla pong laman ung file na system_config1.fex,,,, anu po yung ilalagay dun? hndi ko pa din magets kasi eh,, salamat

11. Drag mo yung script.bin sa unscript.bat. (make sure that they are all at the same folder)


sir pano po eto?? steps number 15 subkey error: subkey type is gpio but group is invalid on line 240 colume 19

14. CTRL+H (Find and Replace), type mo dun sa Find what: P? tapos sa Replace with: power Make sure napalitan lahat. Balik ka sa first line (CTRL+Home) para sigurado, or gamitin mo yung Up and Down options sa Find and Replace. :lol:

mhakmhak25
11th Mar 2013, 09:03
boss yung lumbas na system_config1.fex anu po yung ilalagay dun?

mike061582
11th Mar 2013, 09:10
bos thanks naayos q na ung share mid 2330-s q tas na root q nadin po tas ginamitan q nalang ng mga tweak tulad ng V6_SuperCharger_for_Android-Update9_RC9.sh at KickAssKernelizer_Tweaks_Installer_Update_3_RC11_T est_1.sh
gumamit lng q ng script manager at busybox

mhakmhak25
11th Mar 2013, 11:28
boss windows xp gamit ko, pag dinadrag ko yung folder na image.img.dump sa repack_ics.bat wla pong nangyayari eh:weep::weep::weep: help naman po:help::pray:

NikkoJames15
11th Mar 2013, 12:25
boss windows xp gamit ko, pag dinadrag ko yung folder na image.img.dump sa repack_ics.bat wla pong nangyayari eh:weep::weep::weep: help naman po:help::pray:

May lilitaw dapat na ganito. Pag walang lumitaw na ganyan ewan ko nalang. Redownload ka siguro ng ImageSuite sa ibang link.. :noidea: Make sure din na administrator ka sa XP..

Yung sa system_config1.fex, please make sure that the script.bin/script0.bin file is INSIDE the ScriptUnscript folder before dragging. :lol:

mhakmhak25
11th Mar 2013, 14:46
naka-admin na po ako eh pero ayaw pa din:weep:
installan ko nlang ng ibang os yung pc ko para gumana:noidea:
anyway thank you sir :)

vokz
11th Mar 2013, 19:59
Yep tama yung dinownload mo.. Unzip mo lang using 7zip.. :lol: Makikita mo lahat dun yung kelangan mo sa guide. Yung Notepad++ i-Google mo nalang. Nasa SourceForge lang yun. Irerewrite ko nalang yung buong guide.. :lol:

1. Download ImageSuite.7z, ScriptUnscript.7z, Install Notepad++ (notepad-plus-plus.org/), MagicISO and 7Zip kung wala ka pa nun.
2. Kunin mo yung img file nung ROM, tapos i-move mo sa folder ng ImageSuite na inextract mo. Drag mo yung img file sa extract_img.bat, then find a drink or something.. Kasi medyo matagal. :lol:
3. Pag natapos, may lilitaw na folder pangalan image.img.dump. Andoon yung files na kelangan mo i-edit, COMMON _SYS_CONFIG100000 tsaka RFSFAT16_BOOTLOADER_00000.
4. Right-click mo yung COMMON _SYS_CONFIG100000 tapos click Edit using Notepad++.
5. CTRL+F (Find) ctp_revert_x_flag, tapos palitan mo yung value nya. Kung 0 gawin mong 1, kung 1 gawin mong 0.
NOTE: Edit this kung inverted yung left and right touch response.
6. Nasa baba ng ctp_revert_x_flag yung ctp_revert_y_flag. Ganun din yung gagawin mo.
NOTE: Edit this kung inverted yung up and down touch response.
NOTE: Edit both kung inverted pareho. I'm sure you get that already, pero malay mo may magtanong. :lol:
7. Save mo na yung COMMON _SYS_CONFIG100000.
8. Open mo yung MagicISO, click Open, then set Files of type to All Files (*.*).
9. Punta ka dun sa image.img.dump folder, tapos open mo yung RFSFAT16_BOOTLOADER_00000 na file. It's like an ISO file, you can replace the files inside.
10. Sa MagicISO, hanapin mo doon sa RFSFAT16_BOOTLOADER_00000 yung files na script.bin at script0.bin. Copy mo yun doon sa folder kung saan mo inextract yung ScriptUnscript.7z. Don't close MagicISO yet.
11. Drag mo yung script.bin sa unscript.bat. (make sure that they are all at the same folder)
12. May lilitaw na file na system_config1.fex. Edit mo to using Notepad++.
13. Repeat steps 5 and 6.
14. CTRL+H (Find and Replace), type mo dun sa Find what: P? tapos sa Replace with: power
15. Save system_config1.fex, drag it to Script.exe. May lilitaw na file na system_config1.bin. Rename mo yun to script.bin tapos ibalik mo sa RFSFAT16_BOOTLOADER_00000 via MagicISO.
16. Repeat steps 11 to 15 for script0.bin.
17. Save mo na yung RFSFAT16_BOOTLOADER_00000 sa MagicISO.
18. Balik ka sa folder ng ImageSuite, tapos idrag mo yung image.img.dump folder sa rebuild_ics.bat.
19. Get more drinks, or baka gusto mo nang mag-snack, kasi matagal din to. :lol:
20. Reflash, cross your fingers, and hope it works. :thumbsup:

Irereplace ko yung Inverted TS Guide with this one, since less technical yung version na to.. :thumbsup:[/QUOTE]

thank you po sir nikko, try ko po ngaun to.. kakauwi ko lang ksi galing work... :salute:

NikkoJames15
13th Mar 2013, 01:30
I might not be online for a few days.. Iwan nyo nalang yung questions nyo, kung meron man. :lol: I'll answer them as soon as I get back online (swerte pag may WiFi sa pupuntahan namin) :lol:

alexa101008
13th Mar 2013, 21:24
sir nikko, bakit ayaw pong ma-open ng rom, pagkatapos kong i-download? salamat po..... :help:

NikkoJames15
13th Mar 2013, 23:30
You don't "open" a ROM.. You flash it to the tablet using LiveSuit.. Most likely problem mo is extracting it, gamit ka ng 7Zip. If you want to take it apart, use ImageSuite. You can't just "open" it by double-clicking.

keitaro92
14th Mar 2013, 01:23
Hey Bros!
BUENOS DIAS!

I just wanna ask if this MID-2330 thing has no back camera (hardware) it's like the picture posted in the first page? 'coz my friend was askin me to repair her haipad, she lost the manuals and everything related to the model as well as other stuffs.


thank you in advance to someone who can help me with this.

NikkoJames15
14th Mar 2013, 03:52
Hey Bros!
BUENOS DIAS!

I just wanna ask if this MID-2330 thing has no back camera (hardware) it's like the picture posted in the first page? 'coz my friend was askin me to repair her haipad, she lost the manuals and everything related to the model as well as other stuffs.


thank you in advance to someone who can help me with this.

Yep, no back camera for the MID-2330. It's the Haipad A13, I think. :lol: The one that we were messing with recently is the dual-cam version, the MID-2330-S. The ROMs might work, but there's no 100% guarantee it will work 100% even if it boots fine. There might be inoperable components such as the touch screen, gravity sensor and the camera. IMO the camera is the most annoying to fix. :ranting::lol:

keitaro92
14th Mar 2013, 06:05
Yep, no back camera for the MID-2330. It's the Haipad A13, I think. :lol: The one that we were messing with recently is the dual-cam version, the MID-2330-S. The ROMs might work, but there's no 100% guarantee it will work 100% even if it boots fine. There might be inoperable components such as the touch screen, gravity sensor and the camera. IMO the camera is the most annoying to fix. :ranting::lol:

Thank you mate!

one thing more, im addled with so many firmwares out there like here You can see links before reply/a13-ab-downloads/4570792769 ...which of these firmwares listed is the most possible cure to her haipad?

:salute::dance::dance::dance::salute:

spyware
14th Mar 2013, 10:17
mga sir, paano po ba e hard reset yung share na tablet pc ng friend ko, stuck lang kasi siya sa android logo at ayaw ng mag tuloy2x..

at saka iwan ko lang kung anung brand o version ito wala namang naka lagay sa likod, basta meron lang siyang nakalagay na share sa boot logo pag ion..

alexa101008
14th Mar 2013, 11:14
Yep tama yung dinownload mo.. Unzip mo lang using 7zip.. :lol: Makikita mo lahat dun yung kelangan mo sa guide. Yung Notepad++ i-Google mo nalang. Nasa SourceForge lang yun. Irerewrite ko nalang yung buong guide.. :lol:

1. Download ImageSuite.7z, ScriptUnscript.7z, Install Notepad++ (notepad-plus-plus.org/), MagicISO and 7Zip kung wala ka pa nun.
2. Kunin mo yung img file nung ROM, tapos i-move mo sa folder ng ImageSuite na inextract mo. Drag mo yung img file sa extract_img.bat, then find a drink or something.. Kasi medyo matagal. :lol:
3. Pag natapos, may lilitaw na folder pangalan image.img.dump. Andoon yung files na kelangan mo i-edit, COMMON _SYS_CONFIG100000 tsaka RFSFAT16_BOOTLOADER_00000.
4. Right-click mo yung COMMON _SYS_CONFIG100000 tapos click Edit using Notepad++.
5. CTRL+F (Find) ctp_revert_x_flag, tapos palitan mo yung value nya. Kung 0 gawin mong 1, kung 1 gawin mong 0.
NOTE: Edit this kung inverted yung left and right touch response.
6. Nasa baba ng ctp_revert_x_flag yung ctp_revert_y_flag. Ganun din yung gagawin mo.
NOTE: Edit this kung inverted yung up and down touch response.
NOTE: Edit both kung inverted pareho. I'm sure you get that already, pero malay mo may magtanong. :lol:
7. Save mo na yung COMMON _SYS_CONFIG100000.
8. Open mo yung MagicISO, click Open, then set Files of type to All Files (*.*).
9. Punta ka dun sa image.img.dump folder, tapos open mo yung RFSFAT16_BOOTLOADER_00000 na file. It's like an ISO file, you can replace the files inside.
10. Sa MagicISO, hanapin mo doon sa RFSFAT16_BOOTLOADER_00000 yung files na script.bin at script0.bin. Copy mo yun doon sa folder kung saan mo inextract yung ScriptUnscript.7z. Don't close MagicISO yet.
11. Drag mo yung script.bin sa unscript.bat. (make sure that they are all at the same folder)
12. May lilitaw na file na system_config1.fex. Edit mo to using Notepad++.
13. Repeat steps 5 and 6.
14. CTRL+H (Find and Replace), type mo dun sa Find what: P? tapos sa Replace with: power
15. Save system_config1.fex, drag it to Script.exe. May lilitaw na file na system_config1.bin. Rename mo yun to script.bin tapos ibalik mo sa RFSFAT16_BOOTLOADER_00000 via MagicISO.
16. Repeat steps 11 to 15 for script0.bin.
17. Save mo na yung RFSFAT16_BOOTLOADER_00000 sa MagicISO.
18. Balik ka sa folder ng ImageSuite, tapos idrag mo yung image.img.dump folder sa rebuild_ics.bat.
19. Get more drinks, or baka gusto mo nang mag-snack, kasi matagal din to. :lol:
20. Reflash, cross your fingers, and hope it works. :thumbsup:

Irereplace ko yung Inverted TS Guide with this one, since less technical yung version na to.. :thumbsup:

sir, ayaw pong gumana sakin... inverted parin yung TS ko... pls. help:pray::pray::pray::pray: nagawa ko naman po ng maayos...

spyware
14th Mar 2013, 11:39
You can see links before reply

Ito po ang nahanap kong solusyon para sa
naging problema ng Tablet PC ko na

SHARE MID-2330 ANDROID 4.0 TABLET PC.


UNANG PROBLEMA:
Nakalimutan ang password, kaya na lock ang tablet.
Hindi na magagamit, hindi kasi naka register sa Google Account.

UNANG SOLUSYON:
Gumamit ng Phoenix USBPro
Gumamit ng LiveSuit

UNANG RESULTA:
Nag hang ang TabletPC sa Android Logo. = ERROR

ANG DAHILAN:
Maling Firmware o/at ibang bersyon ng Phoenix/Livesuit ang nagamit.




PANGALAWANG PROBLEMA:
Naka hang ang TabletPC sa Android Logo.

PANGALAWANG SOLUSYON:
Gumamit ng Phoenix Card

PANGALAWANG RESULTA:
Ayaw na mag boot ng TabletPC kapag walang Memory Card.
At kapag nakalagay ang Memory Card, naka hang lang sya sa RED RECTANGLE. = ERROR

ANG DAHILAN:
Maling Firmware o/at ibang bersyon ng Phoenix Card ang nagamit.



SOLUSYON

Gumamit ng PhoenixCard, dahil ito pa lamang ang tanging paraan
para mag boot ulit ang TabletPC galing sa RED RECTANGLE ERROR.
Ito rin para sa akin ang pinaka madali at pinaka safe na paraan
sa pag Re-Flash/Upgrade ng Firmware ng A13 TabletPC.


MGA KAILANGAN

Subok na gumaganang PhoenixCard
Tamang Firmware para sa SHARE MID-2330 ANDROID 4.0 TABLET PC
Micro SD Card (Kahit 512MB lang pwede na, dahil 300MB lang kailangan)
Windows Operating System (XP, Vista, 7, 8 - 32bit o 64bit)


KUNIN DITO ANG MGA KAILANGAN

PHOENIX CARD (You can see links before reply)
FIRMWARES
Subukan ang bawat isang Firmware.
Tatlo pa lamang ang nasusubukan ko
at lahat ng tatlong iyon ay walang G-Sensor driver.

Firmware 1 (You can see links before reply) - Nasubukan ko na
Firmware 2 (You can see links before reply) - Nasubukan ko na
Firmware 3 (You can see links before reply) - Nasubukan ko na (PASSWORD: tabletpc)
Firmware 4 (You can see links before reply) (PASSWORD: tabletpc)
Firmware 5 (You can see links before reply) (PASSWORD: tabletpc)
Firmware 6 (You can see links before reply) (PASSWORD: tabletpc)
Firmware 7 (You can see links before reply) - UPDATE(1/23/13) - HINDI DAW PO NAGAN ANG TOUCHCREEN NG FIRMWARE #7


PAMAMARAAN


* Siguraduhing walang external storage na naka-plug sa CPU
* Kapag Windows Vista, 7 o 8 ang gamit mo, i set sa
Windows XP SP2 ang Phoenix Card at i-tick ang Run this program as an Administrator.
* Ikabit ang memory card sa CPU at i-format sa FAT32 gamit ang Windows
* Alisin ang memory card sa CPU at ikabit ulit makalipas ang ilang segundo
* I-run ang Phoenix Card
* Piliin ang tamang Drive Letter ng memory card
* I-click ang Img File button at piliin ang firmware na iyong na-i-download
* I-tick ang Product sa Write Mode frame
* I-click ang Burn button
* Antaying matapos ang proseso. Medyo may katagalan ito.
* Kapag tapos na, pansinin na lumiit ang size ng memory card nyo
* Pansinin din na walang laman ang memory card na akala mo ay walang nangyari
* Huwag mag alala, dahil nasa ibang partisyon ang mga files at hindi mo ito makikita
* Alisin ang memory card at ikabit sa OFF na SHARE MID 2330
* Buksan ang Tablet sa natural na paraan. Walang ibang dapat na pindutin pa.
* Makikita ang pag labas ng pulang rectangle at ang pag usad ng progress bar
* Mamatay ang tablet sa oras na mapuno ang progress bar
* Alisin muna ang memory card bago ito buksan ulit
* Antayin matapos ang tablet, medyo may katagalan.
* Tapos na.
* Mag install ng games gaya ng Temple Run upang malaman kung may G-Sensor.
* Gumamit ng ibang firmware hanggang sa maaayos
at paki share po dito ang may G-Sensor na Firmware.
* Salamat po.



:thumbsup::thumbsup::thumbsup::thumbsup: maraming salamat ditosa tut. mo sir.. at sa wakas na ayos ko na yung share tablet pc ko model A-13 MID,,



Maraming salamat talaga sir..:salute:

alexa101008
14th Mar 2013, 11:42
You don't "open" a ROM.. You flash it to the tablet using LiveSuit.. Most likely problem mo is extracting it, gamit ka ng 7Zip. If you want to take it apart, use ImageSuite. You can't just "open" it by double-clicking.

sir kahit gamitan ko po ng 7zip. ayaw parin error po... tapos pag flash po sa tablet ayaw din po? pls.. help po...:pray::pray::pray::pray::pray::pray:

share mid 2330-s po ung tab ko...:help::help::help:

spyware
14th Mar 2013, 12:34
sir kahit gamitan ko po ng 7zip. ayaw parin error po... tapos pag flash po sa tablet ayaw din po? pls.. help po...:pray::pray::pray::pray::pray::pray:

share mid 2330-s po ung tab ko...:help::help::help:
baka naman corruted yung file mo na dl mo sir?

NikkoJames15
14th Mar 2013, 14:42
Thank you mate!

one thing more, im addled with so many firmwares out there like here You can see links before reply/a13-ab-downloads/4570792769 ...which of these firmwares listed is the most possible cure to her haipad?

:salute::dance::dance::dance::salute:
What's the Haipad's Model? You should find it at the back panel..

mga sir, paano po ba e hard reset yung share na tablet pc ng friend ko, stuck lang kasi siya sa android logo at ayaw ng mag tuloy2x..
at saka iwan ko lang kung anung brand o version ito wala namang naka lagay sa likod, basta meron lang siyang nakalagay na share sa boot logo pag ion..

Reflash na yan. :lol: Ganun lahat ginawa namin. Kung ayaw mo mawalan ng files sa tablet mo try mo normal upgrade mode sa LiveSuit, pero mas recommended ko yung forced upgrade.

sir, ayaw pong gumana sakin... inverted parin yung TS ko... pls. help:pray::pray::pray::pray: nagawa ko naman po ng maayos...

Bumaliktad ba lalo? :lol: Palitan mo yung values ulit hanggang tumama. Trial and error. :)
Make sure na pinalitan mo yung [ctp_para] sections nung tatlong files (COMMON _SYS_CONFIG000000, script.bin, script0.bin) yung x ay para sa inverted na left and right, and y ay para sa up and down na inverted. :lol:

sir kahit gamitan ko po ng 7zip. ayaw parin error po... tapos pag flash po sa tablet ayaw din po? pls.. help po...:pray::pray::pray::pray::pray::pray:

share mid 2330-s po ung tab ko...:help::help::help:

Umm.. Weird. Sure kang dinownload mo lahat ng parts? :lol:

alexa101008
14th Mar 2013, 22:26
SIR NIKKO, nag black naman yung screen ng tab ko...:weep:
ayaw namn mag open ngayon:weep::weep::weep::weep:
pasensya napo sa... pa help namn po...:pray::pray::pray::pray:

vokz
14th Mar 2013, 22:35
sir NIKKO:salute::salute::salute::salute::salute:, maraming salamat nga pla kasi working na yung tab ko...:clap::clap::clap::clap: wifi,cam lahat working na!!!!! thank you talaga:thumbsup::thumbsup::thumbsup:

NikkoJames15
14th Mar 2013, 23:51
SIR NIKKO, nag black naman yung screen ng tab ko...:weep:
ayaw namn mag open ngayon:weep::weep::weep::weep:
pasensya napo sa... pa help namn po...:pray::pray::pray::pray:

That happens when you forget to change all P? to power.. Every time na i-unscript mo ang bin files kelangan mo i-replace yun ulit.

NikkoJames15
14th Mar 2013, 23:59
sir NIKKO:salute::salute::salute::salute::salute:, maraming salamat nga pla kasi working na yung tab ko...:clap::clap::clap::clap: wifi,cam lahat working na!!!!! thank you talaga:thumbsup::thumbsup::thumbsup:

Glad I helped. :thumbsup:

keitaro92
15th Mar 2013, 01:17
Sir Niks!

I loaded the firmware 3 which you gave in the link at the first page. The flashing gone successfully but the only problem is that the Tab's touch screen which i think is not functioning. Is there any possible remedy for this? Thank!:lmao:

NikkoJames15
15th Mar 2013, 03:35
Sir Niks!

I loaded the firmware 3 which you gave in the link at the first page. The flashing gone successfully but the only problem is that the Tab's touch screen which i think is not functioning. Is there any possible remedy for this? Thank!:lmao:

Um.. those are not my links.. I'm actually surprised they still work.. :lol: For non-working components, check the insmod guide on my guide compilation (check my sig). :thumbsup:

keitaro92
15th Mar 2013, 04:22
Um.. those are not my links.. I'm actually surprised they still work.. :lol: For non-working components, check the insmod guide on my guide compilation (check my sig). :thumbsup:

Sir, How will I set the tab into this adb thing whereas the screen do not even function? if thats so, the driver for the device will not be installed in the pc, aint that right? moreover, i tried all the .img file which you posted in this thread but the result still the same some we'rent able to boot and screen arent functioning. :weep:

Hope you can be of great help:pray::pray::help::help::pray::pray:

NikkoJames15
15th Mar 2013, 05:49
Sir, How will I set the tab into this adb thing whereas the screen do not even function? if thats so, the driver for the device will not be installed in the pc, aint that right? moreover, i tried all the .img file which you posted in this thread but the result still the same some we'rent able to boot and screen arent functioning. :weep:

Hope you can be of great help:pray::pray::help::help::pray::pray:

If there is a little Ice Cream Sandwich Android icon in the status bar when you connect it to your PC, then USB debugging is enabled, and you can use ADB. If not, look for another firmware that will make the touch screen work. Check my sig again, I have a list of firmwares.. Q8/Q88 and MID-2330 tablets are very much alike in terms of components..

alexa101008
15th Mar 2013, 12:30
That happens when you forget to change all P? to power.. Every time na i-unscript mo ang bin files kelangan mo i-replace yun ulit.


Sir Nikko, ayaw na yatang mag flash ehh.... black parin yung screen... patulong naman plss....:help::help::pray::pray:

putalittlemore
15th Mar 2013, 12:49
If there is a little Ice Cream Sandwich Android icon in the status bar when you connect it to your PC, then USB debugging is enabled, and you can use ADB. If not, look for another firmware that will make the touch screen work. Check my sig again, I have a list of firmwares.. Q8/Q88 and MID-2330 tablets are very much alike in terms of components..

or you can attach a USB mouse to the tab while TS is not working ... ;)

master nikko ... dami nang kaganapan dito habang wala ako ah ... galing :thumbsup:

keitaro92
15th Mar 2013, 17:31
nagpalit ako ng firmware ulit pumipindot ung touch nya kso pag pumindot ako sa baba sa taas ang pumipindot, ang ok lng ung sa gitna, anu po pwdng magandang gawin at anung mas madaling gawin ung hnd pumipindot o ung pumipindot pero iba ang nagseselect...help po boss

Anung firmware ginamit mo?? pa link naman:beat:

Pamagat
15th Mar 2013, 22:17
sir., ayaw naman po gumagana ung mga link na my password., and compatible po ba ito firmware na po ito sa irobot tab??.,., thankz and godbless., keep on sharing...:salute:

fabz22
16th Mar 2013, 14:21
mga sir pde po ba ako mag tanong d2

tanong ko lang po kung pano mag root ng share tablet.?

saka tanong ko narin po kung my alam ng tablet na ganto " model J-Q88D - ZH&K ung brand....dko po kasi alam kung pde ko to ma upgrade eh or kung pde syang maging mid 2330.....

sana po my makatulong sakin...tnx po...

mike061582
16th Mar 2013, 20:07
sir niko patulong ulet nag dump ako ng firmware ng share k using uberizer
tas nung triny q e restore ayay na gumana ung TS , G.SENSOR , saka WIFI eto ung
init.sun5i.rc ko bka matulungan nio ko kung ano iedit dito.

import init.sun5i.usb.rc

on early-init
export EXTERNAL_STORAGE /mnt/sdcard
mkdir /mnt/sdcard 0000 system system
# for backwards compatibility
symlink /mnt/sdcard /sdcard

mkdir /mnt/extsd 0000 system system
mkdir /mnt/usbhost1 0000 system system
mkdir /databk 0700 root system

on fs
mount ext4 /dev/block/nandd /system wait noatime nodev barrier=0

# try to mount /data
wait /dev/block/nande
mount ext4 /dev/block/nande /data wait noatime nosuid nodev barrier=0
setupfs /dev/block/nande
umount /data
exec /system/bin/logwrapper /system/bin/e2fsck -y /dev/block/nande
exec /system/bin/busybox mount -t ext4 -o noatime,nosuid,nodev,barrier=0,journal_checksum,no auto_da_alloc /dev/block/nande /data

# try to mount /cache
mount ext4 /dev/block/nandh /cache wait noatime nosuid nodev barrier=0
setupfs /dev/block/nandh
umount /cache
exec /system/bin/logwrapper /system/bin/e2fsck -y /dev/block/nandh
exec /system/bin/busybox mount -t ext4 -o noatime,nosuid,nodev,barrier=0,journal_checksum,no auto_da_alloc /dev/block/nandh /cache

format_userdata /dev/block/nandj NUCLEAR

#try to format /databk
wait /dev/block/nandi
mount ext4 /dev/block/nandi /databk wait noatime nosuid nodev barrier=0
setupfs /dev/block/nandi
umount /databk
rmdir /databk

#try to check user partition
wait /dev/block/nandj
exec /system/bin/logwrapper /system/bin/fsck_msdos -y /dev/block/nandj

on boot

#insmod key & tp driver
# insmod /system/vendor/modules/sun4i-ts.ko
# insmod /system/vendor/modules/gt811_ts.ko
# insmod /system/vendor/modules/sun4i-keyboard.ko

#insmod key & tp driver
#insmod /system/vendor/modules/modules4i-keyboard.ko
insmod /system/vendor/modules/sun4i-ts.ko
insmod /system/vendor/modules/gt811_ts.ko
#insmod /systemendor/modules/zet622x.ko
insmod /system/vendor/modules/A13_gslX680.ko
insmod /system/vendor/modules/ft5x_ts.ko

# insmod vibrator
insmod /system/vendor/modules/sun4i-vibrator.ko
chmod 777 /sys/class/timed_output/sun4i-vibrator/enable

#insmod mali driver
insmod /system/vendor/modules/ump.ko
insmod /system/vendor/modules/mali.ko

#insmod video driver
insmod /system/vendor/modules/cedarx.ko


#gsensor module
# insmod /system/vendor/modules/mma7660.ko
# insmod /system/vendor/modules/bma250.ko
# insmod /system/vendor/modules/dmard06.ko
insmod /system/vendor/modules/gsensor.ko
chmod 777/system/usr
#csi module
insmod /system/vendor/modules/videobuf-core.ko
insmod /system/vendor/modules/videobuf-dma-contig.ko
# insmod /system/vendor/modules/siv121d.ko
# insmod /system/vendor/modules/siv121db.ko
# insmod /system/vendor/modules/sun5i_csi0.ko

insmod /system/vendor/modules/gc0308.ko
insmod /system/vendor/modules/sp0838.ko
insmod /system/vendor/modules/siv121d.ko
insmod /system/vendor/modules/gc0329.ko
insmod /system/vendor/modules/gc0309.ko
insmod /system/vendor/modules/gt2005.ko
insmod /system/vendor/modules/hm5065.ko

insmod /system/vendor/modules/gc0308_b.ko
insmod /system/vendor/modules/gc0329_b.ko
insmod /system/vendor/modules/siv121d_b.ko
insmod /system/vendor/modules/sp0838_b.ko
insmod /system/vendor/modules/gt2005_b.ko
insmod /system/vendor/modules/sun5i_csi0.ko

#network module
insmod /system/vendor/modules/usbnet.ko
insmod /system/vendor/modules/asix.ko
insmod /system/vendor/modules/qf9700.ko
insmod /system/vendor/modules/mcs7830.ko
insmod /system/vendor/modules/rtl8150.ko

# usb tether function
insmod /system/vendor/modules/cdc_ether.ko
insmod /system/vendor/modules/cdc_eem.ko
insmod /system/vendor/modules/cdc_subset.ko

# mxc622x gsensor module
# insmod /system/vendor/modules/mecs.ko
# insmod /system/vendor/modules/mxc622x.ko
# chmod 0777 /system/bin/memsicd
# mkdir /data/misc/sensors 0777 system system


# wifi related service
service wpa_supplicant /system/bin/wpa_supplicant -Dnl80211 -iwlan0 \
-c/data/misc/wifi/wpa_supplicant.conf -e/data/misc/wifi/entropy.bin
class main
socket wpa_wlan0 dgram 660 wifi wifi
group system wifi inet
disabled
oneshot

thanks po

alexa101008
16th Mar 2013, 22:49
Originally Posted by NikkoJames15
Reflash instructions via LiveSuit 1.09

1. Download your ROM, an img file, either through my links or through putalittlemore's. Place it in a convenient location.
My ROM: You can see links before reply
putalittlemore's link: You can see links before reply
2. Download LiveSuit 1.09, from You can see links before reply
That is an installer, it will install the needed drivers for your tablet's Upgrade Mode.
3. Open LiveSuit 1.09, then click No when a tutorial dialogue appears. Click on the first icon (an orange cube), navigate to your convenient location, then select the ROM img.
4. Turn your tablet completely off. Insert the USB cable to the port in the tablet, then hold the volume up key.
5. Insert the other end of the USB cable to the USB port of your PC, while still holding the volume up key.
6. While still holding the volume up key, press the power button once every second, continue until the computer detects it and after it installs the driver, you can release the keys.
7. After driver installation, a dialogue box will appear asking if you would like a Forced Upgrade or a Normal Upgrade. Select Yes. LiveSuit will prompt you a second time. Answer Yes again,
8. Wait for it to finish, and when the Upgrade Succeeds appears on your screen, you have reflashed the tablet.
9. Cross your fingers and wait for the lock screen to appear. If it does, check if everything is working. If not, then you have to look for another ROM to flash.

There you have it. A fool-proof guide. Hopefully. No guarantee that the ROMs will work 100%.
Ubos English wew.


sir nikko, thank you dahil gumagana na ang aking share mid 2330-s :clap::clap::clap::clap::clap::clap::clap::clap: galing mo sir:salute::salute::salute::salute::salute:

falsorange
17th Mar 2013, 13:48
sir gud day po may nahanap nba kau na stable ang firmware?.. ung link 2 po ayaw gumana sa akin nang touch.. :( tapos ung link 3 4 5
We could not retrieve this file because the link is invalid. ung nkalagay.. online storage daw.. pa help po tnx..

Muamar
17th Mar 2013, 15:10
@falseorange... wala pa po tayong STABLE FIRMWARE>>> hintay.. hintay nalang po tayo.. ^_^

zhyril24
17th Mar 2013, 17:45
sir. help about my 2330. stuck on android logo then pag recovery menu q only android na labas ang bituka lang walang recovery menu txt.

bakit ganun anong dapat kung gawin sir?

NikkoJames15
17th Mar 2013, 21:10
sir., ayaw naman po gumagana ung mga link na my password., and compatible po ba ito firmware na po ito sa irobot tab??.,., thankz and godbless., keep on sharing...:salute:
Those don't work anymore.. And TS is not responding.. Try mo yung first ROM ko dun sa guide, kasi meron nang MID-2330 na gumana du sa ROM nayon, or you can try the links on my sig (Q8/Q88 ROMS). Haay.. :lol:




mga sir pde po ba ako mag tanong d2

tanong ko lang po kung pano mag root ng share tablet.?

saka tanong ko narin po kung my alam ng tablet na ganto " model J-Q88D - ZH&K ung brand....dko po kasi alam kung pde ko to ma upgrade eh or kung pde syang maging mid 2330.....

sana po my makatulong sakin...tnx po...

Factory-rooted na yan. Install ka nalang ng SuperUser sa Play Store. :thumbsup: Ang J-Q88D ay di pwedeng maging MID-2330.. Kasi iba yung components nila sa loob.. :lol:


sir niko patulong ulet nag dump ako ng firmware ng share k using uberizer
tas nung triny q e restore ayay na gumana ung TS , G.SENSOR , saka WIFI eto ung
init.sun5i.rc ko bka matulungan nio ko kung ano iedit dito.

import init.sun5i.usb.rc

on early-init
export EXTERNAL_STORAGE /mnt/sdcard
mkdir /mnt/sdcard 0000 system system
# for backwards compatibility
symlink /mnt/sdcard /sdcard

mkdir /mnt/extsd 0000 system system
mkdir /mnt/usbhost1 0000 system system
mkdir /databk 0700 root system

on fs
mount ext4 /dev/block/nandd /system wait noatime nodev barrier=0

# try to mount /data
wait /dev/block/nande
mount ext4 /dev/block/nande /data wait noatime nosuid nodev barrier=0
setupfs /dev/block/nande
umount /data
exec /system/bin/logwrapper /system/bin/e2fsck -y /dev/block/nande
exec /system/bin/busybox mount -t ext4 -o noatime,nosuid,nodev,barrier=0,journal_checksum,no auto_da_alloc /dev/block/nande /data

# try to mount /cache
mount ext4 /dev/block/nandh /cache wait noatime nosuid nodev barrier=0
setupfs /dev/block/nandh
umount /cache
exec /system/bin/logwrapper /system/bin/e2fsck -y /dev/block/nandh
exec /system/bin/busybox mount -t ext4 -o noatime,nosuid,nodev,barrier=0,journal_checksum,no auto_da_alloc /dev/block/nandh /cache

format_userdata /dev/block/nandj NUCLEAR

#try to format /databk
wait /dev/block/nandi
mount ext4 /dev/block/nandi /databk wait noatime nosuid nodev barrier=0
setupfs /dev/block/nandi
umount /databk
rmdir /databk

#try to check user partition
wait /dev/block/nandj
exec /system/bin/logwrapper /system/bin/fsck_msdos -y /dev/block/nandj

on boot

#insmod key & tp driver
# insmod /system/vendor/modules/sun4i-ts.ko
# insmod /system/vendor/modules/gt811_ts.ko
# insmod /system/vendor/modules/sun4i-keyboard.ko

#insmod key & tp driver
#insmod /system/vendor/modules/modules4i-keyboard.ko
insmod /system/vendor/modules/sun4i-ts.ko
insmod /system/vendor/modules/gt811_ts.ko
#insmod /systemendor/modules/zet622x.ko
insmod /system/vendor/modules/A13_gslX680.ko
insmod /system/vendor/modules/ft5x_ts.ko

# insmod vibrator
insmod /system/vendor/modules/sun4i-vibrator.ko
chmod 777 /sys/class/timed_output/sun4i-vibrator/enable

#insmod mali driver
insmod /system/vendor/modules/ump.ko
insmod /system/vendor/modules/mali.ko

#insmod video driver
insmod /system/vendor/modules/cedarx.ko


#gsensor module
# insmod /system/vendor/modules/mma7660.ko
# insmod /system/vendor/modules/bma250.ko
# insmod /system/vendor/modules/dmard06.ko
insmod /system/vendor/modules/gsensor.ko
chmod 777/system/usr
#csi module
insmod /system/vendor/modules/videobuf-core.ko
insmod /system/vendor/modules/videobuf-dma-contig.ko
# insmod /system/vendor/modules/siv121d.ko
# insmod /system/vendor/modules/siv121db.ko
# insmod /system/vendor/modules/sun5i_csi0.ko

insmod /system/vendor/modules/gc0308.ko
insmod /system/vendor/modules/sp0838.ko
insmod /system/vendor/modules/siv121d.ko
insmod /system/vendor/modules/gc0329.ko
insmod /system/vendor/modules/gc0309.ko
insmod /system/vendor/modules/gt2005.ko
insmod /system/vendor/modules/hm5065.ko

insmod /system/vendor/modules/gc0308_b.ko
insmod /system/vendor/modules/gc0329_b.ko
insmod /system/vendor/modules/siv121d_b.ko
insmod /system/vendor/modules/sp0838_b.ko
insmod /system/vendor/modules/gt2005_b.ko
insmod /system/vendor/modules/sun5i_csi0.ko

#network module
insmod /system/vendor/modules/usbnet.ko
insmod /system/vendor/modules/asix.ko
insmod /system/vendor/modules/qf9700.ko
insmod /system/vendor/modules/mcs7830.ko
insmod /system/vendor/modules/rtl8150.ko

# usb tether function
insmod /system/vendor/modules/cdc_ether.ko
insmod /system/vendor/modules/cdc_eem.ko
insmod /system/vendor/modules/cdc_subset.ko

# mxc622x gsensor module
# insmod /system/vendor/modules/mecs.ko
# insmod /system/vendor/modules/mxc622x.ko
# chmod 0777 /system/bin/memsicd
# mkdir /data/misc/sensors 0777 system system


# wifi related service
service wpa_supplicant /system/bin/wpa_supplicant -Dnl80211 -iwlan0 \
-c/data/misc/wifi/wpa_supplicant.conf -e/data/misc/wifi/entropy.bin
class main
socket wpa_wlan0 dgram 660 wifi wifi
group system wifi inet
disabled
oneshot

thanks po

I can't tell what you need.. Kelangan ko yung mismong model number and at least a list of your components/modules. If you want to do things yourself, check the insmod guide, di lang init.sun5i.rc yung ieedit. :)


sir gud day po may nahanap nba kau na stable ang firmware?.. ung link 2 po ayaw gumana sa akin nang touch.. :( tapos ung link 3 4 5
We could not retrieve this file because the link is invalid. ung nkalagay.. online storage daw.. pa help po tnx..

Again, TS is nowhere in sight.. :lol: Try ka nalang ng ibang ROMs dyan sa sig ko..


sir. help about my 2330. stuck on android logo then pag recovery menu q only android na labas ang bituka lang walang recovery menu txt.

bakit ganun anong dapat kung gawin sir?

Reflash. Wala po kasi talagang recovery mode ang A13 tablets, so nilalagyan natin ng ClockWorkMod (cwm) Recovery. Backread nalang or check my guides. Hope you find a working ROM. If you don't.. Check the guides for your problem's possible solution. Kung ayaw talaga, hanap nalang ng iba.. Ganyan talaga eh. :lol:

zhyril24
17th Mar 2013, 23:58
sir error po e2 alam nyo po b?

sprite update error: fail to get envirement
sprite update error: current card failed now hold the machine

ano po dapat gawin q?
try to find new firmware po b ibig sabihin nyan pag d gumana?

putalittlemore
18th Mar 2013, 00:01
@NikkoJames15l

ilink mo na yung JB rom ni toxicro ... tingin ko, mas madaling mag ayos ng rom nya compared sa ICS ... add lang ng drivers through .bat file ... and konting configure sa JB file ... ok na ... yun lang hindi compatible yung rom nya sa mga tabs na may dual cam ... for now may tinetesting pa ko na ibang JB rom ... baka sakaling gumana dual cam ...

though malamang sasakit na naman ulo mo nyan kakabigay ng bat files ... :upset: ... parang yung ginagawa nya sa kabila ...

NikkoJames15
18th Mar 2013, 01:11
sir error po e2 alam nyo po b?

sprite update error: fail to get envirement
sprite update error: current card failed now hold the machine

ano po dapat gawin q?
try to find new firmware po b ibig sabihin nyan pag d gumana?

If you backread a little or read my guides, sprite errors are caused by PhoenixCard. I still have no idea kung bakit ayaw ng PhoenixCard sa ibang memory card. :noidea: Just use LiveSuit, much easier. :thumbsup: Pag ayaw pa sa LiveSuit, look for a new ROM nalang.


@NikkoJames15l

ilink mo na yung JB rom ni toxicro ... tingin ko, mas madaling mag ayos ng rom nya compared sa ICS ... add lang ng drivers through .bat file ... and konting configure sa JB file ... ok na ... yun lang hindi compatible yung rom nya sa mga tabs na may dual cam ... for now may tinetesting pa ko na ibang JB rom ... baka sakaling gumana dual cam ...

though malamang sasakit na naman ulo mo nyan kakabigay ng bat files ... :upset: ... parang yung ginagawa nya sa kabila ...

Well, I was planning na ipopost ko dito yung FaaastJB and yung MID-2330-S-compatible na .bat file pag napagana namin ni Toxicro.. Pangit kasi kung ilalagay ko na tapos di naman gumagana. :lol: Tsaka parang di pa stable yung JB sa akin, puro app-crash..

Penge naman ng link dun sa ibang JB via PM.. Try ko din.. :lol:

By the way yung 5000mAH battery replacement ko ay.. AWESOME. Hahaha. 6-8 hours ng movie-watching. :excited::dance::clap::beat::yipee:

NikkoJames15
18th Mar 2013, 01:37
Link to Toxicro's FaaastJB v1 ROM for A13 tablets..
You can see links before reply

Jelly Bean 4.1.1. Just don't ask me if it doesn't work 100%. This one requires some tech skills. :lol: You have to cooperate with Toxicro if something's not working.

IMPORTANT NOTE: Read the whole thread. Alamin nyo kung ano usually yung hinihingi nya based on your problem and find out how to get it (dmesg, .ko files, script.bin, camera.cfg, etc.) They don't take kindly to "n00bs" in there.. Especially si satcomranger.. :lol: Mga pro yan, hopefully magawan ng paraan yung mga gustong mag Jelly Bean.. ;)

fabz22
18th Mar 2013, 08:49
sir nik tnx po sa pag sagot....

ask ko narin po kung pano gamitin ung SD CARD kasi pag iniinsert ko SD card ko tapos ililipat ko ung ibang files ang ngyayari po d ma read ng tablet ung ibang games kasi nasa SD card ung ibang files....

maliit nalang kasi ung external memory nya kaya want ko sana ilipat sa SD car nalang lahat ng files ko...

pag nag move to sd card ako ng apps dun sya nalilipat sa mismong external memory nya ndi sa sd card.....

tnx po ng marami..

zhyril24
18th Mar 2013, 10:48
@Sir.Nikko

sir. d q po mapagana ang LiveSuit sinunod q nmn lahat ng tutorials nyo po pero d sya ma detect pag ginagamit q na ang LiveSuit. any suggestion sir?

putalittlemore
18th Mar 2013, 11:50
Well, I was planning na ipopost ko dito yung FaaastJB and yung MID-2330-S-compatible na .bat file pag napagana namin ni Toxicro.. Pangit kasi kung ilalagay ko na tapos di naman gumagana. :lol: Tsaka parang di pa stable yung JB sa akin, puro app-crash..

Penge naman ng link dun sa ibang JB via PM.. Try ko din.. :lol:

By the way yung 5000mAH battery replacement ko ay.. AWESOME. Hahaha. 6-8 hours ng movie-watching. :excited::dance::clap::beat::yipee:

di pa ba gumagana sayo yung rom nya? saken ako na lang nag ayos e ... masyado busy yung tao kakabigay ng bat files sa ibang poster ... bago pa nya nabigay saken yung bat .. naayos ko na ... pinag aralan ko na lang ... ano cam driver mo, baka sakali meron ako dito ... try kong ayusin ... natabunan na yung post mo dun sa kabila ... baka di na mapansin ni toxicro yun ...

expected na raw sa first gen JB rom yung mga bugs based sa mga nabasa ko ... kaya ngayon yung ibang tab naka 4.1.2 na ... mas stable syempre ...

magkano score mo sa new batt pack? parang high-end tab na yan ... share naman kung san meron ... :clap:

zhyril24
18th Mar 2013, 14:45
guys ask nmn. na detect n ung USB via LiveSuit pero hanggang dun lng sya walang ng yayare. sino nakakaranas ng ganitong problema? minsan d sya ma detect.

tapos minsan kahit anong Micro SD card ang lagay q sa SHARE MID-2330 Redbar tapos mag loloading ng GREEN tapos Fail Split file daw. san po my mali dun mga sir?

ni download q nmn ang mga Firmware n and2 sa thread. thanks for helping!



sir nikko help!