Welcome back, Guest!
Register
Forgot your Password?

Hello, Guest! Welcome to Symbianize Forum.

Most of our features and services are available only to our members. So we encourage you to login or join us by registering a new account. Registration is free, fast, and simple. You only need to provide a valid email address so we can minimize spammers. As a Symbianize member you'll have the following privileges:

All that and more, so what are you waiting for, join us now! Ito ang website na ginawa ng pinoy para sa pinoy!

Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: bm622m 2012....

  1. #1

    Default bm622m 2012....

    blank wan na po kya ito mga boss.....

    nakalagay sa wan nya ILLEGAL HACKED DETECTED pati din sa LAN nya....


    hindi din ako makalog in sa GUI nya....

    wla po ss kasi tinawag lang sakin ng kakilala ko........

  2. #2

    Default Re: bm622m 2012....

    remoted yan try mo magchange mac if ayaw na try winspreader.

  3. #3

    Default Re: bm622m 2012....

    Quote Originally Posted by e i o j [Link available to registered users only. Click here to register.]
    blank wan na po kya ito mga boss.....

    nakalagay sa wan nya ILLEGAL HACKED DETECTED pati din sa LAN nya....


    hindi din ako makalog in sa GUI nya....

    wla po ss kasi tinawag lang sakin ng kakilala ko........
    yep.. REMOTE case yan brad.

  4. #4

    Default Re: bm622m 2012....

    Quote Originally Posted by an2ny08 [Link available to registered users only. Click here to register.]
    remoted yan try mo magchange mac if ayaw na try winspreader.


    ndi po ako ma pag change ma eh,hindi po kasi nka enable telnet...nd din po ako makapasok sa gui....

  5. #5

    Coffee Re: bm622m 2012....

    Quote Originally Posted by e i o j [Link available to registered users only. Click here to register.]
    blank wan na po kya ito mga boss.....

    nakalagay sa wan nya ILLEGAL HACKED DETECTED pati din sa LAN nya....


    hindi din ako makalog in sa GUI nya....

    wla po ss kasi tinawag lang sakin ng kakilala ko........



    paano mo nakita yang ILLEGAL HACKED DETECTED sa wan kung di naka pag login sa GUI,. tsk tsk tsk, ang tao talaga...

  6. #6

    Default Re: bm622m 2012....

    Quote Originally Posted by hummerhead [Link available to registered users only. Click here to register.]
    paano mo nakita yang ILLEGAL HACKED DETECTED sa wan kung di naka pag login sa GUI,. tsk tsk tsk, ang tao talaga...
    Siguro sir sa Public Info nya nakita. 22m ehh

  7. #7

    Default Re: bm622m 2012....

    Quote Originally Posted by trunks [Link available to registered users only. Click here to register.]
    Siguro sir sa Public Info nya nakita. 22m ehh

    tama ka sir sa Public Info ko nakikita.....ano po kya solution?

  8. #8

    Default Re: bm622m 2012....

    1. open winspreader
    2. select bm622m 2012 firmware
    3. select proper lan card
    4. tick start
    5. insert rj45/lan cable
    6. insert power supply
    7. wait mo lang atleast 10 min para sureball pasok yung firmware
    8. after 10 min acces mo gui mo kung na oopen muna sa default 192.168.254.1
    9. pag ok na ma access muna pasok mo ngyn acl to enable telnet or pang tamad gamit ka bm622m 2012 by lavaboy enable telnet button
    10. pag ok na telnet open cmd then type telnet 192.168.254.1
    Login:Firefly
    Pass:$P4mb1h1r4N4m4nT0!!

    at prompt type:
    apinfo > /etc/default.cfg (press enter)
    sncfg reset (press enter)
    reboot

    wait for a modem reboot (wait 1 min)
    11. wag po stop yung winspreader after reboot makikita nu mag rereflash siya ulit same firmware pero my signal bar flashing na or indicator na ng proprogram sya pag tumigil na sa blinking yung signal bar tpos na flashing nya yung lan nalang ng bliblink
    12. stop winspreader then reset hole button solve na yan
    13. may chance pong vintage issue ang sosonud na problema atleaset magagamit muna yan.
    14 .change mac
    15. done

    ps: pasensya na mahaba masyado yung process but worth it tested by me kay drex27 po ang tut nato...

    ito ang nka ayos sa modem ko na limited connection

  9. #9

    Default Re: bm622m 2012....

    Quote Originally Posted by farhan25 [Link available to registered users only. Click here to register.]
    1. open winspreader
    2. select bm622m 2012 firmware
    3. select proper lan card
    4. tick start
    5. insert rj45/lan cable
    6. insert power supply
    7. wait mo lang atleast 10 min para sureball pasok yung firmware




    8. after 10 min acces mo gui mo kung na oopen muna sa default 192.168.254.1
    9. pag ok na ma access muna pasok mo ngyn acl to enable telnet or pang tamad gamit ka bm622m 2012 by lavaboy enable telnet button
    10. pag ok na telnet open cmd then type telnet 192.168.254.1
    Login:Firefly
    Pass:$P4mb1h1r4N4m4nT0!!

    at prompt type:
    apinfo > /etc/default.cfg (press enter)
    sncfg reset (press enter)
    reboot

    wait for a modem reboot (wait 1 min)
    11. wag po stop yung winspreader after reboot makikita nu mag rereflash siya ulit same firmware pero my signal bar flashing na or indicator na ng proprogram sya pag tumigil na sa blinking yung signal bar tpos na flashing nya yung lan nalang ng bliblink
    12. stop winspreader then reset hole button solve na yan
    13. may chance pong vintage issue ang sosonud na problema atleaset magagamit muna yan.
    14 .change mac
    15. done

    ps: pasensya na mahaba masyado yung process but worth it tested by me kay drex27 po ang tut nato...

    ito ang nka ayos sa modem ko na limited connection



    sir bakit pag select ko po ng bm622m firmware hindi makita dinownloa ko.....................


    pwede po b makahingi ng firmware.....salamat po........................

  10. #10

    Default Re: bm622m 2012....

    Quote Originally Posted by e i o j [Link available to registered users only. Click here to register.]
    sir bakit pag select ko po ng bm622m firmware hindi makita dinownloa ko.....................


    pwede po b makahingi ng firmware.....salamat po........................


    [Link available to registered users only. Click here to register.]

Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •