[dontwotymz]

Ganito p0 y0n. Pagka-plug ko ng pc ko sa outlet, hindi ko naman pinipindot yung p0wer button ng cpu eh naka-on na kaagad. Then pagbukas ko ng monitor, wala namang nasasagap na signal, as in nagbiblink lang yung LED ng p0wer button niya. Ano pong problema at sulosyon para dito? Ang pc ko ay DELL Optiplex. Thanks!

[nOosadz]

aw. dontwotymz

we have same worst experience with that.. dapat talaga you shutdown well your pc after using it.. like on your situation... pagka plug mo sa outlet.. then naka on agad? its weird .. it will always start turn on your power button to your system.. about blinking the led light.. that's situation have same on me also... the cause of that is your motherboard.. maybe something wrong with your motherboard... but before taking action on your motherboard

- Do 1st checking the memory slots... replace well the memory ... plug off then plug it back on the slot...

- check your system.. turn the power button if its working well..

- If not, go back to the memory slot.. try to clean your memory(RAM) w/ eraser... then go back to the previous step.

- If it doesn't then do action with your motherboard.. checked well baka hindi na mag function ang motherboard like what happened also in my past motherboard..

- try to apply it on other computer if ok pa ang motherboard mo... if you're not good with this assembling and disassembling parts of your PC then try to contact you're technician to assist you..

Good Luck!

[elitedarkangel]

Check your RAM and Video Card. Those two are the most cause of it. If not, Its your motherboard.

You can say if its just the monitor itself has the problem when you heard that your CPU boots well.

Goodluck!

[antigloria2010]

video card yan tol, kalasin o tapos linisan mo pati ung mga ipin,

[boplox]

ui halos sakto pala tong thread problem ko ngayon..

yung akin kasi may konting pagkakaiba lang..pagturn-on ko ng pc walang lumalabas sa monitor tapos long beep..

about dun sa video card..pano ba ichecheck kung ok pa yung video card?..itetest sa ibang pc?..

[xander_kain]

Originally Posted by boplox

ui halos sakto pala tong thread problem ko ngayon..

yung akin kasi may konting pagkakaiba lang..pagturn-on ko ng pc walang lumalabas sa monitor tapos long beep..

about dun sa video card..pano ba ichecheck kung ok pa yung video card?..itetest sa ibang pc?..

bossing eto solusyon sa beeping problems mo
majority ng Bios ganyan ang beep codes pag may error

1 short beep Normal POST - system is ok
2 short beeps POST Error - error code shown on screen
No beep Power supply or system board problem
Continuous beep Power supply, system board, or . keyboard problem
Repeating short beeps Power supply or system board problem
1 long, 1 short beep System board problem
1 long, 2 short beeps Display adapter problem (MDA, CGA)
1 long, 3 short beeps Enhanced Graphics Adapter (EGA)
3 long beeps 3270 keyboard card

sana makatulong

[seth11]

try mo gamitin yung onboard kung bubukas yung monitor mo, pag bumukas VC na may problem or try mo sa ibang pc yung monitor and VC pag ok naman pareho might be mobo na may tama

[dontwotymz]

thanks sa inyo, naayus ko din pc ko. Ginawa ko chineck ko yung RAM then nilinis ko ang mga pin then pagkabalik ko , ini-on ko na at ayun, gumana nga! Kung sa technician ko pinatingin ito malamang magastusan ako ng 300 hehe

[boplox]

Originally Posted by xander_kain

bossing eto solusyon sa beeping problems mo
majority ng Bios ganyan ang beep codes pag may error

1 short beep Normal POST - system is ok
2 short beeps POST Error - error code shown on screen
No beep Power supply or system board problem
Continuous beep Power supply, system board, or . keyboard problem
Repeating short beeps Power supply or system board problem
1 long, 1 short beep System board problem
1 long, 2 short beeps Display adapter problem (MDA, CGA)
1 long, 3 short beeps Enhanced Graphics Adapter (EGA)
3 long beeps 3270 keyboard card

sana makatulong

thanks po sa info sir..ngayon nakita ko na problem ko..

MB pala problema..lagot na