Be sure to follow the steps correctly as we shall not be held liable
in case you mess your connection. This is for Windows XP only.
Please ensure that you make a restore point before you proceed
as this is an indirect registry modification.
Shall we start?
* Download TCP Optimizer
- a free program for optimizing
dial-up, DSL and cable internet connections.
* Run TCP Optimizer (FYI: the executable file is standalone so
there's no installation needed).
* In the General Settings tab, do the following:
o [Check] Custom settings
o [Check] Modify All Network Adapters
o Your network adapter will be automatically selected, if
not type your adapter manually.
o MTU: 1452 (Read complete definition of MTU)
o TTL: 64 (Read complete definition of TTL)
o TCP Receive Window: 937500
o MTU Discovery: Yes
o Black Hole Detect: No
o Selective Acks: Yes
o Max Duplicate ACKs: 3
* In the TCP 1323 Options, uncheck both Windows Scaling and
* In the Advanced Settings tab, put the following:
o Max Connections per Server: 16
o Max Connections per 1.0 Server: 16
o LocalPriority: 1
o Host Priority: 1
o DNSPriority: 1
o NetbtPriority: 1
o Lan Browsing speedup: optimized
o QoS: NonBestEffortLimit: 0
o ToS: DisableUserTOSSetting: 0
o ToS: DefaultTOSValue: 80
o MaxNegativeCacheTtl: 0
o NetFailureCacheTime: 0
o NegativeSOACache Time: 0
o LAN Request Buffer Size: 128000
* Setting the slider anywhere between 1500 to 3000 kbps
range is your discretion until you get satisfactory speed.
* Click 'Apply Changes' and reboot your computer for the
changes to take effect.
if it didnt work add this items.
Tweak the Network Redirector Buffers
By increasing the number of these buffers, you may get a higher
transfer rate for the data that travels though the network. Open
the Registry Editor navigate to this location:
HKEY_LOCAL_MACHINE > System > CurrentControlSet > Services
> LanmanWorkstation > Parameters
Using the procedure explained in the previous tweak, add two
new DWORD values:
MaxCmds and MaxThreads
Give both the same value between 0 and 255. It is recommended
to choose the value of 64.
use that..its better...then reboot to feel the changes,,, naks