[marvin378]

These are instructions on how to jailbreak your iPhone 3GS and iPhone 4 using Limera1n for Windows. Limera1n supports iOS 4.0, 4.0.1, 4.0.2, and 4.1.

UPDATE : The third version of Limera1n is out now. It fixes a bug with the iPhone 3GS on the new bootrom.


NOTE 1: Do not update to iOS 4.1 if you need the unlock. Ultrasn0w does not support that baseband yet.

NOTE 2: IF you wan't to Update your iPhone 4 from version 4.0,4.0.1,4.0.2 to 4.1 without Upgrading the Modem Firmware(Base Band) to Use Ultrasn0w Unlock, check guide HERE

Step One
Open your web browser of choice and navigate to
*Only fully-registered users can see this link.*
. Click the Download for Windows link at the bottom of the screen.



Step Two
When prompted save the download to your desktop



Step Three
Double click the limera1n.exe file from the desktop to launch the application



Step Four
Click the large make it ra1n button



Step Five
You iPhone will now be placed in recovery mode.



Press both the power and the home buttons.



When Limera1n asks you to, release the power button.



Your phone will now be in DFU mode



As limera1n performs its exploit you will see the image of a lime raindrop on your iPhone.



Limera1n will let you know when it is complete.



Step Six
Once your device reboots you will see a new icon on the SpringBoard entitled limera1n. Press it to continue.



Step Seven
Once Limera1n opens select Cydia then press the Install button at the top right of the screen.



Step Eight
Once the Cydia installation has completed you must reboot your iPhone.



Step Nine
When your iPhone has restarted you can run Cydia. Let it do all the necessary updates then follow our Unlock tutorial if possible for your device.



NOTE*: To remove the limera1n icon from your desktop you can install CyDelete from Cydia then use it to delete the application. Eventually this capability should be present in limera1n itself.

(iClarified)

[marvin378]

Supported iDevices:
* iPhone 3GS, iPod Touch 3G, iPad(3.2.1-3.2.2) iPhone 4, iPod Touch 4G (4.0-4.1)

Temporary
* 3GS new bootrom is broken, fix pending

[pugo]

pafs kelangan pa ba to ng itunes? try ko san sa itouch ver. 4.0.2

[marvin378]

Originally Posted by pugo

pafs kelangan pa ba to ng itunes? try ko san sa itouch ver. 4.0.2

Kailangan nyo pong mag install ng iTunes para gumana yung limera1n...

Pero dindi nyo na po gagamitin ang itunes para mag jailbreak.

[pugo]

sir pano magdownload ng cydia wala kasi ako wifi connection..

[marvin378]

Kailangan nyo po ng Wifi

[mieda]

sir marvin pede na po ba un iphone 3gs ko na new bootrom sa l1merain? salamat po sa reply

[crazyhog]

proven/tested na ba eto?

mine is Itouch 4G ( 4.1 / MC model )

and newbie po. so mejo hesitant!

salamat in advance

[apongus]

boss Marvs, GREAT NEWS to. ibig sabihin ba nito majjailbreak ko na ung iphone 3gs ko na 4.1 firmware (updated in itunes) na hindi ko magamit kasi di pa naactivate and hinahanapan ng official SIM? fixed na po yata yung 3GS Newbootrom compatibility nya, sabi kasi dun sa download site, BETA 3 changelog.

[marvin378]

Originally Posted by mieda

sir marvin pede na po ba un iphone 3gs ko na new bootrom sa l1merain? salamat po sa reply

May Problem pa po sa mga New Bootrom na 3GS...

Pano nyo po nalaman na New Bootrom ang 3GS nyo po?

Originally Posted by crazyhog

proven/tested na ba eto?

mine is Itouch 4G ( 4.1 / MC model )

and newbie po. so mejo hesitant!

salamat in advance

Tested ko na po sa iTouch 4G ko po mismo Works Fine...

Originally Posted by apongus

boss Marvs, GREAT NEWS to. ibig sabihin ba nito majjailbreak ko na ung iphone 3gs ko na 4.1 firmware (updated in itunes) na hindi ko magamit kasi di pa naactivate and hinahanapan ng official SIM? fixed na po yata yung 3GS Newbootrom compatibility nya, sabi kasi dun sa download site, BETA 3 changelog.

Old bootrom po ang 3GS nyo diba po?

Kung ganun ay Pwedeng pwede po ito sa 3GS nyo