[cutecedgar]

This guide will tell you how to convert your K610/K618/V630 to a W660 without the bugs (Like the Walkman crashing).

What you gain by flashing to W660

* Walkman 2 (You can skin it!)
* Flash Support (Standby, Screensaver and Menu)
* TrackID
* Updated Java version
* Patches
* If your phone is branded, this will debrand it.


Important Notice
This procedure will void your warranty!
And a problem during the procedure may and probably will damage your phone.
And if your phone does get damaged, in no way is it my responsibility!
DO THIS AT YOUR OWN RISK!
YOU HAVE BEEN WARNED!


Step 1: Backing up your files.
Everything saved on the phone will be deleted!

So backup your contacts to your memory card:
Contacts > Options > Advanced > Backup to M.S.

Use MyPhoneExplorer to backup your messages:

*Only fully-registered users can see this link.*


And also move your stuff that's saved on the phone to your Memory Stick.

Note: Applications and Games will be deleted, regardless of being saved on the phone or Memory Stick.

Once you've backed up your stuff, move onto Step 2.

Step 2: Flashing the firmware.
If you wish to keep your warranty and not continue, STOP NOW!

First update your phones firmware via Sony Ericsson Update Service:

*Only fully-registered users can see this link.*

(Select your real phone here, K610/K618/V630, NOT W660!)
Just follow the instructions.

Once your phone has been updated, download XS++ 3.1:

*Only fully-registered users can see this link.*


Once downloaded, open XS++.exe, and connect your phone.
Once connected, it should display some information about your phone.
The EROM CID must be 52 (OTP CID doesn't matter).
Now, click the GDFS tab then click 'Backup GDFS'.
This will make a backup of your GDFS, which will restore your phone in 90% of cases of a bad flash.

Do not disconnect during "flashing" operations or you may damage your phone!
Only disconnect your phone when XS++ says "Disconnected... Unplug the phone"!

Once the GDFS backup is done, XS++ will disconnect your phone.

You need a:

* MAIN
*Only fully-registered users can see this link.*

* FS (Must also be R8BB001, find some
*Only fully-registered users can see this link.*
.)
* Custpack (Must have same region as FS)


You also need:

* K610 Camera Drivers (Download:
*Only fully-registered users can see this link.*
)
* K610 Display Driver (Download:
*Only fully-registered users can see this link.*
)
* Modified Light Effect (Download:
*Only fully-registered users can see this link.*
)
* SEtool2 Lite 1.11 (Download
*Only fully-registered users can see this link.*
)
* Illumination Patch (Download:
*Only fully-registered users can see this link.*
)

Password for Archives: solidsnake204

Once you've got the firmware, open the Custpack and extract it (with Folders!) to the own_custpack folder in the XS++ directory.
Make sure that your phone is charged 100%!
Once you've done that open XS++ and then connect your phone.
It should automatically go to the Flash tab.
Tick 'Flash Main Firmware' and browse to the MAIN file. (It should be a .mbn file)
Tick 'Flash File System' and browse to the FS file. (It should be a .fbn file)
Tick 'Customize File System' and in 'Phone Model' select 'Own custpack'

Your XS++ screen should look similar to this:

Now click 'Flash'.
Once it's done, XS++ will say "Disconnected... Unplug the phone"
When it says that, unplug the USB cable, take out then re-insert the battery, then turn it on.
It should turn on find, but you will notice that the screen colours are inverted, and the walkman will crash when run.
We'll be fixing those problems in the next few steps.

Step 3: Fixing the screen, camera, and partly the walkman.
Switch off the phone, remove then reinsert the battery and start XS++.
Connect your phone, and click on the FSX tab, then click 'Start FSX'
Now wait until XS++ says "Device FS mapped...OK!"
Now browse to ifs/settings/display. You should have a screen like this:

Now download K610_Pack_1.zip and extract the dispdriver0.dat, then drag the file into the 'Enumerated Files' pane, XS++ will now upload the new display driver.
Now browse to ifs/settings/camera, extract the camdriver0.dat and camdriver1.dat from the ZIP and again place them in the 'Enumerated files' pane.
Now browse to tpa/preset/system/lighteffects/system, extract the power_up_musicmode.ble from the ZIP and drag into the 'Enumerated Files' pane.
Now click 'Shutdown FSX', and when XS++ says to, disconnect your phone.


Step 4: Making the walkman work.

This process can take a while! If you don't have much time, do not do this now!

Download SEtool2 Lite 1.11
*Only fully-registered users can see this link.*
and extract it somewhere.
Now, go into the SEtool2 Lite folder then into the qamaker folder, and drag your MAIN file onto the qamaker.exe icon, a 'Quick Access Patch' will be made.

~ The Quick Access Patch is required to patch DB2020 CID52 phones ~

Now start SEtool2 Lite, select W660 as the phone type and then click 'Read GDFS'.
It will make a copy of your GDFS, like XS++ did, and DO NOT disconnect the phone or press Stop until SEtool says "Elapsed: xx secs."
Disconnect the USB cable, remove the battery then reinsert it.

Make sure W660 is selected as Phone Type, tick 'Bypass DB2020 security'.
In the files box, click 'Add' and add the MAIN file.
Then in the MISC files box, add the Quick Access patch you generated not long ago.
Your SEtool2 LITE window should look a bit like this:

If it does, click FLASH.

It will then ask you to connect your phone, so connect it, and it will begin.
During the process, it may ask you to unplug the phone, remove then reinsert the battery, click READY then connect the phone.
So don't leave the computer or minimise the window!

During the process, it may look like the program has stopped/crashed/finished but it hasn't!
DO NOT DISCONNECT THE PHONE!
Only disconnect when SEtool2 LITE says "Elapsed: xx secs."
This process may take about 30 mins!

Once done, SEtool2 LITE will say "Elapsed: xx secs." (Or "Elapsed: xxxxxx secs." )
Unplug the phone, remove the battery then reinsert it.

-That's the long bit over-

Download W660_R8BB001_Patches.zip (from the bottom) and extract the illumination patch.
Now in SEtool2 Lite, make sure W660 is selected as Phone type, uncheck 'Bypass DB2020 security', and check 'Use "quick access" patch', (if it hasn't already) remove the MAIN from the files box, and in the MISC files box, browse to the Illumination Patch you just extracted.
Your SEtool Lite window should look a bit like this:

If it does, then click WRITE SCRIPT.
Take care NOT to press WRITE GDFS as that will damage your phone!

It will now patch your phone, now a lot quicker because you just applied the quick access patch.

Once SEtool2 Lite has finished (when it says "Elapsed: xx secs.") disconnect your phone, remove the battery then reinsert, then turn it on.
Don't just automatically go to the walkman as it will crash, because you need to set the brightness to 50% or 60%.

Once you've set the brightness, walkman will work. Enjoy!

Thanks to SOLIDSNAKE204

[cutecedgar]

Dami nag view wala man lang nag "THANKS"

[elmo37]

may mababago ba sa mga menu pag iconvert ko sa w660?may mga mawawala ba? ano mga madadagdag?

[cutecedgar]

Dude nakasulat na po sa itaas, paki basa lang po ng maige

[manson]

pede po paturo pano mg add ng flash themes... tnx

[jarey_honesty]

ei..help namn po cute edgar..nalilito lang po ako dito..
* FS (Must also be R8BB001, find some here.)
* Custpack (Must have same region as FS)

..di ko alam kung ano ang idadownload sa custpack..at kung san..pwede po bang pabigay ng link dun sa custpack..i'm planning to convert my k610 to w660..sana matulungn mo po ako..nadownload ko na nga pala ung FS..eto po xa.. W660_R8BB001_FS_APAC_RED52.fbn.RAR ...tama po ba?

[jarey_honesty]

yehey..walkman w660i na ang k610i ko..sa wakas..ang ganda nga...

[botski.®]

pwd b yan sa w810i ko?

[rustic0_0174]

tol ako ulet to. my tatanong sana ko sayo. panu ng magconvert ng CID 51 to 52? nagiging CId 53 na kapag SEUS ang gagamitin. hndi ko maconvert k618 to w660. my iba pa bang paraan?
thanks again!!!!!!!!

[bencher]

hahahay matagal nga sha... pero d pa ako tapos mag 1 hour na ako.. pero walkman naman sha kanina pag on and off ko... dun na ako sa se tool... hahay... sana nakinig ako sa payo ng forum... kase kailangan ko ng matulog