[jehpoy17]

FOLLOW LANG PO YUNG STEP. DI KAYO MAGKAKAPROBLEMA

1. DOWNLOAD
*Only fully-registered users can see this link.*

2. DOWNLOAD
*Only fully-registered users can see this link.*

3. DOWNLOAD AND INSTALL
*Only fully-registered users can see this link.*


4. EXTRACT NYU UNG DINAWNLAOD NYUNG FIRMWARE
5. OPEN MULTI-LOADER
6. CHECK BRCM2133
CHECK FULLDOWNLOAD

6. BROWSE NYU YUNG INEXTRACT NYU KANINA
CLICK BOOT select BOOTFILE
CLICK Amss select apps_compressed.bin
CLICK Rsrc1 select Rsrc_S3850_Open_Arabic_Common_OJP.rc1
CLICK Rsrc2 select Rsrc2_S3850(Low).rc2
CLICK FACTORY FS select FactoryFs_S3850_Open_Arabic_Common_OJP.ffs
CLICK CSC select CSC_S3850_Open_Arabic_Common_OJP.csc
CLICK SHP APP select ShpApp.app
CLICK PFS select PFS_S3850_Open_Arabic_Common_OJP_JPKK2.pfs
AND THE REST LEAVE IT BLANK



7. THEN CLICK PORT SEARCH
8. CLICK DOWNLOAD
WAIT TO FINISH DOWNLOADING THEN YOUR CELLPHONE MUST AUTO RESTART.


THEN CHANGE UR PHONE FROM KOR
1. ON KEYPAD TYPE *#5239870*#

2. Select Pre-configuration
3. Enter *#27236*#
4. Select JED and press Install
5. Phone will restart

CONGRATS QWERTY PAD KANA!

[roxjhun]

panu po ba malalaman ung kung anung frimware ung iyong phone?

[yhew18]

100% gumagana po ba toh ?
baka namn po my side effect pag ginawa or baka pg ngkamali k ng gawa masira ung cp ntn ??

[jehpoy17]

Originally Posted by roxjhun

panu po ba malalaman ung kung anung frimware ung iyong phone?

Di ko po alam.. Pero pagnag upgrade ka ng Firmware
mas maayos na yung keypad mo kasi yung nextline button nasa kanan na. and space nasa baba

Originally Posted by yhew18

100% gumagana po ba toh ?
baka namn po my side effect pag ginawa or baka pg ngkamali k ng gawa masira ung cp ntn ??

100% bro.
kapag nagkamali ka pwede mo xa i-Flash mo ulit..

[mhonzy]

boss,iisa lng b lahat ng firmware ng corby 2. .?naiibabalik pa ba sa keypad ung qwerty?

[napsterkent]

100% Functioning..!!
Thanks Bro.!!

[jehpoy17]

Originally Posted by mhonzy

boss,iisa lng b lahat ng firmware ng corby 2. .?naiibabalik pa ba sa keypad ung qwerty?

Hindi po iba-iba ang klase ng firmware..
may asian, arabic euro..
yan po nasa tutorial ko Arabic pero pwede mo xang gawin english

Originally Posted by napsterkent

100% Functioning..!!
Thanks Bro.!!

No problem..

[walalng021]

ts bat serial port error po?

[jehpoy17]

Originally Posted by walalng021

ts bat serial port error po?

naka install na po ba yung Samsung Kies?
then Off mo po yung Cp mo..
Hold Volume down + Dial + Power button then sasakmo na po yung usb cord to cpu

[walalng021]

try ko po ulet wait po