Samsung Galaxy Nexus
Quad-band GSM; penta-band 3G support
HSDPA 21Mbps; HSUPA 5.76Mbps
Android 4.0 Ice Cream Sandwich OS with stock UI
4.65” Super AMOLED capacitive touchscreen with HD (720 x 1280 pixels) resolution; 16M colors; oleophobic surface
Slim profile at 8.9mm
Dual-core 1.2GHz Cortex-A9 CPU; PowerVR SGX540 GPU; TI OMAP 4460 chipset
16/32GB built-in storage; 1GB RAM
5 MP camera (2592x1936 pixels) with autofocus, LED flash; 1.3MP front-facing unit
1080p video recording @30fps; touch-to-zoom while recording
Wi-Fi 802.11 a/b/g/n
DLNA; Wi-Fi hotspot
Bluetooth 3.0 with ADP
Charging MHL microUSB port with TV-out (1080p) support
GPS receiver with A-GPS support
Accelerometer, gyro and proximity sensors; compass; barometer
Back cover made of Hyper Skin material for increased grip
Excellent audio quality
Let's Get it on
note: apply this at your own risk
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do if you want to flash a custom Rom is to install the fastboot drivers. These are needed so that you can unlock your bootloader and flash CWM (ClockworkMod) Recovery to your phone.
a. The easiest ones to use are PdaNet for Android, download and run the [Link available to registered users only. Click here to register.] or [Link available to registered users only. Click here to register.]and follow the instructions to install (selecting Samsung as your device manufacturer if asked).
You can remove pdanet for Android from your phone and pc at a later time without removing the drivers.
b. After the drivers have been installed disconnect the usb cable and shut down your phone. Keep holding the 'Volume Up' and 'Volume Down' buttons and press the 'Power' button to boot the phone into FastBoot Mode.
c. Goto your Control Panel on your PC and open the Device Manager. You want this open so you can see the FastBoot driver is installed or so you can install it manually.
d. Connect the usb cable. In the Device Manager a new item called 'Android 1.0' should pop up and then the driver should install automatically. Once it is installed you will have a new section in the Device Manager called Android Phone without an "!" meaning its installed correctly.
Note 1: If the driver doesnt install automatically then double click on the Android 1.0 item, then click on the driver tab and select 'update driver'. Select 'browse my computer' and then 'Let me pick from a list'. If no items appear in the list then untick 'Show compatible hardware' and find the Android adb driver or Samsung adb driver.
Note 2: If you are still having problems setting up the fastboot drivers then have a read of [Link available to registered users only. Click here to register.]guide which may help you.
If may tanong kayo paano mag unlock ng bootloader,i-root at install ng custom rom at kernel kung di rin ako busy pwede ko kayo tulungan..
eto screenshot ko: