[TUT] Share MID 2330 7in China Tablet Disassembly - Firmware available

[lollipop.core]

ayaw maburn s SD card. anu kya prob?

[vheirsky]

[Link available to registered users only. Click here to register.]

ayaw maburn s SD card. anu kya prob?

HAYON buti may nag update ganyan din ang prob ko ngayon mga ka SB anu kaya ang prob diyan.. kahapon pa ako paulit uit ganyan parin ang error.

[rexelens]

pwede bang ma upgrade ang android china apad 1.6 version?

[vheirsky]

Ganyan din ang error ko.. pa tulong naman sa mga nakapag try

[Link available to registered users only. Click here to register.]

[lollipop.core]

Gumagawa palang po ako ng tutorial ^_^

download nio po muna ung firmware... nsa first post po.. galing kay sir biannie
[Link available to registered users only. Click here to register.]

Extract,

goto folder extracted...>production > PhoenixCard

insert your SD Card s computer.. gamit kau ng mem reader

TAKE NOTE... MAFOFORMAT ANG LAMAN NG SD CARD NIO KYA GAMIT KAU NG SD CARD NA WALANG LAMAN O KUNG GUSTO MO.. YAN N LNG.. basta backup ka lng..

tpos pag detected na.. .. open nio ung PhoenixCard na application.. ung may blue folder na icon...

click DiskCheck sa phoenixcard... tpos iselect ang LETTER NG MEMORY CARD NIO..

kunwari.,. nsa K:\ ang memory card nio select k sa dropdown list...

tpos nun.. click IMAGE FILE.... select nio ung "Share 2330.img"

then click BURN

pag natpos na ung burning.. i-eject ni si SD Card

tpos.. insert nio si SD Card sa tablet

tpos boot..

ang pag boot kay tablet.. unang boot ay.. press hold kay power button at volume up...


wag bitawan hangat ndi nagboboot...

Kapag naman ayaw un..

instead ung volume up.. ung down gamitin natin..
so hold power button, and volume down.. ^_^

feed back lng po ^_^

eto lumabas nung nag-boot:

sprite update error: fail to get environment
sprite update erroor: current card sprite failed
now hold the machine

anu po gagawin pg gnito?

[lollipop.core]

HAYON buti may nag update ganyan din ang prob ko ngayon mga ka SB anu kaya ang prob diyan.. kahapon pa ako paulit uit ganyan parin ang error.

download mo to:

[Link available to registered users only. Click here to register.]

kaso ang problema, after ko ma-burn eto nman lumabas nung nag-boot:

sprite update error: fail to get environment
sprite update erroor: current card sprite failed
now hold the machine

bka my iba png way...

[fallen90]

download mo to:

[Link available to registered users only. Click here to register.]

kaso ang problema, after ko ma-burn eto nman lumabas nung nag-boot:

sprite update error: fail to get environment
sprite update erroor: current card sprite failed
now hold the machine

bka my iba png way...

Yah.,. may iba pa ngang way.. USB Connector... i-coconect mo ung tablet sa pc .. directa kang magflaflash... kaso ndi ko pa nagagawa.....

about sa Error dun sa burner.. bkit nung ako ndi nagerror?

try nio tong idownload itong version ng Phoenix Card

[Link available to registered users only. Click here to register.]

STEPS
1. Plug mo ung SD Card sa Reader
2. .. Extract ung 7z file, then open up the folder, execute PhoenixCard.exe
3. Click ""Disk Drive""
4. Click ""Image File""
5. sa Write Mode Section, Select ""PRODUCT MODE""
6. Burn
7. after that the image is burned to SD Card, pull out from the reader and insert SD Card into the tablet
8. Power on the tablet and, wait for 4-5 minutes, will automatically turn off
9. Remove the SD Card and power the tablet again.

same sa tut ko sa taas.. pero simplefied.. using a different version of PhoenixCard




Here's some info about PhoenixCard >> [Link available to registered users only. Click here to register.]

[fallen90]

pwede bang ma upgrade ang android china apad 1.6 version?

I dont think.. possible. pero meron po ata dito sa SB na firmware para jan.. ^_^

[rexelens]

I dont think.. possible. pero meron po ata dito sa SB na firmware para jan.. ^_^

yong kay n70 na thread ba tinutukoy mo? iba ata yon sir....

[fallen90]

yong kay n70 na thread ba tinutukoy mo? iba ata yon sir....

ndi ko po tanda kung sa kanya un.. wala po kc akong aPad eh.. ^_^ xenxa na..