[GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 update)

[vheryoness]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

mga sir may JB 4.3 na po ba?

sa mga nexus pa lang lumabas ang 4.3 sir.. antay na lang tyo.. mabilis lang magagawa ng mga cynogen master yun meron na agad sila

TAGUMPAY
sulit ang puyat salamat mga master

congrats sir

kakabili q lang kahapon hehe try q after 3 days mag upgrade sayang din baka magdeperensya covered pa sya nung replacement hahaha sa firmware upgrade madali lang sya nakita q sa video ahm tanung lang stable na po ba ito; 4.2.2 0523 http://d-h.st/zpp???? fixed na ba or ung older padin ang mas better???

para sakin 428 pa din sir.. takaw sa bat ng 4.2.2

 

[ralkap]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

na update ko firmware ko sa 4.1.1 ainol novo 7 ngayon gusto ko update sa 4.2.2 kaso ayaw ma detect ng urgrade tool, ano ba dapat kung gawin?

 

[jerhom]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

na update ko firmware ko sa 4.1.1 ainol novo 7 ngayon gusto ko update sa 4.2.2 kaso ayaw ma detect ng urgrade tool, ano ba dapat kung gawin?

irename mo lang yung folder tanggalin ang chinese character

 

[Soloist]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

opps pamarka muna ako ts

 

[robin5566]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

sir ndi ko po maxdo ma gets to. meron po ako fusion bolt kaka bili ko lng po. mag 1week na sakin. pra saan po ba to. pra kapag nsira ba ung fusion bolt pde pa maayos?

sir pkipliwanag po sakin, mraming salamt po..

more power.. godbless all.

 

[robin5566]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

sana mgawa ko.. goodluck sakin tomorrow..
bahala na c ako. heheh!! godbless al..

salamat dito..

 

[pointblank0617]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

Kung gusto nyo ng fast, stable at smooth performance ng CM Fubo nyo try nyo ang best ROM na ginawa ni xuantunt ng Vietnam saka rooted na sya...Install nyo lang using CWM...

Novo 7 Venus v5.5-vn build 4.1.1...http://goo.gl/tdDqs7

Novo 7 Venus v6-vn build 4.1.1...http://goo.gl/CGQuw0

pero gamit q now yung v6 the fastest rom ever...

wag nyo install ang v6 build 4.2.2 matakaw sa battery

sir salamat po d2, matanong ko lng, wla na ba i-wipe pa d2 bago install, like sa android na cellphone.. direcho install na lng ba toh?

 

[anjolino31]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

mga sir pwede ko ba i-downgrade sa 428 ung fubo ko?,523 kasi cya ngayon..

 

[pointblank0617]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

pede po yta same process din i think, w8 mo lng din feedback ng mga master natin d2

 

[vheryoness]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

mga sir pwede ko ba i-downgrade sa 428 ung fubo ko?,523 kasi cya ngayon..

same process lang sir.. flash mo lang sa 0428

 

[lee1022]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

sir salamat po d2, matanong ko lng, wla na ba i-wipe pa d2 bago install, like sa android na cellphone.. direcho install na lng ba toh?

no need na sir, automatic na lahat...

 

[lee1022]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

mga sir pwede ko ba i-downgrade sa 428 ung fubo ko?,523 kasi cya ngayon..

yes you can, just follow the same procedures...

 

[g081663]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

.tnx TS.... na ok na din... hehehe...

 

[stradivarius07]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

ahm ask lang poh about sa cmw recovery naka stock room pa ako na fubo ahmm kasi pag press q nung volume up at power button then release power botton may makikita kang ganito- reboot system now
- apply update from ADB
- wipe data/factory reset
- wipe cache partition
- apply update from sdcard:
ahm pwede na ba akong mag apply nung updates ng firmware na nadownload q by pressing apply updates from sd card? then locating the novo firmware or may iba pa akong ggawin haha sensya sa tanung bago lng ako sa android eh hehe

 

[stradivarius07]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

Installing ClockworkMod on the Novo 7 Venus (CM FUBO)
Requirements

Download the following files
CWM installation pack by Cloud Deter: http://goo.gl/jytt6E
ADB Drivers by cxz (needed to run the installation): http://goo.gl/fNs341

Installation

Extract both '[Ainol]-usb_driver_r07-windows_[cxz].zip' and 'CWM_Venus.zip' files somewhere.
Open '[Ainol]-usb_driver_r07-windows_[cxz]' up and open the 'usb_driver_ainol' folder. Double click on 'ainol_adb-delete_old_reg-values.bat' and let it run. If it doesn't work right-click on the file and choose 'Run as administrator'.
Next go back into the '[Ainol]-usb_driver_r07-windows_[cxz]' folder and double click on 'ainol2_VID2adbusbini.bat'. This will install the ADB drivers.
On your tablet open the Settings app. Scroll down to 'Development' and make sure it is turned on. Now on the right side look for 'USB Debugging' and make sure it's checked.
Plug your Venus tablet in to your computer using a microUSB cable.
Open the 'CWM_Venus' folder and double click on 'recovery_installer.bat'. This should install the recovery onto the tablet. Once the script is finished you can close the Command Prompt window.
Power off your tablet. Now to get into the recovery press and hold the VOLUME MINUS (-) button and the POWER button together. Wait until the very first Ainol boot logo appears and let go of the POWER button but keep holding the VOLUME MINUS button. After a bit you should be in the recovery.

Credits to Cloud Deter of ZZKKO Forum for this guide...

ahm kelangan q pa po bang gawin ito?? or deretso q na ung pag update ng firmware pag andito na ako sa part na ito (apply update from sdcard) pasagot naman please di kasi uso ang ganito sa s60 version2 na nokia hahaha

 

[lee1022]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

ahm ask lang poh about sa cmw recovery naka stock room pa ako na fubo ahmm kasi pag press q nung volume up at power button then release power botton may makikita kang ganito- reboot system now
- apply update from ADB
- wipe data/factory reset
- wipe cache partition
- apply update from sdcard:
ahm pwede na ba akong mag apply nung updates ng firmware na nadownload q by pressing apply updates from sd card? then locating the novo firmware or may iba pa akong ggawin haha sensya sa tanung bago lng ako sa android eh hehe

hindi sir kelangan mo pa mag flashed ng CWM... eto kopyahin mo sa external sd card CWM 6.0.3.3 for Novo 7 venus (CM FUBO)...http://goo.gl/ZhClSr

Once na nainstall mo na yan pde kna mag flashed ng khit anu firmware versions...eto lahat ng versions...http://goo.gl/RcCx7M (For Novo 7 Venus-CM FUBO)


Credits to thehero9x for compiliing all the firmware versions

 

[lee1022]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

ahm kelangan q pa po bang gawin ito?? or deretso q na ung pag update ng firmware pag andito na ako sa part na ito (apply update from sdcard) pasagot naman please di kasi uso ang ganito sa s60 version2 na nokia hahaha

Yun na lang CWM 6.0.3.3 ang iflashed mo wag na yan kasi luma na din yan CWM 6.0.3.1 yan mas maganda CWM 6.0.3.3 yan na ang latest...

 

[stradivarius07]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

ayun na install q na sir ung cmw thankyou!downloading na ako ng firmware update sana naman gumana ma update q sya successfully hehe

 

[panor]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

hello! need help here, bakit po hindi mabasa yung Firmware 4.2.2 0523 nung firmware tool? ano po ba kelangan gawin? hope someone can help.. ty

 

[stradivarius07]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (New Update)

Yun na lang CWM 6.0.3.3 ang iflashed mo wag na yan kasi luma na din yan CWM 6.0.3.1 yan mas maganda CWM 6.0.3.3 yan na ang latest...

bakit po palaging instalation aborted sakin?? huhu nainstall q nman ung cmw files na ibinigay mu sir.