Requirements:
GUIDE: (Assuming you already downloaded the needed software and files above)
Reason why I posted this?
I will edit this post for updates if needed.
Again, credits to the original owners of the flash tool.
- Computer
- LGUp Version 1.16.3 (Link here) (Credits to Surgemanxx from XDA Forums for sharing his fixed installer, credits also to the original provider of the file.)
- KDZ Firmware (Link here) (Search the correct firmware by typing your phone's IMEI)
- USB cable (Must be a stable one, any disconnection during flashing process will definitely brick your phone)
- Your phone (LG Wing)
- BACK UP YOUR PHONE!
I ONLY TRIED THIS ON LM-F100TMW AND LM-F100VMW VARIANT OF LG WING.
BE VERY CAREFUL WHEN FLASHING YOUR PHONE!
I WILL NOT TAKE ANY RESPONSIBILITY IF YOU GET A BRICKED PHONE UNDER ANY CIRCUMSTANCES.
IF YOU DECIDED TO FLASH YOUR PHONE, ITS ON YOU!
YOU HAVE BEEN WARNED.
BE VERY CAREFUL WHEN FLASHING YOUR PHONE!
I WILL NOT TAKE ANY RESPONSIBILITY IF YOU GET A BRICKED PHONE UNDER ANY CIRCUMSTANCES.
IF YOU DECIDED TO FLASH YOUR PHONE, ITS ON YOU!
YOU HAVE BEEN WARNED.
GUIDE: (Assuming you already downloaded the needed software and files above)
- Again back up your phone first!
- Install the LGUp, follow the instructions shown on the installer and do install the drivers needed!
- Boot your phone to download mode by connecting your phone to your pc using your original/stable usb cable, restarting your phone, and holding down the volume up button while booting.
- If your phone is now in download mode, proceed to the next step. If not, repeat step 3.
- Open the LGUp Patched shortcut on your desktop. It should automatically detect your phone upon launching.
(If not and you see the following picture below, repeat step 3.)
(If problem persist, your cable and or usb port might be the problem.) - Pick the refurbished option (VERY IMPORTANT!)
- Browse or click the ellipse button for KDZ file.
- Choose the kdz file you downloaded from LGROM.
- Please check the following picture below:
(If your LGUp is similar to the picture above, you can proceed to the next step)
(*Note: KDZ file name may differ depending on your phone variant.*) - Click 'Start'.
WARNING: DO NOT REMOVE/DISCONNECT/TURN OFF YOUR PHONE AND OR COMPUTER DURING THE FLASHING PROCESS! DOING SO WILL DEFINITELY BRICK YOUR PHONE! - Relax and wait for the flashing process to finish. Your phone should boot up automatically.
- Profit?
Reason why I posted this?
- Said variant doesn't get any updates via OTA or Software Update in settings.
- Some of the said variant can be purchased with Android 10 and or 11.
(Some do get problems installing some applications that needed at least android 12 or up)
I will edit this post for updates if needed.
Again, credits to the original owners of the flash tool.
Last edited: