How to create macOS Ventura 13.0 Bootable USB drive on Windows

[roguezero]

macOS 14, a.k.a. Ventura was released in October 2022. It brought new features to Macs including iCloud Shared Photo Library, Continuity Camera (which allows an iPhone running iOS 16 to be used as a webcam), unsend for emails, ability to edit sent Messages and more.

Ventura was replaced by Sonoma in September 2023, and has now been replaced by macOS Sequoia which arrived in September 2024. Despite this, the development of macOS 14 Ventura will continue with security updates issued when necessary.

In this article you can find the information about the latest version of Ventura, and why you should install the updates Apple issues to Ventura if you can’t upgrade to Sonoma or Sequoia.

macOS Ventura: Compatibility​

The following Macs are supported by macOS Ventura:

• MacBook models from 2017 or later
• MacBook Air models from 2018 or later
• MacBook Pro models from 2017 or later
• Mac mini models from 2018 or later
• iMac models from 2017 or later
• iMac Pro (all models)
• Mac Pro models from 2019 or later
• Mac Studio (all models)

This means the following Macs, which were supported by Monterey, have now fallen off the list:

• iMac (models from 2015)
• MacBook Air (models from 2015 and 2017 models)
• MacBook Pro (2015 and 2016 models)
• Mac mini (2014 models)
• Mac Pro (2013 model – cylinder/trash can)
• MacBook (2016 model)

Kung mayroon kang Apple computer o laptop at bigla itong tumigil sa paggana sa anumang kadahilanan at wala kang ibang paraan ng paggawa ng Bootable USB drive para mabawi o muling mai-install ang OS maaari kang gumawa ng bootable usb drive mula sa isang windows computer.

Bibigyan ko kayo ng ilang madaling hakbang kung paano ka makakagawa ng bootable USB drive para sa mac OS mula sa isang windows computer.

1. USB Device:​

Kakailanganin mo ng USB dongle. Dapat na 16GB ang laki o mas mataas ang device. dapat ma-format to FAT32 bago ito gamitin. Kaya kapag handa nang gamitin ang USB drive, pupunta kami sa susunod na hakbang na mag-download ng DMG file.

Create a GPT partition on a USB flash drive​

Kung hindi gumagana ang USB flash drive sa TransMac, maaari pa rin itong maging problema sa partition. Sa kasong ito, maaaring kailanganin mong gawing muli ang buong proseso. Gayunpaman, sa pagkakataong ito, dapat mong sundin ang mga hakbang na ito upang magamit ang utility ng command-line ng Diskpart sa Windows 10 (o 11) upang lumikha ng naaangkop na partition ng GPT, at pagkatapos ay sundin ang mga tagubilin sa itaas.

To create a GPT partition on a removable drive, use these steps:

1. Open Start.
2. Search for Command Prompt, right-click the top result, and select the Run as an administrator option.
3. Type the following command and press Enter:
   diskpart
4. Type the following command to view all drives connected to your computer and press Enter:
   list disk
5. Type the following command with the number assigned for the USB flash drive and press Enter:
   select disk ( depende yan kung saan yung usb drive nyo, check nyo nalng yung size para hindi kayo magkamali)
   In the command, change to the number corresponding to the USB flash drive.
6. 
7. Type the following command to clean the drive and press Enter:
   clean
8. Type the following command to convert the drive to the GPT style and press Enter:
   convert gpt
9. Type the following command to create a primary partition and press Enter: create partition primary
   create partition primary

Once you have formatted the USB flash drive with a GPT partition,pwede mo nang gamitin ang TransMac application.

2. Creating Bootable USB:​

Magda-download kami ng software na tinatawag na 'TransMac. Mangyaring tingnan ang link sa ibaba upang i-download ang Software.

Download File:
TransMAc

Create macOS bootable USB installation media​

To create a bootable USB drive with macOS, use these steps:

1. Download and install TransMac on Windows.
Quick note: This is a paid piece of software, but it gives you a 15-day trial, which is more than enough time. (If this works and you want to support the developer, purchase the full version.)
2. Connect the USB flash drive.
Important: If you have any data on the flash drive, remember to back it up since this process will erase everything on it.
3. Install the TransMac app, Right-click the TransMac app and select the Run as administrator option.
4. After Run as administrator (If you use the trial version, wait 15 seconds.)

5.Right-click the USB flash drive and select the “Format Disk for Mac” option from the left pane.
Quick note: You want to perform this task before creating the bootable media because there is a good chance that the drive was formatted using a Windows device. If this is the case, the chances are it’s using an MBR partition, and the USB drive needs a GPT partition to work on a Mac.

6.Click the Yes button to format the drive on the warning message.

7.Confirm a name for the drive. For example, “macOS bootable USB.” and Click the OK button.

9.Click the Yes button and Click the OK button.
10.Right-click the USB flash drive and select the “Restore with Disk Image” option from the left pane.

11.Click the Yes button to confirm the deletion of the USB flash drive data.
12.Click the browse button on the right,Select the “.dmg” file with the macOS installation files.

13. Click the Open button.
14. Click the OK button.
15. Click the Yes button.
Once you complete the steps, insert the USB flash drive on your Mac to install, reinstall, or upgrade the operating system to the macOS.

3. Downloading DMG file:​

Pangalawang bagay na kailangan mo ay isang DMG file para sa OS. narito ang listahan ng DMG file na maaari mong i-download mula sa link na ibinigay sa ibaba.

Download DMG File:
MacOS Ventura

 

[gunther453]

di na accessible yung ventura link. Thank