- Messages
- 175
- Reaction score
- 0
- Points
- 26
Guys baka may idea kayo pano ma fix tong error na naencounter ko sa bm622i 2010 gamit wimax tool 3.0 habang nag sisimula ako mag snipe..win7 32bit..Ito po LOG nya Preparing to process command...
Change using RESTORE method
Trying to change MAC address...
Checking telnet log...
ERROR: on TELNET access / changing MAC Address....
Process aborted.... Please check your CONNECTION / MAC.
Live MAC found: 0
If you are USING ROUTER please REMOVE it and DIRECLY connect to WIMAX device.
Please Check TelnetOutPutCmnd.txt and TelnetInputCmnd.txt. And REPORT it to the author.
NAKA enable naman po telnet ko pati sa ACL..at direct via lan ako naka connect..
Salamat po sa makakatulong sakin..MORE POWER SYMBIANIZE..
Change using RESTORE method
Trying to change MAC address...
Checking telnet log...
ERROR: on TELNET access / changing MAC Address....
Process aborted.... Please check your CONNECTION / MAC.
Live MAC found: 0
If you are USING ROUTER please REMOVE it and DIRECLY connect to WIMAX device.
Please Check TelnetOutPutCmnd.txt and TelnetInputCmnd.txt. And REPORT it to the author.
NAKA enable naman po telnet ko pati sa ACL..at direct via lan ako naka connect..
Salamat po sa makakatulong sakin..MORE POWER SYMBIANIZE..