- Messages
- 181
- Reaction score
- 0
- Points
- 26
View attachment 185404
Hello Guys Ginawa ko po itong THREAD na ito para sa mga SKK MOBILE Users.
Hopefully na ito na yung maging Official Thread para sa SKK.
ROOTING SKK
Procedure:
1. Download and Install ADB Drivers to your PC.
http://adbdriver.com/downloads/
2. Download VRoot 1.7.0 to your PC. (Pag na-run na yung VRoot, maguupdate ito kusa into English Version 1.7.3.4863)
http://www.datafilehost.com/d/e2841c1a
3. Connect Your Device Using Connector. (Dapat ay naka USB Debug na yung Phone. Check it on Settings/Applications/Development/Check USB Debug)
4. Run ADB Drivers, Then Click Install. (Wait Hanggang sa Mainstall yung Driver, after mainstall yung Driver Click EXIT)
5. Run VRoot, (Pag na-run na yung VRoot, maguupdate ito kusa into English Version 1.7.3.4863. After maupdate, This will automatically reads your Phone.)
6. Antayin hanggang sa matapos ang pag-read sa phone nyo. After that, Click ROOT (Green Button)
7. Wait Hanggang sa matapos ang Rooting Process. After ng Rooting Process, Your Phone Will Reboot Automatically.
8. When it Opens, Check if KINGUSER is Installed, If installed YOUR PHONE NOW IS ROOTED !.
CHANGING KINGUSER APP to SUPERUSER APP (OPTIONAL)
This process is Optional. Kung sakasakaling Hindi ninyo type ang KINGUSER APP at Mas Gusto ninyo yung SUPERSU APP.
Procedure:
1. Download the SUPERSU 1.93. (Latest na Ito).
http://www24.zippyshare.com/v/50109945/file.html
2. Root Explorer and Link 2 SD is Needed. (Kung Wala pa po kayo, Just Follow the Links)
For Link 2 SD (Just Click The SKIP from the Upper Right Corner)
http://?????????/serve/?id=21455939196371
For Root Expolorer
http://kickass.to/root-explorer-file...-t8584320.html
3. Extract SuperUser to your SD Card.
4. Open Root Explorer, (Mount R/W). Goto system/app and Move Superuser.apk to your SD Card.
5. Install now the Extracted Superuser to your SD Card. (Superuser v1.93, yung Dinawnload)
6. After mainstall, STRICTLY DONT OPEN YET !. Just Click DONE.
7. Reboot Your Phone.
8. PagnagOpen na yung Phone, Check Your Installed Superuser kung may mag popop-up na SU BINARY NOT INSTALLED etc.. basta parang Ganun po. Pag ganun po ang nangyari Repeat The Procedure From the Beginning pero Install muna Ulet yung KINGUSER. Pero pag wala naman po nagpop-up na ganun SUCCESSFUL po yung pagpapalit natin. Tested na Po ito sa SKK A2 ko at sa CHERRY MOBILE ng Classmate Ko.
9. If Successful po yung Pagpapalit ng KINGUSER to SUPERUSER, pwede nyo na po Gawin itong SYSTEM App. Just Open Link 2 SD, Click and Hold the SUPERUSER and Click Convert to System App.
INSTALLING/FLASHING CLOCKWORKMOD
This is for All SPREADTRUM SKK PHONES.
Pano malalaman kung Spreadtrum Phone ang SKK natin ? Malalaman po natin ito When we Connect our Phone to PC, May magpopop-up po na message na FOUND NEW HARDWARE at sa ibaba nito ay Spreadtrum Phone. Kapag Hindi po Spreadtrum ang Phone ninyo ay Skip This Tutorial or Else baka MaBRICK ang Phone nyo. THIS IS FOR SPREADTRUM PHONES.
Note: Im not Responsible sa kung ano man ang mangyari sa Phone Nyo. Do It At Your OWN RISK !
Here Are All The Recoveries:
1) For SC6280 : http://is.gd/0PJXs0
2) For i9270+ : http://is.gd/fiFug2
3) For 5830, S5830, Q5830, Q206 & GT-N9300 : http://is.gd/3xLzZx
4) For S9300 Clone : http://is.gd/4WqA2Y
5) For Fieteng A7100 (May Work On Most Feiteng Devices) : http://is.gd/TpaHuD
6) For 6500-TV & S560 : http://is.gd/On1wnT
7) For N9300 (I9300 Clone) : http://is.gd/vNt0EC
8) For S930 & N8820 : http://is.gd/2j2fzQ
Note: You must Know the CPU Hardware of Your Phone. How ? Install MobileUncle Tools to your Phone.
For MobileUncle Tools
http://is.gd/SzWnZg
Paano malalaman ang CPU Hardware ng Phone mo
1. Install the MobileUncle Tools.
2. Click Device Info.
3. Hanapin ang Hardware.
PROCEDURE FOR FLASHING/INSTALLING CWM
1. Download the CWM that corresponds to your CPU Hardware.
2. Copy it to Your SD Card.
3. Extract the file, After that rename it into 'recovery.img' (Without the qoutes).
4. Open MobileUncle Tools.
5. Click The Recovery Update.
6. Kapag na click na, lalabas yung recovery.img.
7. Click the 'recovery.img', then follow the installation process or just simply click OK/YES.
8. Pagtapos mainstall ng MobileUncle Tools yung recovery.img, a message will pop-up to Reboot into Recovery, Click OK.
9. CWM is Now Installed to Your Phone, Pwede na po tayo Gumawa ng Back-Ups and Gumawa ng Custom Roms.
QUESTION: What if my Phone is Spreadtrum Phone, at wala sa Given na CWM Recoveries sa itaas yung para sa CPU Hardware ko ?
ANSWER: Kung wala po sa Given CWM Recoveries ang para sa CPU Hardware nyo, Try nyo lahat ng CWM Recoveries sa itaas, hanggang sa Makuha nyo yung Compatible, BUT NOTE: DO IT AT YOUR OWN RISK ! .
PROOF: I am now Using SKK A2, at ang CPU Hardware ko ay SP6820A, So I download the SC6820 kasi hindi naman sila gaano nagkakalayo Pero nung naiFLASH ko na, Hindi ito gumana, meaning to say hindi Compatible para sa CP ko yung SC6820. Akala ko mabi-BRICK phone ko kasi maling CWM na-install ko BUT ITS NOT, Gumana pa din phone ko kahit WALANG RECOVERY, kaya ti-nry ko yung ibang CWM Recoveries Hanggangsa Makita ko yung SWAK sa CP ko
As Far as I Know Wala Pa Akong Nakikitang NaBRICK ang Phone nila Dahil Dito
For SKK A2 - Use For 6500-TV & S560 : http://is.gd/On1wnT
For Others na nakagTRY na, POST NYO NALANG PO SANA KUNG WORKING PO BA SA INYO (With Phone Description and CWM Used), AT PARA MALAMAN DIN PO NG IBA KUNG ALING CWM RECOVERY ang MAAARI NILANG GAMITIN.
FLASHING/INSTALLING CWM USING FASTBOOT
Im not Sure, Pero parang sa Palagay ko po ay magagamit ito ng mga Na-Bricked yung Phone pero Wala pa Silang CWM na naka-Install.
Check It HERE
http://forum.gsmhosting.com/vbb/f781...1-5-a-1681898/
(Credits sa GSM Forum)
Spreadtrum SC6820/SC8810 Full Backup
Dito nalang Po
(Credits to XDA)
http://forum.xda-developers.com/show...php?p=39270468
STOCK ROM and CUSTOM ROMS
Para Po Mga Nakapag Back Up na ng Kanilang Rom, Kung maaari po sana ay Papost nalang po Dito Nang sa Gayon Ay matulungan natin ang ating Kapwa SKK Users na naBRICK yung Phone.
CREATING CUSTOM ROMS
As Far As I Know Wala pa pong Custom Roms sa SKK.
Actually Hindi po ako Marunong Gumawa ng CUSTOM ROMS Pero I will Share Pa Din yung Mga Nalalaman Ko Kung Pano natin ICOCUSTOMIZE yung PHONE natin. Sa Ganitong Paraan Para na rin tayong gumagawa ng CUSTOM ROMS, at pwede rin natin ito i-share DITO.
REQUIREMENTS:
PC COMPUTER
INTERNET CONNECTION (FOR SOME APPS)
WINDOWS 2000/XP/7/8 OR LINUX (ANY DISTRIBUTON)
ANDROID SDK
JAVA PLUGIN
JAVA SDK
7-ZIP ARCHIVER
ANDROID POWERED DEVICE
INSTALLED PROPER DEVICE USB DRIVERS
DEVICE USB DEBUGGING TURNED ON (Settings -> Developer Options -> USB Debugging)
FASTBOOT PACKAGE WITH GOOGLE USB DRIVER
NOTEPAD ++ (LINK) / OR LINUX EQUIVALENT
ADBD INSECURE INSTALLED ON YOUR DEVICE (FOR SOME APPS)
COMPARE TOOL (BEYOND COMPARE,VIRTUOUS TEN STUDIO) / OR LINUX EQUIVALENT(MELD)
CYGWIN(LINK)(OR JUST EXTRACT THIS PACKAGE)(FOR SOME APPS) - WINDOWS ONLY
VIRTUAL BOX(LINK)(FOR SOME APPS) - LINUX ONLY
ADOBE FLASH PLAYER
ADOBE AIR
SHOCKWAVE PLAYER
MSXML PARSER 6 (LINK) - WINDOWS ONLY
.NET FRAMEWORK(LINKS:V3/V4) - WINDOWS ONLY
SILVERLIGHT PLAYER (LINK) - WINDOWS ONLY
KLITE MEGA CODEC PACK / OR LINUX CODEC EQUIVALENT
Notes :
- All Softwares And Tutorials Are Made By Various Aurhors From XDA Developers Forum And Internet,So All Credits Are Going To Them.
- All Aplications Are Tested By Me And Working
- I'm Not Responsible For Any Eventual Errors And Misbehaving Of Yours Devices.
Refer na lang po kayo Dito http://en.miui.com/thread-5592-1-1.html
Anjan na lahat ng TOOLS na maaari nyong Magamit sa Pag-CUSTOM
HOPE NA MAKATULONG ITONG THREAD SA IBA, AND HOPING NA MAKAGAWA TAYO NG SARILI NATING CUSTOMS ROMS PARA NAMAN MAKASABAY PHONE NATIN SA USO hihi
HOPING FOR YOUR COOPERATIONS
(Credits to GSM and XDA and NheleDIO for Tutorials)
DL FILE link2sd v3.2,Root Explorer,apkeditor,apkeditor.apk files
https://www.mediafire.com/?cknc36663up0p88
[TUT] How to Make and Flash CWM RECOVERY on any .MediaTek MTK65xx Device
A rooted mtk65xx phone
mtk65xx Drivers
MtkDroidTools (latest preferred)
Original Rom
MTK MobileUncle Tools app (PlayStore)
MKT DROID TOOLS link http://dfiles.eu/files/fmnok7ke7
More tools at the end of post..
Hello, in this tutorial I will be showing you all how to make and flash cwm recovery in your mtk65xx phone. I will be using the CUBOT GT99 android. It's an mtk6589 and I got it from geekbuying.com.
All credits go to @jimymoto from http://www.movilesdualsim.com/foro/t...CWM-Cubot-GT99 for his great job.
Visit the forum for more about your Cubot gt99 including custom roms, tweaks, fixes, reviews..e.t.c
REMEMBER THAT FLASHING YOUR PHONE ALWAYS HAS RISKS AND I AM NOT RESPONSIBLE FOR ANYTHING THAT MAY HAPPEN TO YOUR DEVICE.
Okay, so first you will need to extract the boot.img from the stock rom of your phone.
View attachment 185414
Next, connect the phone with USB DEBUGGING ON to your PC. Open MTKDroid tools.
The program will recognize your device and it should list your device details. In case it doesn’t, open the ADB terminal in the program and write "adb devices" without the caps. If PC doesn't recognize any device, then you need to install the mtk drivers.
View attachment 185415
View attachment 185416
Open the root, backup, recovery tab and click on "To choose the boot.img file". Leave all the rest as they are. Then click on Recovery and Boot and select the boot.img we got earlier from the phone's Stock Rom.
View attachment 185417
A prompt will appear and there choose YES. A few seconds later, you will see task complete. Go back to the MTKdroidTools folder and you will see a new folder called recovery. Inside, you have two files. Take the one with the word recovery and place it in the root of your phone’s SD card (not in any folder).
From here on we work with the phone.
Open MobileUncle Tools and go to the Recovery Update. You should see the recovery you placed in your SD card. Select it and click on OK. Finally, choose reboot to Recovery. If all was done correctly, your phone should boot into your new cwm recovery.
View attachment 185418
You can now backup your stock rom and flash custom roms, patches, kernels and others without fear of bricking!!
I have done this procedure successfully on my Cubot gt99.
Cubot gt99 stock rom – http://blog.geekbuying.com/index.php...-flash-method/
Cubot gt99 cwm recovery (ready to flash) - https://mega.co.nz/#!LIIEkDhJ!aCSeGX...9Y1PAXDb-tbmyU
Mtk6589 drivers - http://vondroid.com/resources/mediat.../#.UfFrJW0lFYn
Cubot gt99 rooting tools (100% working) - http://vondroid.com/resources/univer.../#.UfFraW0lFYm
Hello Guys Ginawa ko po itong THREAD na ito para sa mga SKK MOBILE Users.
Hopefully na ito na yung maging Official Thread para sa SKK.
ROOTING SKK
Procedure:
1. Download and Install ADB Drivers to your PC.
http://adbdriver.com/downloads/
2. Download VRoot 1.7.0 to your PC. (Pag na-run na yung VRoot, maguupdate ito kusa into English Version 1.7.3.4863)
http://www.datafilehost.com/d/e2841c1a
3. Connect Your Device Using Connector. (Dapat ay naka USB Debug na yung Phone. Check it on Settings/Applications/Development/Check USB Debug)
4. Run ADB Drivers, Then Click Install. (Wait Hanggang sa Mainstall yung Driver, after mainstall yung Driver Click EXIT)
5. Run VRoot, (Pag na-run na yung VRoot, maguupdate ito kusa into English Version 1.7.3.4863. After maupdate, This will automatically reads your Phone.)
6. Antayin hanggang sa matapos ang pag-read sa phone nyo. After that, Click ROOT (Green Button)
7. Wait Hanggang sa matapos ang Rooting Process. After ng Rooting Process, Your Phone Will Reboot Automatically.
8. When it Opens, Check if KINGUSER is Installed, If installed YOUR PHONE NOW IS ROOTED !.
CHANGING KINGUSER APP to SUPERUSER APP (OPTIONAL)
This process is Optional. Kung sakasakaling Hindi ninyo type ang KINGUSER APP at Mas Gusto ninyo yung SUPERSU APP.
Procedure:
1. Download the SUPERSU 1.93. (Latest na Ito).
http://www24.zippyshare.com/v/50109945/file.html
2. Root Explorer and Link 2 SD is Needed. (Kung Wala pa po kayo, Just Follow the Links)
For Link 2 SD (Just Click The SKIP from the Upper Right Corner)
http://?????????/serve/?id=21455939196371
For Root Expolorer
http://kickass.to/root-explorer-file...-t8584320.html
3. Extract SuperUser to your SD Card.
4. Open Root Explorer, (Mount R/W). Goto system/app and Move Superuser.apk to your SD Card.
5. Install now the Extracted Superuser to your SD Card. (Superuser v1.93, yung Dinawnload)
6. After mainstall, STRICTLY DONT OPEN YET !. Just Click DONE.
7. Reboot Your Phone.
8. PagnagOpen na yung Phone, Check Your Installed Superuser kung may mag popop-up na SU BINARY NOT INSTALLED etc.. basta parang Ganun po. Pag ganun po ang nangyari Repeat The Procedure From the Beginning pero Install muna Ulet yung KINGUSER. Pero pag wala naman po nagpop-up na ganun SUCCESSFUL po yung pagpapalit natin. Tested na Po ito sa SKK A2 ko at sa CHERRY MOBILE ng Classmate Ko.
9. If Successful po yung Pagpapalit ng KINGUSER to SUPERUSER, pwede nyo na po Gawin itong SYSTEM App. Just Open Link 2 SD, Click and Hold the SUPERUSER and Click Convert to System App.
INSTALLING/FLASHING CLOCKWORKMOD
This is for All SPREADTRUM SKK PHONES.
Pano malalaman kung Spreadtrum Phone ang SKK natin ? Malalaman po natin ito When we Connect our Phone to PC, May magpopop-up po na message na FOUND NEW HARDWARE at sa ibaba nito ay Spreadtrum Phone. Kapag Hindi po Spreadtrum ang Phone ninyo ay Skip This Tutorial or Else baka MaBRICK ang Phone nyo. THIS IS FOR SPREADTRUM PHONES.
Note: Im not Responsible sa kung ano man ang mangyari sa Phone Nyo. Do It At Your OWN RISK !
Here Are All The Recoveries:
1) For SC6280 : http://is.gd/0PJXs0
2) For i9270+ : http://is.gd/fiFug2
3) For 5830, S5830, Q5830, Q206 & GT-N9300 : http://is.gd/3xLzZx
4) For S9300 Clone : http://is.gd/4WqA2Y
5) For Fieteng A7100 (May Work On Most Feiteng Devices) : http://is.gd/TpaHuD
6) For 6500-TV & S560 : http://is.gd/On1wnT
7) For N9300 (I9300 Clone) : http://is.gd/vNt0EC
8) For S930 & N8820 : http://is.gd/2j2fzQ
Note: You must Know the CPU Hardware of Your Phone. How ? Install MobileUncle Tools to your Phone.
For MobileUncle Tools
http://is.gd/SzWnZg
Paano malalaman ang CPU Hardware ng Phone mo
1. Install the MobileUncle Tools.
2. Click Device Info.
3. Hanapin ang Hardware.
PROCEDURE FOR FLASHING/INSTALLING CWM
1. Download the CWM that corresponds to your CPU Hardware.
2. Copy it to Your SD Card.
3. Extract the file, After that rename it into 'recovery.img' (Without the qoutes).
4. Open MobileUncle Tools.
5. Click The Recovery Update.
6. Kapag na click na, lalabas yung recovery.img.
7. Click the 'recovery.img', then follow the installation process or just simply click OK/YES.
8. Pagtapos mainstall ng MobileUncle Tools yung recovery.img, a message will pop-up to Reboot into Recovery, Click OK.
9. CWM is Now Installed to Your Phone, Pwede na po tayo Gumawa ng Back-Ups and Gumawa ng Custom Roms.
QUESTION: What if my Phone is Spreadtrum Phone, at wala sa Given na CWM Recoveries sa itaas yung para sa CPU Hardware ko ?
ANSWER: Kung wala po sa Given CWM Recoveries ang para sa CPU Hardware nyo, Try nyo lahat ng CWM Recoveries sa itaas, hanggang sa Makuha nyo yung Compatible, BUT NOTE: DO IT AT YOUR OWN RISK ! .
PROOF: I am now Using SKK A2, at ang CPU Hardware ko ay SP6820A, So I download the SC6820 kasi hindi naman sila gaano nagkakalayo Pero nung naiFLASH ko na, Hindi ito gumana, meaning to say hindi Compatible para sa CP ko yung SC6820. Akala ko mabi-BRICK phone ko kasi maling CWM na-install ko BUT ITS NOT, Gumana pa din phone ko kahit WALANG RECOVERY, kaya ti-nry ko yung ibang CWM Recoveries Hanggangsa Makita ko yung SWAK sa CP ko
As Far as I Know Wala Pa Akong Nakikitang NaBRICK ang Phone nila Dahil Dito
For SKK A2 - Use For 6500-TV & S560 : http://is.gd/On1wnT
For Others na nakagTRY na, POST NYO NALANG PO SANA KUNG WORKING PO BA SA INYO (With Phone Description and CWM Used), AT PARA MALAMAN DIN PO NG IBA KUNG ALING CWM RECOVERY ang MAAARI NILANG GAMITIN.
FLASHING/INSTALLING CWM USING FASTBOOT
Im not Sure, Pero parang sa Palagay ko po ay magagamit ito ng mga Na-Bricked yung Phone pero Wala pa Silang CWM na naka-Install.
Check It HERE
http://forum.gsmhosting.com/vbb/f781...1-5-a-1681898/
(Credits sa GSM Forum)
Spreadtrum SC6820/SC8810 Full Backup
Dito nalang Po
(Credits to XDA)
http://forum.xda-developers.com/show...php?p=39270468
STOCK ROM and CUSTOM ROMS
Para Po Mga Nakapag Back Up na ng Kanilang Rom, Kung maaari po sana ay Papost nalang po Dito Nang sa Gayon Ay matulungan natin ang ating Kapwa SKK Users na naBRICK yung Phone.
CREATING CUSTOM ROMS
As Far As I Know Wala pa pong Custom Roms sa SKK.
Actually Hindi po ako Marunong Gumawa ng CUSTOM ROMS Pero I will Share Pa Din yung Mga Nalalaman Ko Kung Pano natin ICOCUSTOMIZE yung PHONE natin. Sa Ganitong Paraan Para na rin tayong gumagawa ng CUSTOM ROMS, at pwede rin natin ito i-share DITO.
REQUIREMENTS:
PC COMPUTER
INTERNET CONNECTION (FOR SOME APPS)
WINDOWS 2000/XP/7/8 OR LINUX (ANY DISTRIBUTON)
ANDROID SDK
JAVA PLUGIN
JAVA SDK
7-ZIP ARCHIVER
ANDROID POWERED DEVICE
INSTALLED PROPER DEVICE USB DRIVERS
DEVICE USB DEBUGGING TURNED ON (Settings -> Developer Options -> USB Debugging)
FASTBOOT PACKAGE WITH GOOGLE USB DRIVER
NOTEPAD ++ (LINK) / OR LINUX EQUIVALENT
ADBD INSECURE INSTALLED ON YOUR DEVICE (FOR SOME APPS)
COMPARE TOOL (BEYOND COMPARE,VIRTUOUS TEN STUDIO) / OR LINUX EQUIVALENT(MELD)
CYGWIN(LINK)(OR JUST EXTRACT THIS PACKAGE)(FOR SOME APPS) - WINDOWS ONLY
VIRTUAL BOX(LINK)(FOR SOME APPS) - LINUX ONLY
ADOBE FLASH PLAYER
ADOBE AIR
SHOCKWAVE PLAYER
MSXML PARSER 6 (LINK) - WINDOWS ONLY
.NET FRAMEWORK(LINKS:V3/V4) - WINDOWS ONLY
SILVERLIGHT PLAYER (LINK) - WINDOWS ONLY
KLITE MEGA CODEC PACK / OR LINUX CODEC EQUIVALENT
Notes :
- All Softwares And Tutorials Are Made By Various Aurhors From XDA Developers Forum And Internet,So All Credits Are Going To Them.
- All Aplications Are Tested By Me And Working
- I'm Not Responsible For Any Eventual Errors And Misbehaving Of Yours Devices.
Refer na lang po kayo Dito http://en.miui.com/thread-5592-1-1.html
Anjan na lahat ng TOOLS na maaari nyong Magamit sa Pag-CUSTOM
HOPE NA MAKATULONG ITONG THREAD SA IBA, AND HOPING NA MAKAGAWA TAYO NG SARILI NATING CUSTOMS ROMS PARA NAMAN MAKASABAY PHONE NATIN SA USO hihi
HOPING FOR YOUR COOPERATIONS
(Credits to GSM and XDA and NheleDIO for Tutorials)
DL FILE link2sd v3.2,Root Explorer,apkeditor,apkeditor.apk files
https://www.mediafire.com/?cknc36663up0p88
[TUT] How to Make and Flash CWM RECOVERY on any .MediaTek MTK65xx Device
A rooted mtk65xx phone
mtk65xx Drivers
MtkDroidTools (latest preferred)
Original Rom
MTK MobileUncle Tools app (PlayStore)
MKT DROID TOOLS link http://dfiles.eu/files/fmnok7ke7
More tools at the end of post..
Hello, in this tutorial I will be showing you all how to make and flash cwm recovery in your mtk65xx phone. I will be using the CUBOT GT99 android. It's an mtk6589 and I got it from geekbuying.com.
All credits go to @jimymoto from http://www.movilesdualsim.com/foro/t...CWM-Cubot-GT99 for his great job.
Visit the forum for more about your Cubot gt99 including custom roms, tweaks, fixes, reviews..e.t.c
REMEMBER THAT FLASHING YOUR PHONE ALWAYS HAS RISKS AND I AM NOT RESPONSIBLE FOR ANYTHING THAT MAY HAPPEN TO YOUR DEVICE.
Okay, so first you will need to extract the boot.img from the stock rom of your phone.
View attachment 185414
Next, connect the phone with USB DEBUGGING ON to your PC. Open MTKDroid tools.
The program will recognize your device and it should list your device details. In case it doesn’t, open the ADB terminal in the program and write "adb devices" without the caps. If PC doesn't recognize any device, then you need to install the mtk drivers.
View attachment 185415
View attachment 185416
Open the root, backup, recovery tab and click on "To choose the boot.img file". Leave all the rest as they are. Then click on Recovery and Boot and select the boot.img we got earlier from the phone's Stock Rom.
View attachment 185417
A prompt will appear and there choose YES. A few seconds later, you will see task complete. Go back to the MTKdroidTools folder and you will see a new folder called recovery. Inside, you have two files. Take the one with the word recovery and place it in the root of your phone’s SD card (not in any folder).
From here on we work with the phone.
Open MobileUncle Tools and go to the Recovery Update. You should see the recovery you placed in your SD card. Select it and click on OK. Finally, choose reboot to Recovery. If all was done correctly, your phone should boot into your new cwm recovery.
View attachment 185418
You can now backup your stock rom and flash custom roms, patches, kernels and others without fear of bricking!!
I have done this procedure successfully on my Cubot gt99.
Cubot gt99 stock rom – http://blog.geekbuying.com/index.php...-flash-method/
Cubot gt99 cwm recovery (ready to flash) - https://mega.co.nz/#!LIIEkDhJ!aCSeGX...9Y1PAXDb-tbmyU
Mtk6589 drivers - http://vondroid.com/resources/mediat.../#.UfFrJW0lFYn
Cubot gt99 rooting tools (100% working) - http://vondroid.com/resources/univer.../#.UfFraW0lFYm
Attachments
Last edited:
ito yung guide para sa mga MTK devices. 
so so sad.. sir anu sa palagay nyo magandang update gawin ko sa neo ko? pra nmn maiba,, 
