Blank Wan ba Wimax Nyo???

[jennrhanz05]

Ito na pinaka hihintay natin...,
Base lang to sa Idea ko at tulong ng Ibang Forum Sites at Specially kay sir "Jonathan"

How to make DIY LPT SPI Flasher na 100% sure na magwowork??

Here's The Diagram

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/SPIFlashProgrammer_zpsd59de428.jpg.html][/URL]



Pinalitan ko lahat ng value ng resistors nyan kac minsan di madedetect ung WAN_IC nyo pag gagamitan mo ng matataas na value ng resistors Parity Error ang Lalabas....,

" NOTE : Plz Compare This Diagram sa Taas..Sa Mga Nahihirapan dun sa Diagram, Ganito Ung Itsura Ng Mga NEEDED Electronic Parts Ng Nasa Above Diagram... "

Ito Ung Gamit ko ngaun 2.92 Volts ung Output..


If Meron kau BM625 same lang din huh gagawin natin






Ito Po Ung Ginawa ko Medyo Untidy lang Atleast Working to...,

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/Front_zpsc07aeacf.jpg.html][/URL]





[URL=http://s1363.photobucket.com/user/jennrhanz05/media/Test_zpsf1c56d1a.jpg.html][/URL]


Pag ready na ung DIY SPI Flasher Nyo..Its Time to Baklas ang inyong WAN_IC gamit ang Hot Air..,
NOTE: Ingat lang sa Pag gamit ng Hot Air baka Masunog ang WAN_IC


BM622i WAN_IC
[URL=http://s1363.photobucket.com/user/jennrhanz05/media/Huawei-bm622i_zpse4b34eee.jpg.html][/URL]
[URL=http://s1363.photobucket.com/user/jennrhanz05/media/chip_zps14e7b4af.png.html][/URL]

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/BM622i-05_zps7b057945.jpg.html][/URL]

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/4a17ae3a-ec13-4786-9d68-3335d93fb6bc_zps8916a852.jpg.html][/URL]

After Nyo Matanggal ung WAN_IC sa CPE Board nyo lagyan nyo nlang ng ganito ung WAN_IC nyo at ung CPE Board ng Modem para madali ang pag Baklas nyo pag MaBlank Wan kau Ulit

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/dip8_edit_zps6c81810e.jpg.html][/URL]

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/nochip_zpsfcfd5fcf.jpg.html][/URL]

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/dip8ic_edit_zpseb7b5289.jpg.html][/URL]

Pag Ok na ang Lahat at ready na ang DIY LPT Flasher mo at ung WAN_IC mo TIME TO FLASH Na Tau...
BM622i 2010 MAC then ito rin BM622i 2011 MAC at gamit ang Hex Workshop

Edit mo nlang d2 sa Offset nato 524282 Line 7FFFA ang MAC ng BM622i...Control + G ka nlang pra shorcut sa "Go to" then click mo ung Hex...jan mo makikita ang MAC ng BM622i 2010 at 2011

EXAMPLE lang to!!

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/Hex_zpsf9badcbc.jpg.html][/URL]



BM622 WAN_IC

Same Then Gawin Nyo..Lagyan Ng Socket IC Ang CPE Board Ng Modem At Ung WAN_IC

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/bm622_zps92524ce2.jpg.html][/URL]

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/bm622_wan_ic_zps7a293442.jpg.html][/URL]



Di Nyo Magagamit ang Hex Wokshop sa BM622 sa dahilang di mo Makikita ung MAC dun.. Download nyo nlang to and continue reading BM622 MAC ....



BM625 WAN_IC



Wla Pic ng BM625 Wan_Ic download nyo nlang to at reflash ur Ic
-->BM625 MAC



Download This Sofware For Reflashing Your WAN_IC


STEPS

1. copy mo sa C:\WINDOWS\system32 ang file na to -->> IOPERM.DLL

2. If windows XP ka run mo cmd
If windows 7 nman dapat run as Administrator mo

3. Type cd C:\Documents and Settings\jennrhanz\Desktop\SPIPGM

wag kalimutan ung " cd " sample ung sa taas magkaiba tau ng user..sakin kac jennrhanz PC ko at
sa desktop ko kac extract ung SPIPGM.zip na download ko pra madaling makita..=)
nasaloob na lahat ang kailangan mo...extract lang sa desktop.....

4. Type spipgmw
para makita lahat ng commands ng tool

5. Type spipgmw /i

to know if detected ung chip mo...,pag FFFF00FFh - parity error!
may mali sa connection mo...plz recheck at make sure talaga na tama ginawa mo baka masunog ung WAN_IC

6. Type spipgmw /u

To Unlock WAN_IC...
ONLY!!! connect PIN 3 to PIN 7 and 8 ng WAN_IC if needs Unlocking..,

7. Type spipgmw /e
to erase WAN_IC

8. Type spipgmw /r 0x0 240

para mlaman mo if naerase ang lahat ng nasa WAN_IC..dapat lahat ay " FF FF FF "

9. Type spipgmw /i

again to check if detected parin WAN_IC mo..
If detected....

10. Type spipgmw /p FileNaDownloadMo.bin

w8 hanggang matapos ang pagflash...wag galawin ang PC.. =)

11. Lastly Type spipgmw /v FileNaDownloadMo.bin

To verify if the same sa FileNaDownloadMo.bin at ang laman ng WAN_IC mo...
If 100% the same kabit mo na WAN_IC mo sa Modem
If may Error ...repeat steps above...,


Video Tut For WAN_IC Flashing or Download Video

Video Tut For LPT Flasher Making or Download Video


NOTE : Meaning ng FilenaDownloadMo.bin ay ung mga file na ito -- >

BM622i 2010 MAC
BM622i 2011 MAC
BM622 MAC
BM625 MAC


Dahil Sa Hirap or Wala Talagang Board Para sa IC To Ung Gawa ko.., Download Here =)


Ito Nman Gamit Kong Firmware Protection For My BM622.., credits sa nka discover ( dbug ) ..
View attachment 127271 View attachment 127371 View attachment 127372 View attachment 127373 View attachment 127374

My Modem =)
View attachment 127261

sample ito ung bios_ic ng Asus P5KPL ko na nka Locked
View attachment 127538

sample nman ito ng bios_ic ng Asus P5KPL ko na nka Unlocked
View attachment 127540


Sana Nakatulong sa Inyo.., =)

If you are doubting my work Don't Visit My Thread and Bragging Nonsense of My Work,,I am doing this to all of YOU who Blank_Waned their BM622 or BM622i to repair Your Modem The CHEAPEST WAY....

By The Way To all Haters Of My Thread,, I Am Not Like The Others Posting Nonsense In This SITE... This Help Thread is 100% Working,,, I Will never Post Anything That May Cause Damages Of Your Modem.

I Posted My Thread With Effort and Time,, Do Everything To Answer Your Questions..

Thank You And Respect My WORK!!

"Note: I Am Not Responsible For Any Further Damage Of Your Modem"
di huh ako nag rerepair at wla rin ako binibenta..,​

"Do Not Quote This Thread"​

 

[OmniBells]

Up to. ayos to sa mga gustong magbaklas.

 

[hacker101]

nice ts..ok lang ba kahit walang push to unlock button bro?

 

[stephenpaul]

nice sharing TS...UP dito!

 

[rybka]

ang galing naman

 

[Chainsmoker]

Two thumbs up sau!

 

[aswan0]

Nays WAN! Thanks dito...BM Muna..

 

[vanrion]

wow sa effort!..galing!

 

[jennrhanz05]

nice ts..ok lang ba kahit walang push to unlock button bro?

UU =)

need mo lang nman yan pag nkaLock ung WAN_IC mo..
Note: Only connect Pin 3 ng WAN_IC to Pin 7 and 8 of WAN_IC if NEEDS UNLOCKING lang poh...
para maiwasan ang pagkasunog ng WAN_IC mo...

 

[jumel07]

salamat dito ts .. magkano nagastos mo sa pagbuo ng flasher?

 

[InToY13]

Salamat po ts at sa mga tumolong sayu

 

[jennrhanz05]

salamat dito ts .. magkano nagastos mo sa pagbuo ng flasher?

Dito Sa Amin Area 124 poh lahat lahat

 

[jeff_jepjep]

Husay mo hro slamat dito kaso wala akong alam sa electronics....hehe

 

[jennrhanz05]

Husay mo hro slamat dito kaso wala akong alam sa electronics....hehe

Same tau sir.., Pero madali lang poh sundan ung Diagram..., Try nyo nlang poh 100% maa ayos nyo ung Modem nyo

 

[vnstan11]

sana my video tutorial na kasama para masundan nming mga newbie,,,medyo limited lang din kc knowledge ko sa electronics pero kya ko mag baklas ng wan ic

 

[jennrhanz05]

sana my video tutorial na kasama para masundan nming mga newbie,,,medyo limited lang din kc knowledge ko sa electronics pero kya ko mag baklas ng wan ic

Sir Video tutorial poh sa pag gawa ng DIY LPT Flasher or ung pag Flash poh ng WAN_IC??

 

[prossian0]

uu maganda din po yung video tutorial kasi medyu newbie plang sa electronics skills.. ehhhe.. pasensya na.. pero salamat nadin dito ts..

 

[jennrhanz05]

Try ko nlang poh make ng Video sa pagflash ng WAN_IC...pero ung pagMake poh ng DIY LPT Flasher medyo malabo un eh..pero ill try my Best siguro Next week.., saturday update ko to exam ko Bukas sa Major ko eh =)

 

[hydra323]

hayup sa effort~!
TS!

 

[lyotto23]

very nice ts