TIPS ON CAR PAINTING.. kahit anong tanong ukol sa pagpipintura ng car or motorcycle

[brujerizzm]

up po natin to mga ka SB

 

[mercado]

up po natin to mga ka SB

up naten sir,gusto ko pa matuto...

 

[Devilbiss2017]

Sino po ang mga nag d diy car painting na taga sanmateo,marikina,montalban,fairview?pm me gawa tau messenger share tayo idea at meet and greet din... Pm me

 

[earl3310]

Tanong lang po!
aano po the best na compressor gamit for Bigginers sa pag pipintora?
OK na po ba ang Vespa 1/4 na Compressor?

at Spray gun na na maganda din. .

salamat po sa sagot!

 

[Devilbiss2017]

boss kung may budget ka konti,1hp mo na konti lang difference ... aku beginers din,binili ko 1hp na.kasi yung dati hinihiram ko 1/4 hp lang.kinakapos eh humihina buga sa spray gun. sa spray gun naman boss maganda yung nakakalas yung buong harap nya,tip para madali malinis sa loob. gravity type boss ang kunin mo.and kuha ka na din ng guage para tama pressure sa spray gun.

 

[Devilbiss2017]

Guys pm me for the group in fb regarding motorcycle and automotive painting... thanks

 

[Devilbiss2017]

add me on facebook para po sa mga painter ng motorcycle and automotive Spray Painting pinas... thanks

 

[kagawkobai]

ano po bah tamang mixing ng epoxy primer sa thinner ? or epoxy enamel? TIA

 

[BrandX666]

SA MGA GUSTONG MAGTANONG UKOL SA CAR, MOTORCYCLE and HOUSE PAINTING

KAHIT ANONG TANONG WILL ENTERTAIN.

TIPS, PROCESS AND CAR PAINT MAINTENANCE

SOLO_BARIC IS AN EXPERIENCED CAR PAINTER, 8 YEARS IN THE INDUSTRY AND WILLING TO SHARE MY SKILLS TO OTHERS.

http://thumb18.webshots.net/s/thumb1/8/25/2/162282502RmBCwc_th.jpg

Boss anong magandang pang pintura sa tambutsu ng motor

 

[hacknslasher]

Mga boss, magkano po aabuting kung pare-paint ko yung kotse (Chevrolet Sonic)? Marami na kasing gasgas at may yupi na rin.

 

[whaha22]

patambay dito mga sirs

 

[etoma]

hi TS. gusto ko sana mag repaint ng acoustic guitar ko. Hingi po sana ako ng advise for the basic steps (hoping for step by step) and needed materials. Also, any recommendation for paint to use. Thanks in advance. More power!

 

[ako si james]

Sir ask ko lng kung tama ba proc ko repaint ko kasi kaha ng motor ko

Wet sand 800grit

Primer tas wet sand 1000 tas primer ulit..

Base coat then wet sand ulit 1000 tas base ulit then top coat....cthanks sir...

 

[Devilbiss2017]

Prep m muna grit 280,then prime,
Then 400 and 600. Then base coat.theb sand it with 800-1000 then topcoat.
Hope that helps.if mali let us know.thanks

 

[ryanbang78]

Nice tread Boss

 

[frezkel0706]

Sir ano po magandang rubbing compound?

 

[Lierina]

TS want ko repaint ng car hood,roof my mga puti puti na kasi eh ano bang need.?salamat.

 

[mercado]

TS want ko repaint ng car hood,roof my mga puti puti na kasi eh ano bang need.?salamat.

sir bago lang ako sa pagpipintura..may experience ako nian..yung topcoat pumuputi puti..pero ok pa naman yung base nia..ginawa ko niliha ko nga 1000-1200,tpos topcoat...

- - - Updated - - -

Prep m muna grit 280,then prime,
Then 400 and 600. Then base coat.theb sand it with 800-1000 then topcoat.
Hope that helps.if mali let us know.thanks

ganyan dn ang proseso ko sa pagpipinta sir...salamat

- - - Updated - - -

sir bago lang ako sa pagpipintura..may experience ako nian..yung topcoat pumuputi puti..pero ok pa naman yung base nia..ginawa ko niliha ko nga 1000-1200,tpos topcoat...

- - - Updated - - -

View attachment 338150

ganyan dn ang proseso ko sa pagpipinta sir...salamat

View attachment 338150
gawa ko beginner

 

[foodnotbomb]

Prep m muna grit 280,then prime,
Then 400 and 600. Then base coat.theb sand it with 800-1000 then topcoat.
Hope that helps.if mali let us know.thanks

280 sa prep, mag kaka sugat ng malalim ung panel,600 grit is the ideal grit then prime and sand it with 800 with light presure.
apply base coat with 15mins flash off in each coat. 3 coats is the ideal coat dependi sa coverage ng paint. allow to dry atleast an hour, you dont wanna sand it kc mag sasayang ka lang ng materials. after an hour pwedi na i tack rag and spray na ung clear

 

[mercado]

280 sa prep, mag kaka sugat ng malalim ung panel,600 grit is the ideal grit then prime and sand it with 800 with light presure.
apply base coat with 15mins flash off in each coat. 3 coats is the ideal coat dependi sa coverage ng paint. allow to dry atleast an hour, you dont wanna sand it kc mag sasayang ka lang ng materials. after an hour pwedi na i tack rag and spray na ung clear

sir anung tawag jay sa kulay ng corolla...paano yung mixing...