this procedure is for admin access globe firmware but other special function such as APN seting SMS FTP etc etc are not accessible may because of the config file we have use or globe firmware was intentionally blocked or hide it..
before we start make sure your modem is in USB mode this means green light steady else search other thread on how to put your modem in usb mode..
usb mode
open any AT terminal you prefer
type this command
at^datalock="
your_code_here"
at^sfm=1 <== this will set your modem to factory mode
then
AT^reset <== this will reset your modem wait lang mag steady power light only
now manual IP mo Ethernet mo
192.168.1.1
now run the config updater already posted ko na yan hanapin nyo na lang
after a successfull updating ng config
go to telnet and type again
at^sfm=0 <=== this command will kick your modem out to factory mode
AT^reset <== obvious naman na alam na natin kung para saan to
after that wait for your modem to reboot to normal mode
after reboot login as
ADMIN:ADMIN
then go to setting
click restore default
after mag reboot ng modem for the second time try logging in again as admin
all done...
PS:
ginawa ko lahat yang procedure na yan sa tatlong modem at naka salpak ang sim..
at dahil sinsitibong command yan mga yan i am not responsible kung ano man mangyare sa modem nyo
do this at your own risk..
PS:2
flashing project is still on going pa rin
open ang thread ko para sa mga basher