- Messages
- 7
- Reaction score
- 0
- Points
- 16
Hello to all
I'm new to the forum and hope to post in the right section
I have a problem with my B315s-22 router
Indeed, the router was under version 21.318.01.00.334
I wanted to downshift it so I could then desimlock it but it never worked because you had to uplaoder the usblsafe-b315.bin file for the router to go into download mode but it never worked.
The usblsafe-b315.bin file is successfully uploaded via Balong USB Downloader but the router still remains in 3G PC UI INTERFACE mode instead of having two new ports added to the file manager: 3G PC UI INTERFACE AND (HUAWEI Mobile Connect - DownLoad port or HUAWEI Mobile Connect - 3G Application Interface).
Now it only starts on 3G PC UI INTERFACE mode without me even needing to do a jumper.
Even when I hold the power button and reset button it always returns to 3G PC UI INTERFACE mode.
I think the file usblsafe-b315.bin although it is successfully uploaded does not work.
Would there be another way to toggle the router to have both 3G PC ports UI INTERFACE AND HUAWEI Mobile Connect - DownLoad port so I could flash the firmware and then desimlock it?
I am available for further information I am available for further information.
I'm new to the forum and hope to post in the right section
I have a problem with my B315s-22 router
Indeed, the router was under version 21.318.01.00.334
I wanted to downshift it so I could then desimlock it but it never worked because you had to uplaoder the usblsafe-b315.bin file for the router to go into download mode but it never worked.
The usblsafe-b315.bin file is successfully uploaded via Balong USB Downloader but the router still remains in 3G PC UI INTERFACE mode instead of having two new ports added to the file manager: 3G PC UI INTERFACE AND (HUAWEI Mobile Connect - DownLoad port or HUAWEI Mobile Connect - 3G Application Interface).
Now it only starts on 3G PC UI INTERFACE mode without me even needing to do a jumper.
Even when I hold the power button and reset button it always returns to 3G PC UI INTERFACE mode.
I think the file usblsafe-b315.bin although it is successfully uploaded does not work.
Would there be another way to toggle the router to have both 3G PC ports UI INTERFACE AND HUAWEI Mobile Connect - DownLoad port so I could flash the firmware and then desimlock it?
I am available for further information I am available for further information.
Last edited: