Symbianize Forum

Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.

All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!

B315s-936 Downgrading From 21.313 Firmware Version | No Need Mag-USB Mode

Anong firmware ang the best para sa 'yo?


  • Total voters
    499
patulong nman.. ayaw lumabas ang tool sa 64 bit ko.. bago nman syang instal at mya frame net naman sya v4.0...windos7 64bit
 
Last edited:
nakalimutan ko naka-on yung isang 936 ko sa kabilang kuwarto for more than 24 hours, it happened almost 5-6 times na. then nakababad na naman siya the other day 24 hours din, nag red yung sa signal , then no service na, for smart and globe. Plano ko re-install ang polkomtel, Ang tagal kumagat ni multicast para sa USB mode, nagmadali ako, pinindot ko yung reset button sa likod, nagblink, nag-multiple colors ang light, then unplug ko ang power then on... white light na lang. paktay, dahil sa laging nagmamadali sa at sa init ng ulo at panahon, masolusyunan ba ba ito o brick na? whew
 
nakalimutan ko naka-on yung isang 936 ko sa kabilang kuwarto for more than 24 hours, it happened almost 5-6 times na. then nakababad na naman siya the other day 24 hours din, nag red yung sa signal , then no service na, for smart and globe. Plano ko re-install ang polkomtel, Ang tagal kumagat ni multicast para sa USB mode, nagmadali ako, pinindot ko yung reset button sa likod, nagblink, nag-multiple colors ang light, then unplug ko ang power then on... white light na lang. paktay, dahil sa laging nagmamadali sa at sa init ng ulo at panahon, masolusyunan ba ba ito o brick na? whew

Ganyan din nang yari sa akin biglang nag red d ko pa alam kung anu ang solution under observation pa n sangkay mulot.
 
Ganyan din nang yari sa akin biglang nag red d ko pa alam kung anu ang solution under observation pa n sangkay mulot.

Actually naka-on siya for a long period of time na hindi ginagamit pang internet, naka-on lang,. Yun pong power button na lang a
ng umilaw, brick na ba ang modem?
 
Last edited:
Actually naka-on siya for a long period of time na hindi ginagamit pang internet, naka-on lang,. Yun pong power button na lang a
ng umilaw, brick na ba ang modem?

Ang tanong ma off pa ba yung modem o hindi na?
 
Ang sakit ng feeling na hindi ka napapansin ni crush ing tipong mapapapost ka na lng ng kung ano-ano mailabas lng ang kalungkutan. Hayyyst :(
 
Ang tanong ma off pa ba yung modem o hindi na?

hindi na ma off bro. tsk, kailangan na ihugot ang power plug para ma-off ang modem.
Brick na ba to brod Clief?
 
Last edited:
hindi na ma off bro. tsk, kailangan na ihugot ang power plug para ma-off ang modem.
Brick na ba to brod Clief?

Yang problemang yan ay same sa isa kong 936 under observation pa poh yan d ko pa poh alam kung may update na c sangkay mulot.
 
Matagal din ako nagresearch para dito. maraming salamat Master mulot sa mga sangkap at tutorial mo, nagawa ko ng maayos ang B315s-936 ko na unit kailangan lang talaga ng tiyaga...:clap::clap::clap: MABUHAY po kayo :salute::salute::salute:

credit po kay sir freddy3k, sir jmox, sir pedik at sa lahat ng di nabanggit...MABUHAY PO KAYO.

para sa tuts sa USB mode credits para sa http://www.blogmytuts.net/2015/10/hu...p-by-step.html
 
Last edited:
Yang problemang yan ay same sa isa kong 936 under observation pa poh yan d ko pa poh alam kung may update na c sangkay mulot.

Sa polkomtel firmware b yan nangyayari?bka bug yan sa polko?
 
Kaw po ata yung may bagong balita eh...share na dyan mast3r pedik.

wala pa eh, busy sa work :)

naghahanap pa rin ng way how to enable busybox sa 936 kung may spare time :) may firmware kayang naka enable ang SSH by default? sa s22 kasi ang T-mobile ata ang naka enable na ang telnet by default..
 
Sa polkomtel firmware b yan nangyayari?bka bug yan sa polko?

yes polkomtel po. After ko ma-pindot ang reset button wala na wifi signal indicator and LAN indicator, not deteted na ang unit sa LAN- but detected siya sa USB as " Android single ADB Interface", what is the meaning of " Android single ADB Interface". Not detected po sa CID reader. But tried to reset using power + reset button sa baba, nag-undergo siya ng red - blue - green but hindi nag steady si green (USB mode). Need help. Hndi rin ma detect using multicast.
 
Last edited:
Refer to this thread sa di pa debranded/naka-globe firmware pa:
B315s-936 Debranding Tutorial

Ito na wala ng patago-tago pa. Matagal ko na itong nalaman. After 3 days na kulang sa tulog.:weep:
Pwede din 'to sa mga hindi makapunta sa USB Mode at stuck sa Blue light.

Firmware list:
Choose kung anung gamit niyo ngayon at gustong ipalit.
From South Africa Telkom to Polkomtel
From South Africa Telkom to Zain
From Middle East(21.313) to Polkomtel
From Middle East(21.313) to Zain

Others na na-upload ko na:
Zain to Polkomtel
Polkomtel to Zain
Middle East(21.300) to Polkomtel
Globe to Universal(21.313)
Globe to Play
Globe to Polkomtel
Globe to South Africa Telkom

Requirements:
1. PuTTY or cmd ng windows
2. E5186 Toolbox
3. Multicast Upgrade Tool


Procedure:
1. Connect 936 sa LAN, Open E5186 Toolbox, enter admin password, Connect. Huwag i-click ang GET. See SS.
http://i.imgur.com/pHD8t9Z.png

2. Confirm if OK ang response and Exit.
http://i.imgur.com/35Lza0A.png

3. Open PuTTY, type IP, select Telnet, Click Open or See the screenshot. Pwede rin, open cmd, type telnet 192.168.8.1
http://i.imgur.com/mHw9N5g.png

4. Type ati to confirm na connected tayo sa modem at ung commands sa baba.
at^sfm=1
at^reset

http://i.imgur.com/vftWI6k.png

5. Unplug power adapter ng modem.

6. Set static IP.
http://i.imgur.com/Je3Ukvp.png

7. Open Multicast Upgrade Tool, Select Network Card, piliin kung anong firmware ang gamit niyo sa modem at kung ano gustong ipalit, click Start.
http://i.imgur.com/WaC1Acb.png

8. Plug power adapter ng modem, wait mapunta sa USB Mode(Green), Tanggalin ang LAN at isaksak ang male to male USB Cord, modem at PC. Alams na.
Open CID Reader, DC Unlocker, etc. I'm sure meron kayo niyan at kung panu paganahin.
Enter commands:
at^sfm=0
at^reset


9. Remove USB Cord, Remove static IP sa LAN at iset sa Obtain automatically.
Open browser(incognito mode), type 192.168.8.1, login, hanapin ang Restore Defaults, click OK, wait mag-reboot ang modem.

10. Boom!
:lol:

== EXTRAS ==
Change DNS
http://i.imgur.com/u1I6lJm.png


Credit kay sir freddy3k sa AT Commands. :salute:

Related threads: (credits sa thread starters)
B315s-936 Debranding Tutorial
B315s-936 Unlock and Semi-Admin Access

Gudevening po mga Master! Ask ko lang po, sariwa pa B315s-936 ko hindi pa naopenline kasi hindi ko mapasok ang usb mode ayaw mag green hanggang blue lang, kapag nadebrand ba may pag asa na ba maopenline? sana po masagot nyo po. Salamat po.
 
yes polkomtel po. After ko ma-pindot ang reset button wala na wifi signal indicator and LAN indicator, not deteted na ang unit sa LAN- but detected siya sa USB as " Android single ADB Interface", what is the meaning of " Android single ADB Interface". Not detected po sa CID reader. But tried to reset using power + reset button sa baba, nag-undergo siya ng red - blue - green but hindi nag steady si green (USB mode). Need help. Hndi rin ma detect using multicast.

wow wow wow....hehehehehehe....papano mo nagawa yan....i mean nag flash ka ng polkomtel then na reset botton? anong firmware mo before ka nag polkomtel ?
 
Back
Top Bottom