B315s-936 old and new modem power led steady problem (solve)

[jackiebray]

Credit PO si sir gltimbreza
Tuts for B315s-936 power light problem only

*Basahin lahat muna bago simulan.. may mga revisions.

working lang on following conditions: ETO YUNG MODEM NA NEW B315S-936 WITH BLUE LEBEL

1. Successful sa new openline ng 936 pero after ng reset e powerlight pa rin.

2. Unknown device sa Device manager - details - Hardware IDs - VID_12D1&PID_36DD.

Kung hindi mo naabot yung "Done/Remove battery and put it again" bka hindi gumana.

Mostly lahat nang successful e ginamit Win7 64bit OS.

UNA sa lahat i download muna ito using flasher..
--> https://www.mediafire.com/?78ytzt91jtclu6n

at tapos download nyu ulit to kasi ito yung mga required na tools

-->http://www.mediafire.com/file/adb2a2i69c7wd8n/b315s-936_for_powerlight_only.rar

pagkatapos nyu i flash eto gawin nyu??


1. Hard reset, either :
a. press power button at reset button then plug power, pag umilaw yung red, wag bitawan hanggang hindi nawawala ynug red.
b. pag hindi umilaw yung red, press power at wps buttons, pag umilaw yung red, wag bitawan hanggang hindi nawawala yung red.

2. Hintayin umilaw blue light at last two signal bars. wag galawin.

3. Hintayin umilaw red light at first and last signal bars. wag galawin.

4. Hintayin na power light na lang. plug usb to usb cord.

5. Check sa device drivers dapat may unknown .,
-CLICK MY COMPUTER THEN MANAGE
- CLICK NYU UNG unknown
-THEN UPDATE DRIVER SOFTWARE..
-BROWSE MY COMPUTER FOR DRIVER SOFTWARE
-LET ME PICK FROM LIST DIRVER ON MY COMPUTER
-TAPOS HAVE DISK
-THEN BROWSE LOCATE NYU KONG SAAAN NYU IN SAVE UNG ANDROID_WINUSB
-THEN OK MO NALANG
6. Ipilit and driver na - Android ADB Interface

TAKE NOTE ITO YUNG PINAKA MAHALAGAN PROCESS OK

7. Go to run then CMD. run as administrator-
Change ka sa directory kung saan mo""" inextract yung files""" - "CD c:\files"
KONG NASA C: YUNG FILES NA IN EXTRACT MO
MEANS YUNG MGA FILES NA NASA TAAS NA DOWNLOAD MO..
OR COPY MO NALANG LAHAT ILAGAY MO SA FOLDER NA files

Dapat yung cmd mo "c:\files>"

8. Sa CMD, type
Code:1

fastboot -i0x12d1 getvar product

9. Dapat may magpakita na - product: balongv7r2

10. Sa CMD ulit, type

Code:2

fastboot -i0x12d1 erase nvimg

11. Dapat may response na "OK".

12. Sa CMD ulit, type

Code:3

fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
13. Dapat may response na "OK".


14. Reboot na
buhay na ulit modem mo


OLD B315S-936

Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2

Plug Power pag d umilaw bitawan muna OK NA .
pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulitIN MO JUMPER MO


Plug USB ----PLUG USB

1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na IILAW NA YUNG LED LIGHT NYA STEADY LANG GUYS ..WAG MO LANG I CLOSE HAYAAN MO LANG SI BALONG.. THEN..

2. Open Firmware Folder
- Click go_hdlc
- Enter LANG PARA MAG EXIT DAPAT OK LAHAT NG RESPONSE

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file

RECOMMENDED KO LANG MAS MAGANDA YUNG MIDDLE EAST FRIMEWARE..NASA TAAS YUNG MGA FILE GUYS..

-Antayin na may nakasulat na Done/Remove battery and put it again..
-AT DAPAT GUYS OK LAHAT NG RESPONCE SA FRIMEWARE HA
- Close

TAPOS REBOOT
.. TANGALIN MUNA YUNG JUMPER MO..
TAPOS SUNDIN MUNA YUNG TUT. SA TAAS WORKING 101% MABUBUHAY MODEM NYU ..TESTED SA NEW MODEM B315S-936 AT OLD B315S-936 DONT FOR GET TO THANKS ME ...

DAPAT GUYS LAHAT NG REQUIRED FILES DOWNLOAD LAHAT HA,,PARA GUMANAView attachment 281923

 

[chukchanero]

Credit PO si sir gltimbreza
Tuts for B315s-936 power light problem only

*Basahin lahat muna bago simulan.. may mga revisions.

working lang on following conditions: ETO YUNG MODEM NA NEW B315S-936 WITH BLUE LEBEL

1. Successful sa new openline ng 936 pero after ng reset e powerlight pa rin.

2. Unknown device sa Device manager - details - Hardware IDs - VID_12D1&PID_36DD.

Kung hindi mo naabot yung "Done/Remove battery and put it again" bka hindi gumana.

Mostly lahat nang successful e ginamit Win7 64bit OS.

UNA sa lahat i download muna ito using flasher..
--> https://www.mediafire.com/?78ytzt91jtclu6n

at tapos download nyu ulit to kasi ito yung mga required na tools

-->http://www.mediafire.com/file/adb2a2i69c7wd8n/b315s-936_for_powerlight_only.rar

pagkatapos nyu i flash eto gawin nyu??


1. Hard reset, either :
a. press power button at reset button then plug power, pag umilaw yung red, wag bitawan hanggang hindi nawawala ynug red.
b. pag hindi umilaw yung red, press power at wps buttons, pag umilaw yung red, wag bitawan hanggang hindi nawawala yung red.

2. Hintayin umilaw blue light at last two signal bars. wag galawin.

3. Hintayin umilaw red light at first and last signal bars. wag galawin.

4. Hintayin na power light na lang. plug usb to usb cord.

5. Check sa device drivers dapat may unknown .,
-CLICK MY COMPUTER THEN MANAGE
- CLICK NYU UNG unknown
-THEN UPDATE DRIVER SOFTWARE..
-BROWSE MY COMPUTER FOR DRIVER SOFTWARE
-LET ME PICK FROM LIST DIRVER ON MY COMPUTER
-TAPOS HAVE DISK
-THEN BROWSE LOCATE NYU KONG SAAAN NYU IN SAVE UNG ANDROID_WINUSB
-THEN OK MO NALANG
6. Ipilit and driver na - Android ADB Interface

TAKE NOTE ITO YUNG PINAKA MAHALAGAN PROCESS OK

7. Go to run then CMD. run as administrator-
Change ka sa directory kung saan mo""" inextract yung files""" - "CD c:\files"
KONG NASA C: YUNG FILES NA IN EXTRACT MO
MEANS YUNG MGA FILES NA NASA TAAS NA DOWNLOAD MO..
OR COPY MO NALANG LAHAT ILAGAY MO SA FOLDER NA files

Dapat yung cmd mo "c:\files>"

8. Sa CMD, type
Code:1

fastboot -i0x12d1 getvar product

9. Dapat may magpakita na - product: balongv7r2

10. Sa CMD ulit, type

Code:2

fastboot -i0x12d1 erase nvimg

11. Dapat may response na "OK".

12. Sa CMD ulit, type

Code:3

fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
13. Dapat may response na "OK".


14. Reboot na
buhay na ulit modem mo


OLD B315S-936

Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2

Plug Power pag d umilaw bitawan muna OK NA .
pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulitIN MO JUMPER MO


Plug USB ----PLUG USB

1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na IILAW NA YUNG LED LIGHT NYA STEADY LANG GUYS ..WAG MO LANG I CLOSE HAYAAN MO LANG SI BALONG.. THEN..

2. Open Firmware Folder
- Click go_hdlc
- Enter LANG PARA MAG EXIT DAPAT OK LAHAT NG RESPONSE

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file

RECOMMENDED KO LANG MAS MAGANDA YUNG MIDDLE EAST FRIMEWARE..NASA TAAS YUNG MGA FILE GUYS..

-Antayin na may nakasulat na Done/Remove battery and put it again..
-AT DAPAT GUYS OK LAHAT NG RESPONCE SA FRIMEWARE HA
- Close

TAPOS REBOOT
.. TANGALIN MUNA YUNG JUMPER MO..
TAPOS SUNDIN MUNA YUNG TUT. SA TAAS WORKING 101% MABUBUHAY MODEM NYU ..TESTED SA NEW MODEM B315S-936 AT OLD B315S-936 DONT FOR GET TO THANKS ME ...

DAPAT GUYS LAHAT NG REQUIRED FILES DOWNLOAD LAHAT HA,,PARA GUMANAView attachment 1178290

ts nagawa ko na ata lahat ng paraan para sa old 936 ko,ang problema ayaw ma detect yung ADB android,tapos kapag hard reset naman,tulala na lang sa red light na may last 2 signal bar,may idea ka TS paano ayusin?

 

[Pedik]

ts nagawa ko na ata lahat ng paraan para sa old 936 ko,ang problema ayaw ma detect yung ADB android,tapos kapag hard reset naman,tulala na lang sa red light na may last 2 signal bar,may idea ka TS paano ayusin?

use zain hmf file

 

[chukchanero]

use zain hmf file

naka ilang flash narin ako za zain sir pedik pero wala parin,ayaw mag blue sa hard reset at ayaw madetect ADB android

 

[Pedik]

naka ilang flash narin ako za zain sir pedik pero wala parin,ayaw mag blue sa hard reset at ayaw madetect ADB android

walang detect sa PC? tested kasi ang zain hmf para sa adb repair

 

[chukchanero]

walang detect sa PC? tested kasi ang zain hmf para sa adb repair

oo sir walang detect,e nag have disk na ako,exclamation point lang yung android ADB,pwede mo iTV sir pedik?

 

[Pedik]

oo sir walang detect,e nag have disk na ako,exclamation point lang yung android ADB,pwede mo iTV sir pedik?

tested ba yan usb cable mo? sorry hina ng net ko ngayon, kinatay kasi

 

[chukchanero]

tested ba yan usb cable mo? sorry hina ng net ko ngayon, kinatay kasi

oo sir tested kasi hindi ako makakapasok kay balong kung may problema cable,basta pagkatapos ko mag flash ng FW,at pag naghard reset ako hindi man iilaw yung blue,rekta agad sa red at tulala na lang sya sa red light,tapos yun nga di rin madetect android ABD,add na lang kita sir FB na pm kita reply kana lang sir ehe

 

[mark_russell018]

oo sir tested kasi hindi ako makakapasok kay balong kung may problema cable,basta pagkatapos ko mag flash ng FW,at pag naghard reset ako hindi man iilaw yung blue,rekta agad sa red at tulala na lang sya sa red light,tapos yun nga di rin madetect android ABD,add na lang kita sir FB na pm kita reply kana lang sir ehe

same tayo ng problem sir kapag zain FW na hindi madetect ng android ADB..tsaka tulala nadin huhu

 

[chukchanero]

same tayo ng problem sir kapag zain FW na hindi madetect ng android ADB..tsaka tulala nadin huhu

palagay ko nasa FW na gagamitin malamang maraming beses ang ipaflash na FW na papalit palit dapat

 

[mark_russell018]

palagay ko nasa FW na gagamitin malamang maraming beses ang ipaflash na FW na papalit palit dapat

try mo yung openline pang new 936 sir, may ADB sya kaso stuck sakin sa waiting for device

 

[jackiebray]

palagay ko nasa FW na gagamitin malamang maraming beses ang ipaflash na FW na papalit palit dapat

sorry idol ngayung lang ako naka online ..hehe anung windows gamit mo..??? hindi ka naka usb mode pag hindi ma detect yung modem sa comp..dpat may unknow muna bago mo palitan yun sa adb... kasi pag old 936 modem ,,,i flash mo muna ,,,using balong and the flasher idol... wag mong kalimutan yung jumper ha,,para gumana at kumapit si balong ,,,..

- - - Updated - - -

palagay ko nasa FW na gagamitin malamang maraming beses ang ipaflash na FW na papalit palit dapat

try mo yung openline pang new 936 sir, may ADB sya kaso stuck sakin sa waiting for device

oo try mo idol ..using jumper balong then flash mo yung middle east na frimeware ..try mo lang baka gumana sayu ,,kasi un ginagawa ko ,,ok naman

- - - Updated - - -

ts nagawa ko na ata lahat ng paraan para sa old 936 ko,ang problema ayaw ma detect yung ADB android,tapos kapag hard reset naman,tulala na lang sa red light na may last 2 signal bar,may idea ka TS paano ayusin?

basahin mo maigi idol baka kinulang ka sa process
OLD B315S-936

Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2

Plug Power pag d umilaw bitawan muna OK NA .
pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulitIN MO JUMPER MO


Plug USB ----PLUG USB

1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na IILAW NA YUNG LED LIGHT NYA STEADY LANG GUYS ..WAG MO LANG I CLOSE HAYAAN MO LANG SI BALONG.. THEN..

2. Open Firmware Folder
- Click go_hdlc
- Enter LANG PARA MAG EXIT DAPAT OK LAHAT NG RESPONSE

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file

- - - Updated - - -

naka ilang flash narin ako za zain sir pedik pero wala parin,ayaw mag blue sa hard reset at ayaw madetect ADB android

hindi yan ma dedetect ng adb andriod idol dapat i have disk mo muna tapos ipilit mo yung adb interface ,,,,sundin mo muna yung process na old modem

- - - Updated - - -

same tayo ng problem sir kapag zain FW na hindi madetect ng android ADB..tsaka tulala nadin huhu

try nyu ung middle east frimeware yung nasa files ko ,,download nyu nalang

 

[vhinnzkhie]

Mga bossing,i have the same issues po sa 936 ko.nkapgflash nga ako ng FW ZAin.ang problema,pg inopen ko gui nia,walang device information sa system.d ko alam kung pano maibalik ung IMEI nia.pg ngflash nmn ako ibang FW,tulala nlng xa sa red light.ginawa ko n rin lahat ng process kya lng wla tlgang umandar.nkakaurat na kc ang sakit sa ulo mga TUTS.4days ko n po ginagawa ung modem ko.please send me some tutsirol.

 

[jackiebray]

Mga bossing,i have the same issues po sa 936 ko.nkapgflash nga ako ng FW ZAin.ang problema,pg inopen ko gui nia,walang device information sa system.d ko alam kung pano maibalik ung IMEI nia.pg ngflash nmn ako ibang FW,tulala nlng xa sa red light.ginawa ko n rin lahat ng process kya lng wla tlgang umandar.nkakaurat na kc ang sakit sa ulo mga TUTS.4days ko n po ginagawa ung modem ko.please send me some tutsirol.

try ,mo i hard reset ??tapos jumperan mo using balong process

 

[vhinnzkhie]

mga tutskie, baka pwede po pa help sa nangyari sa modem 936 ko. nagdebrand po ako. using lots of firmware po.nagamit ko na lahat ng firmware. ang problema ko po is nawawala ung device information kya ang result po is d akomkaconnect sa net kht anong sim. as in unlock po xa, u lng po may problema, ung device information po as in blank xa. walang valid na SSID as well. pahelp nmn po sa may alm ng ganitong issue. maraming thank you in advance po.


see image file po.:
View attachment 301311
View attachment 301313

 

[jackiebray]

mga tutskie, baka pwede po pa help sa nangyari sa modem 936 ko. nagdebrand po ako. using lots of firmware po.nagamit ko na lahat ng firmware. ang problema ko po is nawawala ung device information kya ang result po is d akomkaconnect sa net kht anong sim. as in unlock po xa, u lng po may problema, ung device information po as in blank xa. walang valid na SSID as well. pahelp nmn po sa may alm ng ganitong issue. maraming thank you in advance po.


see image file po.:
View attachment 1178723
View attachment 1178724

try mo nalang ulit yung procedure ko ,,baka gumana ,,k

 

[vhinnzkhie]

try mo nalang ulit yung procedure ko ,,baka gumana ,,k

pops, wala po tla.nvram po ang nadale, my alam po ba kaung pang recover ng nvram? un po kc ang nid ko kung pano ko mareretriv ung IMEI nia. ang problema po kc walang nkalagay na IMEI sa bahay ng modem na ganito. pa help nmn po bossing. 5 days na po now na inaayos ko to.

 

[edeapera]

Credit PO si sir gltimbreza
Tuts for B315s-936 power light problem only

*Basahin lahat muna bago simulan.. may mga revisions.

working lang on following conditions: ETO YUNG MODEM NA NEW B315S-936 WITH BLUE LEBEL

1. Successful sa new openline ng 936 pero after ng reset e powerlight pa rin.

2. Unknown device sa Device manager - details - Hardware IDs - VID_12D1&PID_36DD.

Kung hindi mo naabot yung "Done/Remove battery and put it again" bka hindi gumana.

Mostly lahat nang successful e ginamit Win7 64bit OS.

UNA sa lahat i download muna ito using flasher..
--> https://www.mediafire.com/?78ytzt91jtclu6n

at tapos download nyu ulit to kasi ito yung mga required na tools

-->http://www.mediafire.com/file/adb2a2i69c7wd8n/b315s-936_for_powerlight_only.rar

pagkatapos nyu i flash eto gawin nyu??


1. Hard reset, either :
a. press power button at reset button then plug power, pag umilaw yung red, wag bitawan hanggang hindi nawawala ynug red.
b. pag hindi umilaw yung red, press power at wps buttons, pag umilaw yung red, wag bitawan hanggang hindi nawawala yung red.

2. Hintayin umilaw blue light at last two signal bars. wag galawin.

3. Hintayin umilaw red light at first and last signal bars. wag galawin.

4. Hintayin na power light na lang. plug usb to usb cord.

5. Check sa device drivers dapat may unknown .,
-CLICK MY COMPUTER THEN MANAGE
- CLICK NYU UNG unknown
-THEN UPDATE DRIVER SOFTWARE..
-BROWSE MY COMPUTER FOR DRIVER SOFTWARE
-LET ME PICK FROM LIST DIRVER ON MY COMPUTER
-TAPOS HAVE DISK
-THEN BROWSE LOCATE NYU KONG SAAAN NYU IN SAVE UNG ANDROID_WINUSB
-THEN OK MO NALANG
6. Ipilit and driver na - Android ADB Interface

TAKE NOTE ITO YUNG PINAKA MAHALAGAN PROCESS OK

7. Go to run then CMD. run as administrator-
Change ka sa directory kung saan mo""" inextract yung files""" - "CD c:\files"
KONG NASA C: YUNG FILES NA IN EXTRACT MO
MEANS YUNG MGA FILES NA NASA TAAS NA DOWNLOAD MO..
OR COPY MO NALANG LAHAT ILAGAY MO SA FOLDER NA files

Dapat yung cmd mo "c:\files>"

8. Sa CMD, type
Code:1

fastboot -i0x12d1 getvar product

9. Dapat may magpakita na - product: balongv7r2

10. Sa CMD ulit, type

Code:2

fastboot -i0x12d1 erase nvimg

11. Dapat may response na "OK".

12. Sa CMD ulit, type

Code:3

fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
13. Dapat may response na "OK".


14. Reboot na
buhay na ulit modem mo


OLD B315S-936

Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2

Plug Power pag d umilaw bitawan muna OK NA .
pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulitIN MO JUMPER MO


Plug USB ----PLUG USB

1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na IILAW NA YUNG LED LIGHT NYA STEADY LANG GUYS ..WAG MO LANG I CLOSE HAYAAN MO LANG SI BALONG.. THEN..

2. Open Firmware Folder
- Click go_hdlc
- Enter LANG PARA MAG EXIT DAPAT OK LAHAT NG RESPONSE

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file

RECOMMENDED KO LANG MAS MAGANDA YUNG MIDDLE EAST FRIMEWARE..NASA TAAS YUNG MGA FILE GUYS..

-Antayin na may nakasulat na Done/Remove battery and put it again..
-AT DAPAT GUYS OK LAHAT NG RESPONCE SA FRIMEWARE HA
- Close

TAPOS REBOOT
.. TANGALIN MUNA YUNG JUMPER MO..
TAPOS SUNDIN MUNA YUNG TUT. SA TAAS WORKING 101% MABUBUHAY MODEM NYU ..TESTED SA NEW MODEM B315S-936 AT OLD B315S-936 DONT FOR GET TO THANKS ME ...

DAPAT GUYS LAHAT NG REQUIRED FILES DOWNLOAD LAHAT HA,,PARA GUMANAView attachment 1178290

big help po

 

[eRainbow]

Thanks for sharing.

 

[clayandmiel]

adbWinapi.dll ang hinahanap saken.. nasa cmd process nako..naghanap ako sa google ng dll na yan at inilagay ko sa c/system32.pero yun pa rin ang error ko sa cmd.... patulong nmn.. nakaka sakit ng ulo ito....