B315s-936 old and new modem power led steady problem (solve)

[argiemateo]

sir ts, ask ko lng kailangan pa ba ng microsoft framework para mapagana? tnx in advance...

 

[reynant]

Try this
http://www.symbianize.com/showthread.php?t=1431241

 

[Jay0Mark]

Patulong po! Bakit nag fefailed naman po sa akin sa fastboot -i0xd21 erase nvimg???

 

[agarzki09]

Patulong po! Bakit nag fefailed naman po sa akin sa fastboot -i0xd21 erase nvimg???

ako din failed sa code 2 or 3 code kahit nagawa ko nun una siya. sabi sakin change disk daw. pano kaya yun

 

[princeshin15]

Bakit po pag sinesend ko sa CMD yung code waiting for device yung response? pa help naman po pleaseView attachment 322112

 

[WarHammerX]

wala ba dito nag rereset for a fee, ala time na kalikutin ala ako alam eh.....

please test me at 09062091671, location, contact at rate ng services, dadalhin ko na lang sa inyo un unit kayo na gumawa

thanks

 

[jakemarf]

ito po ba ung pra sa no service after madebrand at openline?

 

[saintmg]

Credit PO si sir gltimbreza
Tuts for B315s-936 power light problem only

*Basahin lahat muna bago simulan.. may mga revisions.

working lang on following conditions: ETO YUNG MODEM NA NEW B315S-936 WITH BLUE LEBEL

1. Successful sa new openline ng 936 pero after ng reset e powerlight pa rin.

2. Unknown device sa Device manager - details - Hardware IDs - VID_12D1&PID_36DD.

Kung hindi mo naabot yung "Done/Remove battery and put it again" bka hindi gumana.

Mostly lahat nang successful e ginamit Win7 64bit OS.

UNA sa lahat i download muna ito using flasher..
--> https://www.mediafire.com/?78ytzt91jtclu6n

at tapos download nyu ulit to kasi ito yung mga required na tools

-->http://www.mediafire.com/file/adb2a2i69c7wd8n/b315s-936_for_powerlight_only.rar

pagkatapos nyu i flash eto gawin nyu??


1. Hard reset, either :
a. press power button at reset button then plug power, pag umilaw yung red, wag bitawan hanggang hindi nawawala ynug red.
b. pag hindi umilaw yung red, press power at wps buttons, pag umilaw yung red, wag bitawan hanggang hindi nawawala yung red.

2. Hintayin umilaw blue light at last two signal bars. wag galawin.

3. Hintayin umilaw red light at first and last signal bars. wag galawin.

4. Hintayin na power light na lang. plug usb to usb cord.

5. Check sa device drivers dapat may unknown .,
-CLICK MY COMPUTER THEN MANAGE
- CLICK NYU UNG unknown
-THEN UPDATE DRIVER SOFTWARE..
-BROWSE MY COMPUTER FOR DRIVER SOFTWARE
-LET ME PICK FROM LIST DIRVER ON MY COMPUTER
-TAPOS HAVE DISK
-THEN BROWSE LOCATE NYU KONG SAAAN NYU IN SAVE UNG ANDROID_WINUSB
-THEN OK MO NALANG
6. Ipilit and driver na - Android ADB Interface

TAKE NOTE ITO YUNG PINAKA MAHALAGAN PROCESS OK

7. Go to run then CMD. run as administrator-
Change ka sa directory kung saan mo""" inextract yung files""" - "CD c:\files"
KONG NASA C: YUNG FILES NA IN EXTRACT MO
MEANS YUNG MGA FILES NA NASA TAAS NA DOWNLOAD MO..
OR COPY MO NALANG LAHAT ILAGAY MO SA FOLDER NA files

Dapat yung cmd mo "c:\files>"

8. Sa CMD, type
Code:1

fastboot -i0x12d1 getvar product

9. Dapat may magpakita na - product: balongv7r2

10. Sa CMD ulit, type

Code:2

fastboot -i0x12d1 erase nvimg

11. Dapat may response na "OK".

12. Sa CMD ulit, type

Code:3

fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
13. Dapat may response na "OK".


14. Reboot na
buhay na ulit modem mo


OLD B315S-936

Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2

Plug Power pag d umilaw bitawan muna OK NA .
pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulitIN MO JUMPER MO


Plug USB ----PLUG USB

1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na IILAW NA YUNG LED LIGHT NYA STEADY LANG GUYS ..WAG MO LANG I CLOSE HAYAAN MO LANG SI BALONG.. THEN..

2. Open Firmware Folder
- Click go_hdlc
- Enter LANG PARA MAG EXIT DAPAT OK LAHAT NG RESPONSE

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file

RECOMMENDED KO LANG MAS MAGANDA YUNG MIDDLE EAST FRIMEWARE..NASA TAAS YUNG MGA FILE GUYS..

-Antayin na may nakasulat na Done/Remove battery and put it again..
-AT DAPAT GUYS OK LAHAT NG RESPONCE SA FRIMEWARE HA
- Close

TAPOS REBOOT
.. TANGALIN MUNA YUNG JUMPER MO..
TAPOS SUNDIN MUNA YUNG TUT. SA TAAS WORKING 101% MABUBUHAY MODEM NYU ..TESTED SA NEW MODEM B315S-936 AT OLD B315S-936 DONT FOR GET TO THANKS ME ...

DAPAT GUYS LAHAT NG REQUIRED FILES DOWNLOAD LAHAT HA,,PARA GUMANAView attachment 1178290

Ang hirap naman "TAPOS SUNDIN MUNA YUNG TUT. SA TAAS WORKING 101% MABUBUHAY MODEM NYU" ... di ko maintindihan po yan newbie po dito please help wala sana merong full tutorial na hindi nag skip please

 

[allex0105]

same p rin

 

[ArVince]

TS working pa ba to? Gagawen ko sana sa 936 ko na blue label power only. Salamat sa TUTS! Malaking tulong to

 

[jamp13]

Followed the steps for flashing, okay naman po lahat. Pag mag start na ko dun sa hard reset: pag pinress ko yung POWER + WPS nag rered sya kaso nawawala kahit di ko binibitawan. Pag naman POWER + RESET di nag oopen yung red na LED. Salamat po sa sasagot.

 

[SKATERBOI060388]

same problem no signal openline nman patulong po.

 

[janry24]

Up this thread! baka may mga ibang tut! thanks in advance