B315s-936 Unlock and Admin Access

[jestro999]

mga sir paano po gagawin pag usb not recognized? win7 32bit po ako.

download mu ung driver nung modem sir

 

[xenonflash23]

may nagbebenta sakin 936 .. may 4g ba ito sa smart prepaid at smart LTE sim?

 

[target143]

thanks ts,ity ko to sa 936 ko

 

[vergelemo3]

nasira na ata modem ko nakatapos naman ako hanggang config updater tapos hindi na ko makapag usb mode. after kong i press yung wps + power, mag blue sya tapos steady red lights nalang. natulala na ata sya. pahelp naman mga ka symb.

 

[sier72]

Pa mark... magawa pag may time ako thanks

 

[ppppppau]

TS ask lang pano mag steady ng greenlight. Ayaw eh. Sinusunod ko naman yung tut mo. 2 sec lang nag greenlight tapos balik sa red.

 

[digitalranma]

boss, quick question: enabling admin access sa 936 modem also enables APN editing? or thru commands pa rin?

 

[angryBIRDernie]

boss, quick question: enabling admin access sa 936 modem also enables APN editing? or thru commands pa rin?

Through AT commands pa rin yung pag-edit ng APN settings sir.

- - - Updated - - -

Pa mark... magawa pag may time ako thanks

welcome sir.

- - - Updated - - -

TS ask lang pano mag steady ng greenlight. Ayaw eh. Sinusunod ko naman yung tut mo. 2 sec lang nag greenlight tapos balik sa red.

Cguraduhin mong LAN cable gamitin mo ka-symb, hindi yung USB to USB cable nya.

- - - Updated - - -

thanks ts,ity ko to sa 936 ko

Youre welcome sir.

- - - Updated - - -

may nagbebenta sakin 936 .. may 4g ba ito sa smart prepaid at smart LTE sim?

meron sir, basta tama yung APN settings.

- - - Updated - - -

nasira na ata modem ko nakatapos naman ako hanggang config updater tapos hindi na ko makapag usb mode. after kong i press yung wps + power, mag blue sya tapos steady red lights nalang. natulala na ata sya. pahelp naman mga ka symb.

• Enter USB mode.
• Run CID reader in USB mode and enter the following commands:
Code 1:
at^sfm=0 ===> This command will kick your modem out of factory mode
Code 2:
AT^reset ===> Resets and reboots the modem
• After successfully rebooting, go to Network Properties again and Tick “Obtain IP Address Automatically” and “Obtain DNS Address Automatically”. Try to log into the modem’s web interface by typing 192.168.254.254 in your browser.

Enter the Following Information in the boxes provided.
Username: admin
Password: admin

• Go to “Settings”.


• Choose “Restore Default”
• The modem will reboot.

- - - Updated - - -

Need po ba i usb mode ang unit bago magawa ung mga steps...

Oo sir. Need USB mode para gumana yung AT commands.

- - - Updated - - -

naka pag admin access ako gamit tong tut ni ts. intindihin nyo lang ng mabuti magagawa nyo yan thanks ts.

Thanks sa positive feedback sir.

- - - Updated - - -

mga sir paano po gagawin pag usb not recognized? win7 32bit po ako.

change mo yung usb cable mo sir. bka yun ang problema

 

[jestro999]

• Enter USB mode.
• Run CID reader in USB mode and enter the following commands:
Code 1:
at^sfm=0 ===> This command will kick your modem out of factory mode
Code 2:
AT^reset ===> Resets and reboots the modem
• After successfully rebooting, go to Network Properties again and Tick “Obtain IP Address Automatically” and “Obtain DNS Address Automatically”. Try to log into the modem’s web interface by typing 192.168.254.254 in your browser.

Enter the Following Information in the boxes provided.
Username: admin
Password: admin

• Go to “Settings”.


• Choose “Restore Default”
• The modem will reboot.

sir tanong ko lang po, ginawa ko po ung procedure na yan pero pag tapos po d nmn po maka access sa admin, tinry ko ung admin:admin ayaw po ung default user at pass prin ang pwede

 

[jessamaeparco]

Tested ko na po eto, pa up natin

 

[angryBIRDernie]

• Enter USB mode.
• Run CID reader in USB mode and enter the following commands:
Code 1:
at^sfm=0 ===> This command will kick your modem out of factory mode
Code 2:
AT^reset ===> Resets and reboots the modem
• After successfully rebooting, go to Network Properties again and Tick “Obtain IP Address Automatically” and “Obtain DNS Address Automatically”. Try to log into the modem’s web interface by typing 192.168.254.254 in your browser.

Enter the Following Information in the boxes provided.
Username: admin
Password: admin

• Go to “Settings”.


• Choose “Restore Default”
• The modem will reboot.

sir tanong ko lang po, ginawa ko po ung procedure na yan pero pag tapos po d nmn po maka access sa admin, tinry ko ung admin:admin ayaw po ung default user at pass prin ang pwede

May mali dun sa pagsunod mo ng mga steps dun sa admin access boss. try mo ulit kung gusto mo. pero di nmn advisable na magkaroon ka admin access kc wla ring APN at SMS settings dun kahit maka-log in ka man as admin..

- - - Updated - - -

Tested ko na po eto, pa up natin

Thanks sa positive feedback boss..

- - - Updated - - -

pwede ba to sa b593s?

Di pwede boss. Me ibang tut para dyan courtesy of our fellow symbianizers. Basa basa lng po..

- - - Updated - - -

Ahhh... Sayang naman. Para kasing congested masyado itong favorite Cell ID ng B315s ko. Sana magawan ng paraan ng mga masters dito.

I think nagla-lock-in yun modem natin sa isang cell ID depende sa proximity nila sa isat isa. so kung yung cellsite na yun eh located sa area kung saan maraming subscribers, then magiging congested talaga kc marami silang maghahati-hati sa bandwidth nung cell site..

 

[badex03]

ilagay mo sa post mo yung credits. madali lang naman sigurong gawin yun diba?

Medjo pa bida? Andoon naman ung problema mong credits kumakana pa ng ganun.

 

[alma240279]

pag nkaadmin access naba pwede mag switch sa auto 3g/4g????

 

[wARRlock1925]

pag nkaadmin access naba pwede mag switch sa auto 3g/4g????

mobile partner kelangan para diyan sir

 

[digitalranma]

Sir, ano po ba magiging advantage natin once ma unlock natin ang admin access sa 936 natin?

 

[lhOnchA]

Lan connection lang ba ang kailangan? Hindi na need yung usb to usb?

 

[alma240279]

mobile partner kelangan para diyan sir

ok slmat boss,kylangan parin pala mobile partner, kala ko pwede na kagad iset sa auto pag nakaadmin na

 

[angryBIRDernie]

pag nkaadmin access naba pwede mag switch sa auto 3g/4g????

Wla pong advandage yung admin access maliban sa option to Update Firmware. Wla pa rin kasi yung options to change APN settings at wla ring SMS feature kahit me admin access. kaya advice ko na kahit hanggang unlocking steps lang ang sundin dun sa tut ko para mas madali.

- - - Updated - - -

Sir, ano po ba magiging advantage natin once ma unlock natin ang admin access sa 936 natin?

Wla pong advantage yung admin access maliban sa option to Update Firmware. Wla pa rin kasi yung options to change APN settings at wla ring SMS feature kahit me admin access. kaya advice ko na kahit hanggang unlocking steps lang ang sundin dun sa tut ko para mas madali.

- - - Updated - - -

Lan connection lang ba ang kailangan? Hindi na need yung usb to usb?

Kailangan yung USB to USBb cable boss lalo na pag naka-USB mode ka na at kailangan mong mag-enter ng AT commands via CID Reader.

 

[ppppppau]

Nagawa ko tong tut ni TS. Ayos! Up!

 

[angryBIRDernie]

Nagawa ko tong tut ni TS. Ayos! Up!

Thanks sa positive feedback boss.