Mga Sir Patulong Nman Po ako kung Paano ko po Aayusin 2ng Modem Ko. Stock Po kse siya sa 2 bars pag InanLock Po. Pero nung nkahanap po ako ng Pede ko pong gawin, eh mas lumala po ata at hindi na po ako nkaka connect sa gui na 192.168.254.254. ganito po kse ginawa ko, ng download po ako ng Firmware Stock Globe v.30_Chaos79 tpos ginawa ko po 2ng thread na 2
Most Debranded B593s-22 and 931 Modem when reset goes unidentified...
when flashing using Modem upgrade Tool stop at 2 bars, blinking and it will not continue to flash even you let it for 24 hrs.
Here is the solution ----------------> set static ip sa lan port 192.168.254.1
subnet mask: 255.255.255.0
default gateway: 192.168.254.254
for Megafon Firmware:
1. run B593s-22 Modem Upgrader Tool (search nyo nalang yan)
2. do it just like debranding method
Lan IP should be 192.168.254.1
browse for globe firmware ni sir chaos79
click start
3. plug your device then press and hold wps button and wlan button
press power button and the powerled will light up
hayaan nyo lang then while booting up 3 lights of the signal bar will light up
continue pressing until it gets 5 bars then stop the upgrader software and your done.
My purpose of sharing this is to help other members...hit thanks nalang guys if working sa inyo
tpos yung dna po ako nkaconnect sa gui tpos yung Telephone lng po ng Modem ko ng Bliblink at 5 bar po siya.
patulong nmn po ako mga boss kung pano ko pa aayusin modem ko. Maraming maraming slamat po sa tutulong. Thank you..
Most Debranded B593s-22 and 931 Modem when reset goes unidentified...
when flashing using Modem upgrade Tool stop at 2 bars, blinking and it will not continue to flash even you let it for 24 hrs.
Here is the solution ----------------> set static ip sa lan port 192.168.254.1
subnet mask: 255.255.255.0
default gateway: 192.168.254.254
for Megafon Firmware:
1. run B593s-22 Modem Upgrader Tool (search nyo nalang yan)
2. do it just like debranding method
Lan IP should be 192.168.254.1
browse for globe firmware ni sir chaos79
click start
3. plug your device then press and hold wps button and wlan button
press power button and the powerled will light up
hayaan nyo lang then while booting up 3 lights of the signal bar will light up
continue pressing until it gets 5 bars then stop the upgrader software and your done.
My purpose of sharing this is to help other members...hit thanks nalang guys if working sa inyo
tpos yung dna po ako nkaconnect sa gui tpos yung Telephone lng po ng Modem ko ng Bliblink at 5 bar po siya.
patulong nmn po ako mga boss kung pano ko pa aayusin modem ko. Maraming maraming slamat po sa tutulong. Thank you..