Blank Wan ba Wimax Nyo???

[jilliancielo]

...sir help naman po
ayaw kc ma erase ng file
http://s2.postimg.org/4qgwnhqix/flaher_cmd.png

 

[jennrhanz05]

@Debric wla poh ba kahit isang error sa pag verify mo??then sa pag balik mo sa wan Ic ano length ng wire at type nito?? if ok nman poh ang lahat isa lang huh prob nyan baka hindi maaus ung pag kalagay mo sa Wan_Ic sa CPE board.., try not to use Socket Ic at direct mo nlang ung Wan_Ic sa CPE board using short length headset wires or direct it without wires., Bios settings under peripherals select Bi directional.. pag may problem parin update mo ako.., =)

@jilliancielo sir ano gamit mo na flasher 2.92.or 3.3?? length ng wires at type??Bios settings under peripherals select Bi directional.., =)

Sa lahat poh ng may Problem or Successfull Flashing paki SS nyo nman ung Flasher at CMD =)

 

[jilliancielo]

...2.9 po gmit kong flasher Sir
try konalang po muna ulitin pag kabit ng wan ic
baka po may d lang naayos mabuti
tnx po sir..


E2 po pla ss ng flasher ko
pansamantala gumawa pa kc ako pcb board


http://postimg.org/image/40r8ec2lx/


ear phone wire po pla gamit ko

 

[galeian]

Sino nka try na gumamit ng Universal Board?

balak ko gumamit nito hehehe

ito naman magandang guide hehehe

 

[jennrhanz05]

@jilliancielo super haba na ng wires na gamit mo kaya di madetect! hanap ka ng headset wire tapos Limit ka lang ng 0.75 Inch to 1 Inch na HEADSET WIRE.. Headset wire lang Gamitin mo.., ung Mga Legs ng Electronic Parts mo dapat short lang talaga at ung Gamit mo na Magnetic Wire Make Sure ung continuity nya ng data at current kaya mas mabuting Headset wire gamitin mo tapos use Multi tester to check ung continuity ng wire bago mo solder sa Parts ng Flasher mo.., More Info in making DIY Flasher?? visit ka d2 Video Tut For WAN_IC Flashing or Download Video =)

@galeian ahaha nice yang PCB ah.., =)

 

[galeian]

TS nakita ko kani na hardware nag check kasi ako sa mga parts para maka kita rin ng magandang idea hehehe...

TS i was planing to use wire ng UTP cable sa tingin mo ts gagana ba?

 

[psycopper]

TS, tanong ko lang kung ano pede substitute don sa green na capacitor, ala ako kasi makita dito sa area namin, saan kayo nakabili sa manila area guys?...Tanong ko na din kung pano gamitin yung unlock button? TIA

 

[vipervenom]

anu po gamit nyo software paragawa ng pcb mga sir?

 

[jennrhanz05]

@galeian sa Tingin ko Ok lang nman eh pero baka kac pag solder mo ung Insulator ng UTP maka matunaw sa Ini ng Solder mo at ito pa magiging dahilan ng shortage sa circuit.., kau na huh bahala hehe basta gamitin nyo ung Video tut para sa pag make ng DIY Flasher for More info ng Length wires at legs ng mga Electronic Parts.., =)

@psycopper sa deeco at raon ka maghanap.., =)

@vipervenom Meron ako nakita dito sa SB na thread about sa Mga PCB layout na software. nakalimutan ko lang if ano title ng Thread nya search ka nlang uh.., =)

sa lahat ng gagamit ng PCB make sure lang huh ung Distance per E.Parts ay di masxadong Malau para di masayang ung Effort nyo baka Parrity Error ung Lalabas..,

 

[MrDebrey]

NICE!

 

[palpalores]

Thanks Dito WORKING 100% hehe

 

[jennrhanz05]

Thanks Dito WORKING 100% hehe

congratz sau bro!!

 

[041989]

bm ts tnx. .

 

[mhoerichard]

Magtulungan nlang poh tau...,

Base lang poh to sa Idea ko at tulong ng Ibang Forum Sites at Specially kay sir "Jonathan"

How to make DIY LPT SPI Flasher na 100% sure na magwowork??

Here's The Diagram

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/SPIFlashProgrammer_zpsd59de428.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/SPIFlashProgrammer_zpsd59de428.jpg[/URL][/URL]

[url]http://i1363.photobucket.com/albums/r717/jennrhanz05/untitled_zps5256e82b.jpg[/URL]

Pinalitan ko poh lahat ng value ng resistors nyan kac poh minsan di madedetect ung WAN_IC nyo pag gagamitan mo ng matataas na value ng resistors Parity Error ang Lalabas....,

" NOTE : Plz Compare This Diagram sa Taas..Sa Mga Nahihirapan dun sa Diagram, Ganito Ung Itsura Ng Mga NEEDED Electronic Parts Ng Nasa Above Diagram... "

Ito Ung Gamit ko ngaun 2.92 Volts ung Output..
[url]http://i1363.photobucket.com/albums/r717/jennrhanz05/LPTFlash292Volts_zps678bea91.jpg[/URL]


If Gusto nyo Poh Exact 3.3 Volts Ung Supply Palitan lang Ung Resistor sa LM317T
[URL=http://s1363.photobucket.com/user/jennrhanz05/media/LPTFlash33Volts_zpsfe4cafbf.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/LPTFlash33Volts_zpsfe4cafbf.jpg[/URL][/URL]


Ito Po Ung Ginawa ko Medyo Untidy lang poh Atleast Working poh to

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/Front_zpsc07aeacf.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/Front_zpsc07aeacf.jpg[/URL][/URL]

[url]http://i1363.photobucket.com/albums/r717/jennrhanz05/Back_zpscb3c78f3.jpg[/URL]

Pag ready na poh ung DIY SPI Flasher Nyo..Its Time to Baklas ang inyong WAN_IC gamit ang Hot Air..,
NOTE: Ingat lang Poh sa Pag gamit ng Hot Air baka Masunog ang WAN_IC

BM622i WAN_IC
[URL=http://s1363.photobucket.com/user/jennrhanz05/media/Huawei-bm622i_zpse4b34eee.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/Huawei-bm622i_zpse4b34eee.jpg[/URL][/URL]
[URL=http://s1363.photobucket.com/user/jennrhanz05/media/chip_zps14e7b4af.png.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/chip_zps14e7b4af.png[/URL][/URL]

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/BM622i-05_zps7b057945.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/BM622i-05_zps7b057945.jpg[/URL][/URL]

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/4a17ae3a-ec13-4786-9d68-3335d93fb6bc_zps8916a852.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/4a17ae3a-ec13-4786-9d68-3335d93fb6bc_zps8916a852.jpg[/URL][/URL]

After Nyo Poh Matanggal ung WAN_IC sa CPE Board nyo lagyan nyo nlang poh ng ganito ung WAN_IC nyo at ung CPE Board ng Modem para madali ang pag Baklas nyo pag MaBlank Wan kau Ulit

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/dip8_edit_zps6c81810e.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/dip8_edit_zps6c81810e.jpg[/URL][/URL]

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/nochip_zpsfcfd5fcf.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/nochip_zpsfcfd5fcf.jpg[/URL][/URL]

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/dip8ic_edit_zpseb7b5289.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/dip8ic_edit_zpseb7b5289.jpg[/URL][/URL]

Pag Ok na poh ang Lahat at ready na ang DIY LPT Flasher mo at ung WAN_IC mo TIME TO FLASH Napoh Tau...
BM622i 2010 MAC then ito rin BM622i 2011 MAC at gamit ang Hex Workshop

Edit mo nlang poh d2 sa Offset nato 524282 Line 7FFFA ang MAC ng BM622i...Control + G ka nlang pra shorcut sa "Go to" then click mo ung Hex...jan mo makikita ang MAC ng BM622i 2010 at 2011

EXAMPLE lang poh to!!

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/Hex_zpsf9badcbc.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/Hex_zpsf9badcbc.jpg[/URL][/URL]


BM622 WAN_IC

Same Then Gawin Nyo..Lagyan Ng Socket IC Ang CPE Board Ng Modem At Ung WAN_IC

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/bm622_zps92524ce2.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/bm622_zps92524ce2.jpg[/URL][/URL]

[URL=http://s1363.photobucket.com/user/jennrhanz05/media/bm622_wan_ic_zps7a293442.jpg.html][url]http://i1363.photobucket.com/albums/r717/jennrhanz05/bm622_wan_ic_zps7a293442.jpg[/URL][/URL]

[url]http://i1363.photobucket.com/albums/r717/jennrhanz05/nm622_wan_ic_zps0756f81f.jpg[/URL]

Di Nyo Poh Magagamit ang Hex Wokshop sa BM622 sa dahilang di mo poh Makikita ung MAC dun.. Download nyo nlang poh to and continue reading BM622 MAC ....

Download This Sofware For Reflashing Your WAN_IC

STEPS

1. copy mo sa C:\WINDOWS\system32 ang file na to -->> IOPERM.DLL

2. If windows XP ka run mo cmd
If windows 7 nman dapat run as Administrator mo

3. Type cd C:\Documents and Settings\jennrhanz\Desktop\SPIPGM

wag kalimutan ung " cd " sample poh ung sa taas magkaiba tau ng user..sakin kac jennrhanz PC ko at
sa desktop ko kac extract ung SPIPGM.zip na download ko pra madaling makita..=)
nasaloob na lahat ang kailangan mo...extract lang sa desktop.....

4. Type spipgmw

5. Type spipgmw /i

to know if detected ung chip mo...,pag FFFF00FFh - parity error!
may mali sa connection mo...plz recheck at make sure talaga na tama ginawa mo baka masunog ung WAN_IC

6. Type spipgmw /u

To Unlock WAN_IC...
ONLY!!! connect PIN 3 to PIN 7 and 8 ng WAN_IC if needs Unlocking..,

7. Type spipgmw /e
to erase WAN_IC

8. Type spipgmw /r 0x0 2400

para mlaman mo if naerase ang lahat ng nasa WAN_IC..dapat lahat ay " FF FF FF "

9. Type spipgmw /i

again to check if detected parin WAN_IC mo..
If detected....

10. Type spipgmw /p FileNaDownloadMo.bin

w8 hanggang matapos ang pagflash...wag galawin ang PC.. =)

11. Lastly Type spipgmw /v FileNaDownloadMo.bin

To verify if the same sa FileNaDownloadMo.bin at ang laman ng WAN_IC mo...
If 100% the same kabit mo na WAN_IC mo sa Modem
If may Error poh...repeat steps above...,


Video Tut For WAN_IC Flashing or Download Video

Video Tut For LPT Flasher Making or Download Video


NOTE : Meaning poh ng FilenaDownloadMo.bin ay ung mga file na ito -- >BM622i 2010 MAC BM622i 2011 MAC BM622 MAC


Dahil Sa Hirap or Wala Talagang Board Para sa IC To Ung Gawa ko.., Download Here =)


Ito Nman Poh Gamit Kong Firmware Protection For My BM622.., credits sa nka discover...
View attachment 759312 View attachment 759605 View attachment 759606 View attachment 759607 View attachment 759608

My Modem =)
View attachment 759224

sample ito ung bios_ic ng Asus P5KPL ko na nka Locked
View attachment 760338

sample nman ito ng bios_ic ng Asus P5KPL ko na nka Unlocked
View attachment 760339


Sana Na Help ko kau guyz =)

If you are doubting my work Don't Visit My Thread and Bragging Nonsense of My Work,,I am doing this to all of YOU who Blank_Waned their BM622 or BM622i to repair Your Modem The CHEAPEST WAY....

By The Way To all Haters Of My Thread,, I Am Not Like The Others Posting Nonsense In This SITE... This Help Thread is 100% Working,,, I Will never Post Anything That May Cause Damages Of Your Modem.

I Posted My Thread With Effort and Time,, Do Everything To Answer Your Questions..

Thank You And Respect My WORK!!

"Note: I Am Not Responsible For Any Further Damage Of Your Modem"​

sir pano ko po malalaman kung blank wan ang wimax ko? saka pwede po ba to sa bm622m 2012.
saka po pag disconnected na po yung wimax..
blank wan na po ba kagad yun. kasi po di po ako maka log in sa gui...

 

[jennrhanz05]

di ko pa toh nartry sa 622m wla pa kac ako nun haha =)

ano poh ba Unit mo?? di nman blank wan pag discon kana..,

 

[boyboy]

tanong lg po...

ang push-to-unlock switch po ba ay dapat continuous na nakaclose (ON state) while doing spipgmw /u procedure..??? or one time press (ON) then release (OFF) lg po..???

salamat...

i already bought the components, ready to etch na...

just making sure lg po...

salamat sa pagshare...

 

[jennrhanz05]

Press Unlock Button while performing spipgmw /u simultaneously then release when successfully Unlock =)

 

[maegun]

sir pagganito pwede ko po ba gamitan ng ganyan. unidentified network kasi napalitan yung ipv4 default address .ito oh

 

[Debric]

Sige po TS try ko i rekta ang wan ic, verification process is 100% ok...if may error man inuulit ko ulit yung pag program...bale erase muna then program then verify...

Sensya na po now lang reply kasi busy din sa work TS...

Update kita TS pag ano resulta sa gagawin ko...

Thanks sa reply...

 

[051591]

napakagaling ts!! and very helpful sa lahat!! salamat dito!!