What's new
Symbianize Forum

Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.

All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!

BM622M 169 ip Solution HERE

mas maganda ma post lahat solution ng 169 IP, ginawa na kasing negosyo ung pang reremote at gawing 169 ung modem, para my kita rin ung taga ayos. ok sana mag share ung iba ng solution :D
 
scapers01 said:
Mga ka SB ngaun palang ako mag sheshare.. share ko lng ang kunting xperience ko about 22m 169 ip

Meron kc akong 22m 169 ip no getway ginawa ko lahat ng TUT static ip tanggal kabit etc..
pero sa kasamaang palad hnd ko parin mapa disco ang signal light..
isang linggo ko na ginagawa pero ayaw talaga so ginawa ko pinag pahinga ko muna utak ko :lol:

last day may nag pm sken na isang ka SB tinanung ako kung ok na ba raw ung 22m ko sabi ko hnd pa..
sabi nya try ko daw sa ibang lan card so napaisip ako dali dali ko tiningnan ung lan card ko kung anu model tapos tiningnan ko din ung build in lan ng isang pc ko kung mag kaparehas so mag ka iba sila ng model so try ko dun mag flash using winspreader aba 1click lng nag blink na agad ung signal light medyo tuwa na ako :lol:

Tools: Credit sa mga Gumawa
Winspreader
GP FIRMWARE
622M 2013 FW
622M 2012 FW
Vintage Solution

Procedure:

Unplug Modem
Open Winspreader
Select GP Firmware
Select ur Lan Ethernet
Click Start
Plug Lan Cable
Plug Power Cable

Hintayin gang mag Blink ung Signal Light
After 2 to 3mins Pag nag Blinking na ung Signal Light Ibig sabihin Compatible ung Lan Ethernet mu Pag hindi nag Blink Try ka ng ibang Lan card or Ibang PC na may build in lan..
Next tama ung Lan Ethernet mu nag Blink na ung Signal Light.. Pag tapos na ung Uploading ng FW ng GP ung 2,3,4 na Led Light naka steady lng ung 1,5 salitan nag Bblink ibigsabihin nun success ung Uploading ng GP FW matuwa kana kc malapit mu na magamit ung 22m mu :yipee:

The unplug power cable
stop or close Winspreader
Plug power cable
Tusukin mu ung reset sa likod para mag hard reset mag rereboot yan pag success na hard reset na
Unplug ulit ung power cable then plug mu ulit
punta ka CMD
type:
ipconfig/all
tingnan mu kung d na 169 ip mu pag 169 parin restart pc ka after restart 10.1.1.254 na ip nyan
Punta ka Cmd
type:
ipconfig/flush dns [enter]
ipconfig/release [enter]
ipconfig/renew [enter]

check mu sa gui kung napapasok mu ung gui ng gp type 10.1.1.254 pag lumabas ung gui ng gp success ang pag flash mu sa GP FW so next step tau
Flash mu muna sa 622m 2013 4 sure lng naman la naman mawawala :lol:

Kung anu ung procedure ng pag Flash ng GP FW same lng din sa 622M 2013 at 2012

ito ang pala tandaan kung success ung pag upload ng FW ng 2013 at 2012 ang ilaw lng ay 1,4,5 ibig sabihin nyan success ung pag Flash mu

uulitin ko same lang po ang procedure na gagawin nyo sa pag flash ng 2013 at 2012 FW

pag tapos ng lahat ng pag paflash.. 2012 na ulit ung 22m nyo log in kana sa gui pag vintage po ung date anjan na po ung link kung panu gawin dapat po working mac ung lalagay nyo para mawala rin ung vintage un lng po...

cnxa po medyo mahaba ung kumpisal ko :lol:

sana po makatulong sa mga 169 ip jan
Click to expand...


d boss nag disco ligth kahit anung gawin eh
 
Last edited:
check mo yung lan status kung nag "X" agad.. pag ganun, flashing tru hynix na yan :salute:
 
View attachment 198722

bos bakit d ma hard reset yung bm622m 2013 ko po at d rin nag blink katulad ng na post nyu
 

Attachments

  • Ashampoo_Snap_2015.01.06_17h00m05s_001_.jpg
    Ashampoo_Snap_2015.01.06_17h00m05s_001_.jpg
    145.2 KB · Views: 8
scapers01 said:
Mga ka SB ngaun palang ako mag sheshare.. share ko lng ang kunting xperience ko about 22m 169 ip

Meron kc akong 22m 169 ip no getway ginawa ko lahat ng TUT static ip tanggal kabit etc..
pero sa kasamaang palad hnd ko parin mapa disco ang signal light..
isang linggo ko na ginagawa pero ayaw talaga so ginawa ko pinag pahinga ko muna utak ko :lol:

last day may nag pm sken na isang ka SB tinanung ako kung ok na ba raw ung 22m ko sabi ko hnd pa..
sabi nya try ko daw sa ibang lan card so napaisip ako dali dali ko tiningnan ung lan card ko kung anu model tapos tiningnan ko din ung build in lan ng isang pc ko kung mag kaparehas so mag ka iba sila ng model so try ko dun mag flash using winspreader aba 1click lng nag blink na agad ung signal light medyo tuwa na ako :lol:

Tools: Credit sa mga Gumawa
Winspreader
GP FIRMWARE
622M 2013 FW
622M 2012 FW
Vintage Solution

Procedure:

Unplug Modem
Open Winspreader
Select GP Firmware
Select ur Lan Ethernet
Click Start
Plug Lan Cable
Plug Power Cable

Hintayin gang mag Blink ung Signal Light
After 2 to 3mins Pag nag Blinking na ung Signal Light Ibig sabihin Compatible ung Lan Ethernet mu Pag hindi nag Blink Try ka ng ibang Lan card or Ibang PC na may build in lan..
Next tama ung Lan Ethernet mu nag Blink na ung Signal Light.. Pag tapos na ung Uploading ng FW ng GP ung 2,3,4 na Led Light naka steady lng ung 1,5 salitan nag Bblink ibigsabihin nun success ung Uploading ng GP FW matuwa kana kc malapit mu na magamit ung 22m mu :yipee:

The unplug power cable
stop or close Winspreader
Plug power cable
Tusukin mu ung reset sa likod para mag hard reset mag rereboot yan pag success na hard reset na
Unplug ulit ung power cable then plug mu ulit
punta ka CMD
type:
ipconfig/all
tingnan mu kung d na 169 ip mu pag 169 parin restart pc ka after restart 10.1.1.254 na ip nyan
Punta ka Cmd
type:
ipconfig/flush dns [enter]
ipconfig/release [enter]
ipconfig/renew [enter]

check mu sa gui kung napapasok mu ung gui ng gp type 10.1.1.254 pag lumabas ung gui ng gp success ang pag flash mu sa GP FW so next step tau
Flash mu muna sa 622m 2013 4 sure lng naman la naman mawawala :lol:

Kung anu ung procedure ng pag Flash ng GP FW same lng din sa 622M 2013 at 2012

ito ang pala tandaan kung success ung pag upload ng FW ng 2013 at 2012 ang ilaw lng ay 1,4,5 ibig sabihin nyan success ung pag Flash mu

uulitin ko same lang po ang procedure na gagawin nyo sa pag flash ng 2013 at 2012 FW

pag tapos ng lahat ng pag paflash.. 2012 na ulit ung 22m nyo log in kana sa gui pag vintage po ung date anjan na po ung link kung panu gawin dapat po working mac ung lalagay nyo para mawala rin ung vintage un lng po...

cnxa po medyo mahaba ung kumpisal ko :lol:

sana po makatulong sa mga 169 ip jan
Click to expand...



sir pahelp din po 169 din po yung bm622m ko na naka gp firmware ...no gateway hindi ko po mapablink yung signal ligths sinundan ko naman po yung tutu mo....thanks inadvance....
 
paandarin nyo lng winspreader tapos pili kayo ng firmware nyo tapos start . saksak lan at power . Ganun lang wait for about 5 minutes at walang nangyari hugutin nyo lang power at for 15 secs then saksak nyo ulit . Ganyan lang No bullshit . Wag kayo naniniwala sa mga ipconfig commands nayan at mga paraan na una daw huhugutin ang LAN o de kaya kailangan daw atheros . Walang pinagkaiba yun :rofl: :rofl: :rofl:
 
nice tread sir thanks
usfull info mo bookmark ko mona
:thumbsup::band:
 
parehas tau boss may solution na daw ba?.. waiting pa ako kasi ung akin kumgat ung GP tapos natulala, tapos 169 parin sya..
 
eto naka buhay sa toy ko hirap lang mag timing bumubukas kasi pag open ng toy then close agad kaya NOTE: timing lang po!

Set amorphous = CreateObject("WScript.Shell")

amorphous.run"cmd"
WScript.Sleep 200

amorphous.Sendkeys"echo off{Enter}"
WScript.Sleep 200

amorphous.SendKeys"telnet 192.168.254.1{Enter}"
WScript.Sleep 200

amorphous.SendKeys"Firefly{Enter}"
WScript.Sleep 200

amorphous.SendKeys"$P4mb1h1r4N4m4nT0!!{Enter}"
WScript.Sleep 200

amorphous.SendKeys"apinfo > /etc/default.cfg{Enter}"
WScript.Sleep 200

amorphous.SendKeys"sncfg commit{Enter}"
WScript.Sleep 200

amorphous.SendKeys"sncfg reset{Enter}"
WScript.Sleep 200

amorphous.SendKeys"sncfg default{Enter}"
WScript.Sleep 200

amorphous.SendKeys"reboot{Enter}"
WScript.Sleep 200

***********************pag23m try mo para normal mong ma edit yung wifi

Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500

cloner.SendKeys"color a"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"telnet 192.168.254.1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"Firefly"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"$P4mb1h1r4N4m4nT0!!"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"cd /etc"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"rm default.cfg"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset pw_static_model 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LAN_ETH_PORT_NUM 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LEDBUTTON_TIMER_INTERVAL 125"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset VOIP_CH_NUM 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset SLIC_TYPE 321760"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset GPIO_MAP 0,-1,2,15,24,12,11,25,10,-1,-1,-1,-1,-1,13,14"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset GPIO_INVERSION 32772,0"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_ENABLE 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_SERVER_AUTH MD5"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_CLIENT_AUTH MD5"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_INTERVAL_ENABLE 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_INTERVAL 3600"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WAN_MAC_ENCRY 34CDBEC9E69C"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WAN_MAC 34:CD:BE:C9:E6:9C"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LAN_MAC 34:CD:BE:C9:E6:9D"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WMX_FREQ_LIST 2507500,2602000,2612000,2622000,2638000,2505000,2510000"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg reload"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"/factoryreset.sh"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000
 
Last edited:
Hello to all bosing in SB. 1stime ko po dito sa SB kaya cnxa na po need ko lang po ng mga help ninyu. Mga bosing same problem din po dito. I have bm622m 169 ung ip at wlang ilang ung signal nya na try ko narin po ung ibat ibang mga tools like winspread pero wa epek still blingking lang ung lan led at ilang bisis kona unplug at plug ganon parin. Mga bosing may pag asa paba modem ko? Kac sayang namn bili ko nito 5k isang bwan ko plang na gamit di ko narin ma contact ung nag binta sakin. Pls help naman po mga bosing. Gagana pa kaya to mga bosing? Anu ba dapat gawin para gumana lang. Thanks and more power.....
 
Chances lang magawa yung ibang 169. Skin naireflash ko yung 169 ko kso stock led lights siya at ayaw mareset.
 
ayw dn saken mga k sb n try ko n lht ng klase lancrd ibang klase pc mataas n specs o ayw tlga wla nba solution dto
o p reflash ko nlang cno tga Sapang palay dto nag aaus ung mura lang
 
sanamakita said:
sim probs tau boss:upset:
Click to expand...

watis said:
Chances lang magawa yung ibang 169. Skin naireflash ko yung 169 ko kso stock led lights siya at ayaw mareset.
Click to expand...

hahaha wala yan mga boss sa akin na flash ko na rereboot ko pa nga eh ,,pero boom 169 parin,,lahat ng fw pag ginamitan ko wisper nag didisco lahat pero wala talaga 169 parin!
 
You must log in or register to reply here.

Similar threads

foxboy
YouWin R01 Red light Repair 192.168.254.254 ip
Replies
6
Views
1K
ceasar elite hacker
C
T
[HELP] Active Directory Connection
Replies
1
Views
285
takash07
T
Dmerl09
HELP: MODEM HUAWEI B315s-936 (NO POWER& WIFI LED LIGHT)
Replies
13
Views
2K
abet90
abet90
K
936 master pls advice me😣😣😣😣😣😣
Replies
7
Views
369
gerald janua
gerald janua
L
OpenVPN Client with Web Interface in B525 Stable
Replies
12
Views
4K
roeljay111
roeljay111
Back
Top Bottom