BM623m Trying to Downgrade using Winspreader 7

[junpenas]

Thanks......................................................................................................................

 

[brave_rhed]

ito po ginawa ko sa 23m ko

View attachment 177592

1. Open winspreader
2. browse your firmware, select firmware like BM622m_V100R001PHLC08B016_A.tar or BM622m_V100R001PHLC08B017_A.tar
3. select where network adaptor located your modem
3. then turn off your modem as in plug out the power adapter
4. plug in lan cable to your pc while your modem is off
5. click start on winspreader with 2 sec
6. then plug in the power adaptor of your modem
7. then tingnan mo yung modem kung tumatakbo your signal led
8. pag nag stop na dancing light your signal led ok na yan
9. hard reset o yung modem
10. then access mo modem baka nag vintage date sya gamitan mo lang ng script

ito copy paste mo sa notepad then save as to xxxxx.vbs
palitan mo lang ng mac mo yung mac na naka color RED


Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500

cloner.SendKeys"color a"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"telnet 192.168.254.1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"Firefly"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"$P4mb1h1r4N4m4nT0!!"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"cd /etc"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"rm default.cfg"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset pw_static_model 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LAN_ETH_PORT_NUM 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LEDBUTTON_TIMER_INTERVAL 125"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset VOIP_CH_NUM 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset SLIC_TYPE 321760"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset GPIO_MAP 0,-1,2,15,24,12,11,25,10,-1,-1,-1,-1,-1,13,14"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset GPIO_INVERSION 32772,0"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_ENABLE 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_SERVER_AUTH MD5"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_CLIENT_AUTH MD5"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_INTERVAL_ENABLE 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_INTERVAL 3600"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WAN_MAC_ENCRY 346BD3XXXXXX"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WAN_MAC 34:6B3:XX:XX:XX"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LAN_MAC 34:6B3:XX:XX:XX"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WMX_FREQ_LIST 2507500,2602000,2612000,2622000,2638000,2505000,2510000"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg reload"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"/factoryreset.sh"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

 

[junpenas]

Thank you my friend for your response. tc

 

[mhel2k9]

ako, need help po... sa kakahanap at kakatesting ko po ng pag DG ng 23m ko.. ayun po no gui, no signal na sya.. pero same ip parin po 192.168.254.254 pa help naman po.. pano mabuhay to.. TIA

 

[lekiz121]

base on my experience. pag nag greenpacket kayo 1st and then bm622m mag rereboot po palagi ang 23m. eto gawin mo

open telnet pag nasa 22m kana then type mo to

apinfo > /etc/default.cfg
sncfg reset
reset
sncfg commit
sncfg reload
/factoryreset.sh


yan maging 192.168.254.1 na ip mo after reboot

 

[luiscordero]

<help> Same po kami ng problem ni mhel2k9, patulong po nawala na signal ng modem kahit mag reflash ako ala na blinking, pag chinechek ko ip sa network and sharing center while flashing firmware eh 169 po xa pero pag ni reboot ko back to 192.168.254.254 no signal, kahit hard reset wala signal lumalabas

 

[virus80]

panu po sir mag dg ng 22m 2013 to dv sir sna my matulongn nyo ako salamt po