Brother J100 Machine Error 46

[Likenss]

Mga bossing yung brother J100 pag turn on lalabas yung error message na Ink Box Full. Ngayon e rereset ko sana. before ko plug in and printer sa electrical outlet pindok ko muna yung menu tpos saksak sa electrical outlet. Lumalabas yung machine kaso after 1 sec. lalabas agad yung machine error 46. noong na check ko sa PURGE 00000 yung value. try kung e reset kaso machine error 46 talaga yung lumalabas.

Sana matulungan ninyo ako dito sa problema ko. ty

 

[Snabero13]

Mga bossing yung brother J100 pag turn on lalabas yung error message na Ink Box Full. Ngayon e rereset ko sana. before ko plug in and printer sa electrical outlet pindok ko muna yung menu tpos saksak sa electrical outlet. Lumalabas yung machine kaso after 1 sec. lalabas agad yung machine error 46. noong na check ko sa PURGE 00000 yung value. try kung e reset kaso machine error 46 talaga yung lumalabas.

Sana matulungan ninyo ako dito sa problema ko. ty

parehas tayo boss naayus mo na ba?

 

[xianzz]

same din sa akin mga boss up up lang po sa mga master sa printer lalo na sa brother pirnter

 

[jhanjhanasiong08]

Reset counter po


To get started turn the machine on and wait for it to start up.
Press the Set/OK button, then Menu, then Mono Start followed by the up arrow key four times. These buttons have to be pressed independently and should be done in rapid succession. If you have done this stage right you should be presented with the word ‘maintenance’.
Using the Up/Down arrow keys select the number 8 and then press Set/OK. Then select the number 0 and then press Set/OK.
At this point we need to get in to the Purge option which, depending on the machine will either be a case of pressing Mono Start repeatedly or using the Up/Down arrow. We recommend trying one method and if it isn’t right for your machine turn the printer off and back on again, start the process from the beginning then try the second method.
Once PURGE is on the screen (usually the word purge will be followed by a reading indicating how much ink has been deposited) use the up/down arrows and the set/ok key again to enter the numbers 2, 7, 8 and then 3 on the screen.
The number after PURGE should now reset to zero. Press the Stop/Exit key to go back to the main maintenance mode menu.
Using the up/down and SET/OK keys enter 9 and then 9 again to exit maintenance mode.

 

[knowledgebase]

parehas tayo boss naayus mo na ba?

Sir madali lang yan sundin mo lang to same lang ang process na to sa mga brother na T series..

https://www.youtube.com/watch?v=76wYaBQ_EPI&t=56s

sana po wag nyong kalimutan mag subscribe sa channel ko hehhee

Thanks in advance...

Kung may katanungan kayo tungkol sa ibang problema ng printers nyo comment lang doon sa mga video ko...


Thanks...

 

[kram77]

reset muna paps

 

[ligh15]

may hindi pa kayo na reset jan. bukod sa purge may nirereset pang iba jan .. try nyung i explore yung mga naka list sa maintenance mode nyu.