CANON ip2770 ayaw mag service mode pa help

[Bhadz33]

Mga Ka-Symbianize

baka may nakaka alam kung paano i service mode ung canon ip2770 bukod sa paraan na to

Solution for this problem is reset printer.
How to reset Canon Pixma iP2770 eror 5B00, follow instruction bellow;
1. Turn off printer
2. Press and hold RESET button
3. Press and hold POWER button.
4. Released RESET button, POWER still pressed
5. Press and released RESET button 5 times
6. Released POWER button
Now, printer on SERVICE MODE condition. In this condition, computer detect found new hardware.
7. When computer detect FOUND NEW HARDWARE, wait about 20 seconds and press CANCEL
8. Open software resetter Canon Pixma iP2770 - download Re-setter Canon Pixma iP2770
9. Set Destination - Region : select region - SET - OK
10. Load paper = 1 sheet
11. Clear Ink Counter - SET - OK
Wait, the printer will print D=000.0
12. Ink Absorber Counter - SET - OK
13. Reset iP2770 is done, now turn off printer.

kasi ayaw gumana eh.

TIA mga Ka-Symbianize

 

[ecks2910]

Dapat ma clear mo muna ang error nyan.. mag palit ka muna ng ibang cartridge black and colored, baka kc detected ng printer na empty cartridge na sya. o kaya hold press mo yung rest button alisin mo plug sa outlet then wait mo 10 sec. isaksak mo ulet dapat ma clear yung error.. Sana makatulong

 

[jaysonalfiler26]

Dapat ma clear mo muna ang error nyan.. mag palit ka muna ng ibang cartridge black and colored, baka kc detected ng printer na empty cartridge na sya. o kaya hold press mo yung rest button alisin mo plug sa outlet then wait mo 10 sec. isaksak mo ulet dapat ma clear yung error.. Sana makatulong

same sakin ayaw gumawa yung 5 time na press yung resume pero pag 4 times lang napasok xa sa service mode kaso lang yung service tool may "error 006" help naman guys