Computer repair (post your pc problems) we can help you

[lhorwin17]

i need a help plss!!! kulang poh ng driver ang loptop koh,, acer aspire 3050 poh cya... windows 7 ultimate.,, WALA poh AKOng PCI FLASH MEMORY DRIVER.. HELP PLSSS!!! TNX IN ADVANCE!!!

Hi Sir google nyo lang po drivers for acer aspire 3050 you should get a list of all drivers for your motherboard, another thing is before formatting your hard drive install driver max, then use it to back up ur drivers to an external source. after formatting install driver max ulet and use it to import from external source such as usb,hard drive

Thanks

 

[Maureace]

gud am TS meron lang me ask. meron kasi me problem yong pc ko naghahang if gumagamit ako ng dsl then someone told me to transfer it to another slot yong LAN card. pang 2 times ko na napalitan LAN ko kasi nasira ang built it. eh ganoon pa din, at first ok pa cya den bigla naglang ganon. pag inayos namin ok later hang na naman. sa kakaayos namin na dagdagan na naman problem namin. yong monitor ko na luma crt pa eh nagbiblink nalang. di ko masabi video card sira kasi tinry namin sa built in na video card ganon pa din. kaya 2loy di namin makita ano na nagyayari sa pc ko if ok ba dahil sa ayaw mag display ng monitor. Ano kaya sira noon TS. salamat po. naging hamon tuloy sa amin ito na di gaano marunong magtroubke shoot.

 

[lhorwin17]

2ng notebook pc ko na HP Mini 110 ayaw ma-installan ng Windows.
Ang nangyayari po pag iinstalan ko ng Windows 7 ay may mag-aapear na command promtp tapos pag magtype po ako ung letter ay magiging ganito (e.g. pag tinatype ko letter t ganito magpapakita ^T). pag sa ubuntu naman ay pwede po. at pag sa xp naman ayaw po magtuloy magblu-blue screen yung monitor ko. ano kaya magandang solution para dito. Thanks po sa makakatulong!

Hi sir, please make sure (x86) 32 bit ang installer nyo. another thing to make sure is to format all logical drives first before deleting it. then create your logical drives. and format again for the 2nd time. then proceed with the installation on any of your drives

 

[hotlola]

bozz ask ko lng po, pano gawin yung dalawang pc mgkaconnect, ex. mglalaro ng lan games yung dlawang computer, pano po gumawa ng connection, tnx in advance

 

[chip]

sir help naman poh..gusto kuh sana disable eung Ctrl+alt+det ng computer kuh..hnd kuh poh madisable sir ehh...

try mo po ito

For Windows XP, follow these steps:

1. Log on to the computer as an administrator.
2. Click Start, click Control Panel, and then double-click User Accounts.
3. Click Change the way users log on or off.
4. Click to select the Use the Welcome screen check box if you want to disable the CTRL+ALT+DELETE sequence.
5. Click Start, click Run, type Control Userpasswords2, and then press ENTER.
Note You may receive the following dialog box:
You must be a member of the Administrators group on this computer to open User Accounts. You are logged on as user name, and this account is not a member of the Administrators group.
In this condition, you are required to type the user name and password when the system prompts the dialog box to type the user name and password of the administrator of the computer.
6. Click the Advanced tab.
7. In the Secure logon section, click to clear the Require users to press Ctrl+Alt+Delete check box if you want to disable the CTRL+ALT+DELETE sequence.

For Windows Vista and Windows 7, follow these steps:

1. Click Start, type Control Userpasswords2, in the Search box and then press ENTER.
Note You are required to type the user name and password when the system prompts the dialog box to type the user name and password of the administrator of the computer.
2. Click the Advanced tab.
3. In the Secure logon section, click to clear the Require users to press Ctrl+Alt+Delete check box if you want to disable the CTRL+ALT+DELETE sequence.

 

[chip]

gud am TS meron lang me ask. meron kasi me problem yong pc ko naghahang if gumagamit ako ng dsl then someone told me to transfer it to another slot yong LAN card. pang 2 times ko na napalitan LAN ko kasi nasira ang built it. eh ganoon pa din, at first ok pa cya den bigla naglang ganon. pag inayos namin ok later hang na naman. sa kakaayos namin na dagdagan na naman problem namin. yong monitor ko na luma crt pa eh nagbiblink nalang. di ko masabi video card sira kasi tinry namin sa built in na video card ganon pa din. kaya 2loy di namin makita ano na nagyayari sa pc ko if ok ba dahil sa ayaw mag display ng monitor. Ano kaya sira noon TS. salamat po. naging hamon tuloy sa amin ito na di gaano marunong magtroubke shoot.

nagkakaganyan po kasi ang pc kong hindi kayo nag-anti static muna bago kayo humawak na mga hardware. tendency po niyan imbes na makaayos kayo, lalo masisira. cguro need nyo po update lahat ng drivers niyo before niyo check kong may tama ang mobo nyo. goodluck po

 

[lhorwin17]

Help po sa pc desktop ko..when i turned on my pc walang display na lumalabas sa monitor..anu kaya problema nun? Videocard bh yung problem?

Hi sir,
5 possible problems po

1.video card
2.mother board
3.processor
4. Power supply
5. Ram

solutions
take out your video card, plug ur vga cable to your internal video card,( vga slot un on ur motherboard) shoud it work ur video card is the problem

pag d parn gmana un baka motherboard nyo na cra, have you decide to reconnect ur heat sync and processor in the past? if its lose it can cause your motherboard to heat up and blow it within a month

processor, should u get up to the stage where it displays ur motherboard brand, thats ur processor stage. if error occurs on that you need to either apply thermal gel between ur heatsync and processor.

ram should it gives you 3 beeps noise.

this solutions are in order so please check out the first few. before attempting the other ones

 

[lhorwin17]

bozz ask ko lng po, pano gawin yung dalawang pc mgkaconnect, ex. mglalaro ng lan games yung dlawang computer, pano po gumawa ng connection, tnx in advance

hi sir you will need a router. atleast. or if both laptop u can easily set up an ad hoc network (temporary)

equipment:
routers
cat 6 utp (ethernet cable)

connect both pc/laptop into the routers LAN port (same colored interface)

on one pc go to start > accesories > command prompt

type in ipconfig

you should get your ip address,subnet mask and default gateway

now on any of your web browser(IE,mozilla or chrome)
type in your gateway its similar to 192.168.1.1

user name and password is usually admin admin, or admin password depending on ur routers

then under LAN configurations please see your DHCP table to get the address of computer/laptop ip address.

then on cmd or command prompt again. please attempt pinging the other computer. if u get a reply your computer are now seeing each other. a connection can be establish.

please complete step 1 then i can help you with setting up a rule in your firewall.

 

[unicojiho001]

those who has a problem in activating their copy of windows try this windows 7 loader. works great tried and toasted. add to your collection so that everytime you reformat you pc or laptop you have a tool to activate it. here it is:
http://sharecash.org/download.php?file=2479641

thanks.. try ko to

 

[benny]

sir may tanong po ako.pakisagot naman po lahat kung pwede lang po.yung hdd ko po ay 100gb.nung nagpa-install po ako ng OS nuon (di pa ako marunong mag-install ng OS) ay tinanong ako kung gusto ko ipa-partition hdd ko.sabi ko "sige" kaya yung 100gb ko naging 50gb sa drive C at 50gb sa drive D.makalipas ang 7 buwan nag crash ang OS ko sa drive C na primary drive ko kaya nag install nalang ako ng new OS sa drive D ko.sa kagustuhan kong ma-access pa ang hdd ko ay nag partition nanaman ako.yung drive D ko na 50gb ay pinarte ko sa dalawa.30/20.30gb sa D at 20gb sa drive E na bagong partition.kaya ang mga drive ko ngayon ay C, D, at E. ang tanong ko po ay paano ko maibabalik sa dati ang mga drive ko ng C at D lang? gusto ko kasing mabuo uli sa 50gb yung drive D ko....

 

[yet ow]

Sir,
help po, windows xp professional, service pack 3 version 2002 po ang unit ko..bigla pong may lumabas na "You may be a victim of software counterfeiting..Windows did not pass genuine Windows validation"..

 

[jdf47]

1.pentium 4 3.0
hdd-80gb
ram-2gb
video card 256mb
OS window7
2.
no sound ok naman mga adjustment pero no sound pa din, ok din speaker.
3.
THANKS

 

[badette1018]

gud day po...ask ko lng po kasi nireformat ko ung acer aspire ko na laptop pero naghahang cia palagi sa certain percent ung una sa 93% so ulet na naman aq ng process tapos sa 9% naman cia nag hang....pahelp naman po anu kaya posibleng reason..thanks po ng madami

 

[badette1018]

Sir,
help po, windows xp professional, service pack 3 version 2002 po ang unit ko..bigla pong may lumabas na "You may be a victim of software counterfeiting..Windows did not pass genuine Windows validation"..

try to follow this link..hope maka2long seu...
http://www.symbianize.com/showthread.php?t=349997&highlight=windows+xp+activator

 

[wildgirl82]

sir tanong ko lang ano po ba ang tama temperature cpu video card? tsaka ano application ang pwedi gamitin para makita ang temperature nila... bigla nlang kc minsan na auto start ang pc ko baka kc nag over heat kaya ganon ......

 

[yelrahz]

ts ayaw ma detect ang dvdrom na bago pa lng.. IDE na dvdrom.. duda ko po sa powersupply.. maliit lng ang wattafe ng powersupply ko..

 

[yet ow]

try to follow this link..hope maka2long seu...
http://www.symbianize.com/showthread.php?t=349997&highlight=windows+xp+activator

Tnx Ma'am Badette..^_^..try ko po..

 

[aznix2020]

pa help po, yung USB ko ayaw ma double click to open... Buffalo yung brand.. kailangan pa right-click tapos open para ma buksan... XP sp3. thanks. (wala pong virus.. khit ilang format ganun parin and yung ibang usb ok naman) thanks po.

 

[zeeir]

@zeeir and siafu08

Eto gawen mo jan​

--try mo muna isaksak sa desktop monnitor mo ung laptop mo kung naging ok naman sya then may sira na ung LCD cable ng notebook mo and need to replace na po ung part na yun. Kaya kelangan mo nang pumunta sa service center at ipapalit mo na ung LCD CABLE mo.

last option is BIOS UPDATE (reflash / update at your own risk if may knowledge ka sa pag-upgrade ng BIOS mo then dot this kung wala naman mas magandang ipaayos mo sa technician ang laptop mo. dahil maling update lang nito tiyak na papalitan na yan Motherboard mO!)pakibasa na lang sa readme kung including doona ng mga errors na mareresolve sa pag-update ng BIOS mo!




BOSS... Di po siya gumagana sa Monitor.. Gnun din ang Output niya.. THE SAME PArin SIR.. Update BIOS na Tlga b un? maayos pa kaya siya?

 

[bluthugs]

2ng notebook pc ko na HP Mini 110 ayaw ma-installan ng Windows.
Ang nangyayari po pag iinstalan ko ng Windows 7 ay may mag-aapear na command promtp tapos pag magtype po ako ung letter ay magiging ganito (e.g. pag tinatype ko letter t ganito magpapakita ^T). pag sa ubuntu naman ay pwede po. at pag sa xp naman ayaw po magtuloy magblu-blue screen yung monitor ko. ano kaya magandang solution para dito. Thanks po sa makakatulong!