Computer repair (post your pc problems) we can help you

[jom0222]

try mo muna e-default mga settings paps..then chek mo na rin, dapat makikita mo yung newly installed hard disk mo..

ayaw pa rin po sir..
pag naka plug na yung power sa hard disk ayaw talagang mag-on ng PC..

 

[tammy03990]

sir ask ko lng sa tuwing nag oopen ung pc ko biglang nag didisck check ung d partion ko panu ba e close un ung d lng nmn ung c partion ko eh hindi nmn tnx sa makakatulong..-

 

[Chyle]

another problem is di nagreread ng cd yung cd rom namin.. so pano ko gagamitin yung password remover nian? nagtry din ako gumamit ng external windvd kaso ayaw pag nilagay ko na pangformat na cd parang di niya yata nareread? what to do?

 

[Chyle]

another problem is di nagreread yung cd rom namin? paano ko gagamitin yung password recovery tool nun? tapos gumamit na ko ng external windvd, parang di rin naread yung pangreformat ng win xp. what to do? help po...

 

[xer028]

boss pa help, biglang namamatay yung unit.. bat ganun, okey naman yung psu.. pati yung proccessor,, bigla lang syang mamamatay

try mo icheck yung HEAR SINK.. baka hindi po nakalapat.. shutdown automatically ang Processor kpag nag Oover heat..

 

[xer028]

ayaw pa rin po sir..
pag naka plug na yung power sa hard disk ayaw talagang mag-on ng PC..

natry mo na po ba sa ibang terminal ng power supply?? baka hindi na po kaya ng PS. nyo.

 

[xer028]

sir ask ko lng sa tuwing nag oopen ung pc ko biglang nag didisck check ung d partion ko panu ba e close un ung d lng nmn ung c partion ko eh hindi nmn tnx sa makakatulong..-

kahit na nacancel nyo na po? next time ganun pa ba?

 

[mclerios15]

another problem is di nagreread yung cd rom namin? paano ko gagamitin yung password recovery tool nun? tapos gumamit na ko ng external windvd, parang di rin naread yung pangreformat ng win xp. what to do? help po...

baka yung cd mo may problema!! puro gasgas na ba?
will you please elaborate your problem

 

[xer028]

another problem is di nagreread ng cd yung cd rom namin.. so pano ko gagamitin yung password remover nian? nagtry din ako gumamit ng external windvd kaso ayaw pag nilagay ko na pangformat na cd parang di niya yata nareread? what to do?

use USB po.. USB boot.. (Xboot search nyo nlang po yang applicatio)

 

[tammy03990]

kahit na nacancel nyo na po? next time ganun pa ba?

ganun parin po every time na mag on ako ng pc.. matutulungan mo ba ako..

 

[tammy03990]

my isa papala ako tanung sa inyu ung router ko kc na inksys wireless-g broadband router
model-WRT54GL v1.1 ang ip niya ay 192.168.15.242 eto sira na kaya eto hindi pa eto ngamit ni minsan tas pag reset ko ayw bumalik sa default niya any

 

[xer028]

ganun parin po every time na mag on ako ng pc.. matutulungan mo ba ako..

try this one sir..

Using the Graphical User Interface (GUI)
Open the Start Menu and click Computer.
Right-click the drive you want to perform a check disk on and select Properties.
Click the Tools tab in the drive Properties window.
Click Check Now under error checking.
To perform a complete check of your hard drive for errors check off both options in the check disk window that pops up.
Click the Start button to start the process.
If you are trying to check a hard drive that has open files you’ll get a message similar to the one shown below.
Click Schedule disk check. Disk check can’t check a hard drive that has open files. Your computer will reboot and check the disk before Windows Vista boots up. If you want to cancel the scheduled disk check for any reason, check out this guide.

Using the Command Line Interface
Check Disk can also be run using the command line (DOS) prompt.
Open the command prompt with administrative privileges by typing cmd in the search box in the Start Menu and right-click cmd.exe in the search results and then select Run as Administrator.
Type chkdsk followed by one or a combination of switches listed below in the command prompt.

If you run the check disk (chkdsk) command from the command prompt by typing just chkdsk check disk will run in read only mode. All it does is check for errors. It will not fix any errors it finds unless told to do so. This is done by adding switches when typing chkdsk in the command prompt.
A switch looks something like chkdsk /F. Notice the switch /F after the chkdsk command.
Below is a list of most of the switches used with the check disk command. You can use one or a combination of switches with the check disk command.
D: If you want check disk to scan a drive other than the C: drive, add the drive letter after chkdsk to tell it to scan that drive. If the drive is called X: on your computer it would look like chkdsk X:.
/F: The /F switch is the most common of the chkdsk switches. It tells chkdsk to fix any errors it finds. Chkdsk can’t fix errors on a disk that has open files. If chkdsk asks you if you want to check the drive next time Windows Vista boots or dismount the drive choose to check the drive next time Windows Vista boots. Never choose to dismount the drive. That option should only be used by a professional.
/R: The /R switch tells chkdsk to attempt to recover any bad sectors of the hard drive if any are found. A bad sector is a spot on the hard drive that can’t hold saved data anymore.
/I: The /I switch tells chkdsk to perform a less detailed but faster disk check.
/C: The /C switch tells chkdsk to skip the checking of cycles within a folder structure which reduces the scan time. Don’t ask me what this means.
An example of an exhaustive disk check using the command line interface is:
chkdsk D: /F /R
The check disk command shown above will fix any errors it finds and also attempt to recover bad sectors of the D: drive if any are found.

This should resolve your problem.

 

[xer028]

my isa papala ako tanung sa inyu ung router ko kc na inksys wireless-g broadband router
model-WRT54GL v1.1 ang ip niya ay 192.168.15.242 eto sira na kaya eto hindi pa eto ngamit ni minsan tas pag reset ko ayw bumalik sa default niya any

try nyo po upgrade yung firmware ng Router, downloadable nman po yun FReE

 

[tammy03990]

try nyo po upgrade yung firmware ng Router, downloadable nman po yun FReE

pahingi nmn po ng link tnx.. kaso hindi ko ma accses ung default ip niya na 192.168.1.1 panu po ma upgrade un..

 

[tammy03990]

try this one sir..

Using the Graphical User Interface (GUI)
Open the Start Menu and click Computer.
Right-click the drive you want to perform a check disk on and select Properties.
Click the Tools tab in the drive Properties window.
Click Check Now under error checking.
To perform a complete check of your hard drive for errors check off both options in the check disk window that pops up.
Click the Start button to start the process.
If you are trying to check a hard drive that has open files you’ll get a message similar to the one shown below.
Click Schedule disk check. Disk check can’t check a hard drive that has open files. Your computer will reboot and check the disk before Windows Vista boots up. If you want to cancel the scheduled disk check for any reason, check out this guide.

Using the Command Line Interface
Check Disk can also be run using the command line (DOS) prompt.
Open the command prompt with administrative privileges by typing cmd in the search box in the Start Menu and right-click cmd.exe in the search results and then select Run as Administrator.
Type chkdsk followed by one or a combination of switches listed below in the command prompt.

If you run the check disk (chkdsk) command from the command prompt by typing just chkdsk check disk will run in read only mode. All it does is check for errors. It will not fix any errors it finds unless told to do so. This is done by adding switches when typing chkdsk in the command prompt.
A switch looks something like chkdsk /F. Notice the switch /F after the chkdsk command.
Below is a list of most of the switches used with the check disk command. You can use one or a combination of switches with the check disk command.
D: If you want check disk to scan a drive other than the C: drive, add the drive letter after chkdsk to tell it to scan that drive. If the drive is called X: on your computer it would look like chkdsk X:.
/F: The /F switch is the most common of the chkdsk switches. It tells chkdsk to fix any errors it finds. Chkdsk can’t fix errors on a disk that has open files. If chkdsk asks you if you want to check the drive next time Windows Vista boots or dismount the drive choose to check the drive next time Windows Vista boots. Never choose to dismount the drive. That option should only be used by a professional.
/R: The /R switch tells chkdsk to attempt to recover any bad sectors of the hard drive if any are found. A bad sector is a spot on the hard drive that can’t hold saved data anymore.
/I: The /I switch tells chkdsk to perform a less detailed but faster disk check.
/C: The /C switch tells chkdsk to skip the checking of cycles within a folder structure which reduces the scan time. Don’t ask me what this means.
An example of an exhaustive disk check using the command line interface is:
chkdsk D: /F /R
The check disk command shown above will fix any errors it finds and also attempt to recover bad sectors of the D: drive if any are found.

This should resolve your problem.

try ko to sir kung gagana tnxx

 

[xer028]

pahingi nmn po ng link tnx.. kaso hindi ko ma accses ung default ip niya na 192.168.1.1 panu po ma upgrade un..

aw.. baka po tamado na router.. sa main page ng router kasi makikita yung upgrade..

 

[xer028]

try ko to sir kung gagana tnxx

natry ko na po kasi yan sir.. nangyari na kc yan sakin...

 

[tammy03990]

aw.. baka po tamado na router.. sa main page ng router kasi makikita yung upgrade..

un na nga sir bka nga sira na eto router ko kung sakali marerepair pa kya eto..

 

[xer028]

un na nga sir bka nga sira na eto router ko kung sakali marerepair pa kya eto..

yung lang ehehe hindi ko pa naranasan magrepair ng router usually replace kaagad ehehe..

 

[tammy03990]

ganun po ba sir salamat sa tulong.. try ko nlng sa mga pagwaan ng mg pc bka alm nila..