Computer repair (post your pc problems) we can help you

[mikegemai]

Master Password for Bios TS. Nag try na po ako ng online code generator pero walang nangyari, cmos jumper wala pa ring nangyari and cmos removal for 2hrs pero wala paring nangyari. Bka matulungan nyu po ako...

subukan mo to:
1. power down ang UNIT
2. tanggalin ang CMOS battery
3. set mo yung CMOS jumper to clear BIOS
4. saksak mo ulit ang power
5. ON mo ang unit. wag kang mag alala hindi iikot ang fan talaga nyan. basta ON mo lang para mabigyan ng power ang MOBO.
6. set mo ulit ang CMOS jumper to default.
7. ibalik mo ang CMOS battery.
8. ON mo ulit ang unit, kung hindi cya ma ON, tanggalin mo lang ang power cord at saksak ulit, power ON mo ulit.
9. punta ka agad sa bios at set to default lahat. normally, f7 yan. at tsaka VERY IMPORTANT: SAVE AND EXIT.
feedback nalang kung nagawa mo.

 

[jaypeenickdan]

pa help naman mga boss... yung pc pagkatpos kong i format.. sobrang bagal.. as in pag double click mo lang yung MY computer ang tagal mag open.. minsan pa not responding.. pa help naman po.. bakit po ganun...???

 

[r1bnc]

pa help naman mga boss... yung pc pagkatpos kong i format.. sobrang bagal.. as in pag double click mo lang yung MY computer ang tagal mag open.. minsan pa not responding.. pa help naman po.. bakit po ganun...???

more info naman po, windows 7 or 10 or 8.1? installed po ba drivers niya, for sound, videocard, etc.?

 

[Heero084]

sir ask ko lng po

mobo=asrock n68 vs3 ucc
procie= athlonII x2 255
hdd= 160
ram =8gb 2x ddr3 1333
psu=generic
OS= w7 ulti 64bit

problem= keyboard interface error

ty ty ty po ng marami sa lhat po ng gustong tumulong

 

[yheng2392]

sir ask ko lng po

mobo=asrock n68 vs3 ucc
procie= athlonII x2 255
hdd= 160
ram =8gb 2x ddr3 1333
psu=generic
OS= w7 ulti 64bit

problem= keyboard interface error

ty ty ty po ng marami sa lhat po ng gustong tumulong

di po nadedetect keyboard mo ? bka sira yung port mo ng ps2..
try mo gumamit ng ibang keyboard na ps2 if wala talaga gamit ka nalang ng usb na keyboard

 

[ezonity]

Boss, pahelp naman po sa pc ko

mobo: G41T-AD V1.0 (Emachines EL1850)

Problems:
>>No Display, No beep sound, kapag tinanggal ko ung memory ayaw niya magbeep
>>Kapag tinanggal ko ung 4pins power cable, nagboboost ung power pero mahina kapag ikinabit ulet.
>>Tested and working naman po ung ram niya kasi sinubukan ko sa kaparehong motherboard
>> Built in video card lang po gamit ko
>> At bagong psu

UP ko lang mga boss

 

[bitcoder]

subukan mo to:
1. power down ang UNIT
2. tanggalin ang CMOS battery
3. set mo yung CMOS jumper to clear BIOS
4. saksak mo ulit ang power
5. ON mo ang unit. wag kang mag alala hindi iikot ang fan talaga nyan. basta ON mo lang para mabigyan ng power ang MOBO.
6. set mo ulit ang CMOS jumper to default.
7. ibalik mo ang CMOS battery.
8. ON mo ulit ang unit, kung hindi cya ma ON, tanggalin mo lang ang power cord at saksak ulit, power ON mo ulit.
9. punta ka agad sa bios at set to default lahat. normally, f7 yan. at tsaka VERY IMPORTANT: SAVE AND EXIT.
feedback nalang kung nagawa mo.

Thank you for the help TS... ok na ung Acer V5 ko... Almost sinundan ko ung step by step direction mu and it works... Again Thank you

 

[jhaycan]

Mga sir pa help naman po kapag binubuksan ko po yung pc ko e2 po yung nalabas
Port-01: Hard disk, WDC ROM MODEL-UNICORN--
Port reset failed

Salamat po sa makakasagot..
E2 po pala yung picture.. Sana po matulungan nyo ako

 

[pinx2009]

Mga boss help po desktop ko walang power yung mouse keyboard and usb port nagboboot naman yung bios thanks na makkasagot

 

[payuket]

pasubcribe po. salamat!

 

[kulootbebe]

good am, may laptop po kami ang problema pag reformat ko nawla na yun wifi.. any help from u boss . thanks in advance

 

[Genue26]

Boss tanong ko lang.. about s CPU fan replacement.. Same model sila E33681-001. Kaso ang problema ko magkaiba sila ng ampere. Yung defective ay 0.14A tapos yung ipapalit ko ay 0.60A. Pwede ba yun? o dapat magkaparehas talaga ng amperes? yung isa kasi ay Foxconn tapos yung isa Delta. Hingi lang ako ng advice regarding that. Thanks!

- - - Updated - - -

good am, may laptop po kami ang problema pag reformat ko nawla na yun wifi.. any help from u boss . thanks in advance

Boss check mo kung complete yung drivers nya.. For sure walang WLAN driver yan...

 

[donshub88]

Hi..need help po..i reformatted my desktop with windows 7 but i am getting error that ethernet controller was not installed...what can i do with this? i tried installing the driver booster to no avail.

 

[tjay0008]

Hi po, sino po merong pang flash ng acer v3-472PG-52WP Windows 8.1 Single Language?
nasira po kasi recovery file ng laptop ko hindi ko mareformat.

 

[fafaed]

T.S yung laptop ko lenovo z50
balak ko po mag reformat using bootable usb
na sundan ko na pa yung mga
DISKPART
LIST DISK
SELECT DISK 1
(kung disk 1 ung usb drive mu)
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
EXIT

cd X:\BOOT
(X ung dvd drive or virtual drive mu)
BOOTSECT /nt60 Y:
(Y ung usb drive mu)

ang problema ko po hndi ko matransfer yung file na bnili kong dvdr na os installersa usb ganito lagi lumalabas cant read the source file or disk
1 interupted action paulit2 nalang po ganito hanggang 6% lang siya loading hndi ma finish finish maraming salamat s makakatulong

 

[Genue26]

Hi..need help po..i reformatted my desktop with windows 7 but i am getting error that ethernet controller was not installed...what can i do with this? i tried installing the driver booster to no avail.

Kindly check if there's still unknown drivers in Device Manager.
Go to My Computer. Right click on any white space. Choose Properties. Click Device Manager. If there is unknown drivers related to your ethernet, kindly download it.

- - - Updated - - -

T.S yung laptop ko lenovo z50
balak ko po mag reformat using bootable usb
na sundan ko na pa yung mga
DISKPART
LIST DISK
SELECT DISK 1
(kung disk 1 ung usb drive mu)
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
EXIT

cd X:\BOOT
(X ung dvd drive or virtual drive mu)
BOOTSECT /nt60 Y:
(Y ung usb drive mu)

ang problema ko po hndi ko matransfer yung file na bnili kong dvdr na os installersa usb ganito lagi lumalabas cant read the source file or disk
1 interupted action paulit2 nalang po ganito hanggang 6% lang siya loading hndi ma finish finish maraming salamat s makakatulong

Gumagawa ka boss ng Bootable USB? Ito try mo... Zotac WinUSB Maker http://www.symbianize.com/showthread.php?t=1101495&highlight=zotac. Credit to the owner of the link.

 

[lash71]

mga ka SYMB help nmn po ayaw po kac lumabas ng boot bios ng lenovo desktop ko eh gusto ko po sanang baguhin yung OS win 7 sana gagawin ko win10 po kac to eh made in japan sino po ba sa inyo ang may idea sa lenovo mobo

specs my pc

intel core i5 skylake 6500
mobo hindi ko po alam kung anong model eh
4gb ram

yan po sana po matulungan nyo aq kararating lang po kac nito saking mga 3 days na eh gusto ko baguhin ang OS may japanese word kac at ayaw ko po pati ng windows 10 salamat po sa mga tutulong sakin

 

[Ryanandrei]

1. Dell Inspiron 15 3000 series(i7 4510u,840m,4gb ram)
2. Hangs when on battery(sure syang maghahang kapag naglalaro. sometimes maghahang kapag nanonood ng video(while on battery still))
3. Tingin ko di 'to sa windows. windows 8.1 tong laptop ko dati e. tnry ko idowngrade sa windows 7. still wala nangyari.
na try ko na mag system stress(yun ba tawag dun?) dun sa bios. checked naman lahat. di ko pa nattry yung 30 minutes na stress
4. THANKS AND MORE POWER!

 

[trixevash]

pa help naman ts nadali yung screen ng laptop ko acer aspire v3 413

nakaligtaan ko yung anak ko pinake alaman kanina tas pagkakita ko white screen na
paano gawin kaya ito?? then tinitignan ko wala naman mga lines as in nag black and white siya tapos wla na syang color

paano ayusin to

 

[jrod2han]

sir ung samsung np300e5c-a07ae ko kac ayaw mg detect nng external keyboard tsaka nasira ang keyboard niya kaya hndi q ma reformat. anu kaya sira ang usb port o ang sa hardware talaga niya sa loob kac pg sinaksakn ko nman nang coolerfan may power nman.