DUAL WAN tutorial - WIMAX+WIMAX or WIMAX+USB 3g

[areal]

sino po nakapagpagana ng E357 dito? share ko lang sana net ng E357 ko via WIFI eh...kahit di na dual wan

 

[sabanramy]

sino nang nka try nito

 

[burugz]

Sir,sorry di ako nakapagbackread,di ko alam kung nasagot na itong tanong na ito,pero kung hindi dhcp server yung wifi,ehdi kelangan static ip lahat ng kokonek dun tama ba?

 

[jminfo]

Pa BM po muna mga Master.
haha ang haba po ng binackread ko hehe


Bibili na po Ako Router 5358u.mukang, masmaganda,
po to. kaysa sa 56u pasagot po Thanks.

 

[darkslayer922]

astig to ts. pwde ba dalawang 3g modem dito like globe tattoo and smartbro mf190b.

 

[matamisbuko]

pa bm muna ts...

 

[jminfo]

Mga Master Cnu po My Ganitong Dual Wan Router Dlink DI-LB604

Pa Help naman po sa Pag Config ng 2 Wimax ko


1 Wimax Bm622m Ip 192.168.254.1
2 Wimax Bm623 Ip 192.168.254.254

Pa Help po kung Panu E Setting Ung Load Balance

Salamuch!!! hit ko nalang po tutulong

 

[isugisug]

mga sir pa help po. d na ma acess ung cdrking cw5354u ko after mag update to tomato. try the guide pro ito ung lumalabas sa tftp ko...


baka my idea po kayo...



View attachment 201705

 

[ernz1914]

Sir pwede ba yung setting na lahat ng browsing, downloading, video streaming is sa isang wimax then yung isang wimax is pure gaming. Malag kasi e. Paano po ba yun?

 

[tembong]

ill be making a short tutorial for the benefits of ka sb

right now wimax 1mb+3g gantimpala sim

downloading average 150-200kb/sec sa idm hehe
d ko pa natry pag madaling araw itestdrive

matutuwa kyo sa tomato router
1. Dual wan
2. Load balancing
3. Bittorrent = kht alang pc pede torrent
4. Samba file sharing
5. Wifi
6. Dsl router



Lets start
needed items

warning: Hindi po gagana ung firmware na nasa link ko dun sa tig 1380 na binebenta na bago ng cdrking.

1. Cheapest router with loadbalancing of 2wan tomato flashed
only 1580
cdrking cw-5354u <===click here

2. Wimax and wimax or wimax and 3g broadband usb

after buying the router we need to flashed it to dual wan tomato firmware
download the firmware <====


after flashing it with the new firmware its now a dualwan capable loadbalancing router so cheap

problem 1 = tomato router has same router ip with wimax 192.168.1.1 so theres a conflict we need to change the tomato router ip address to 192.168.2.1

set your default ip addresses

wimax1 = 192.168.1.1
wimax2 = 192.168.3.1
router = 192.168.2.1

problem1 solved

problem 2 = each router has 2 dhcp server again this is conflict so we need to disable the dhcp server of tomato router

problem 2 solved

problem 3 = enabled the usb support for 3g
select usb and nas- check the usb core support


flashing the tomator router to enable dual wan

1.now plug the tomato router to your computer
put the utp cable to the back port of your cpu then at the tomato router lan1-lan4 port any port will work

note this is the 1st tym to config the router
2. Go to your browser type 192.168.1.1
username: Admin password:admin

3.select administion - upgrade
ok now select the tomato flash dualwan that we downloaded
then click ok


configuring the tomato router

1.now plug the tomato router to your computer
put the utp cable to the back port of your cpu then at the tomato router lan1-lan4 port any port will work

2. Go to your browser type 192.168.1.1
username: Admin password:admin

3. Go to basic-network

setup for wimax+wimax

wan1 - select dhcp - put it in at internet port of tomato router wimax1
wan2 - select dhcp - put it in lan4 port of tomato router wimax 2


under "lan"
uncheck dhcp server
change ip address to 192.168.2.1

at the bottom click save

setup for wimax+3g usb

wan1 - select dhcp - put it in at internet port of tomato router wimax1
wan2 - 3g - put the 3g broadband at the usb slot port of the tomato router

config the 3g
dial number - *99#
apn - http.globe.com.ph
modem port - 0

under "lan"
uncheck dhcp server
change ip address to 192.168.2.1

at the bottom click save

configuring lan adapter of pc to static ip
ipaddress 192.168.2.xx xx=2-255
default gateway - 192.168.2.1

dns gateway - 192.168.2.1

note: If you want to access the gui of your tomato router
you need to type 192.168.2.1 after the configuration

and for wimax 192.168.1.1 still the same

finish sensya mablisan lang para magkaidea kyo

status
http://i43.tinypic.com/2hzgxvm.jpg

heto ss
http://i40.tinypic.com/2evu2q1.jpg

hehe sa mga mababait dyan pahiram naman ng 2mb mac thankss

sir pki up naman po ng link dead na kasi firmware update

 

[tembong]

up po ulit sa firmware plz

 

[isugisug]

pa help po paano ma unbrick cw5354u ko...

after ko po magupgrade d na cya nag bibigay ng DHCP pro my lyt namn ang power at blinking naman ang mga lanports pag my nka saksak.. pro pag buksan ko default address nya na 192.168.1.1 ay walang connection and d nag oopen..

baka po my mga guide kayo paano maayos ito..

na try ko na ung galing sa C-r king na guide pro not working pag mat TFTP ako

ito ung lumalabas:




Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>cd c:\

c:\>tftp -i 192.168.1.1 put tomato-1.27_CW-5354U.trx

Transfers files to and from a remote computer running the TFTP service.

TFTP [-i] host [GET | PUT] source [destination]

-i Specifies binary image transfer mode (also called
octet). In binary image mode the file is moved
literally, byte by byte. Use this mode when
transferring binary files.
host Specifies the local or remote host.
GET Transfers the file destination on the remote host to
the file source on the local host.
PUT Transfers the file source on the local host to
the file destination on the remote host.
source Specifies the file to transfer.
destination Specifies where to transfer the file.

 

[yojhy]

dual router TL- R470 config

Paanu po config nang TL-R470 connection sa modem 936