Symbianize Forum

Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.

All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!

DV 235 OX230 and other mediatek broadband chipsets ERROR codes

Paulo159

Amateur
Advanced Member
Messages
105
Reaction score
0
Points
26
(code)


100 "IdleMode Deregistration (Power Down)"

101 "Transmit DREG_REQ Fail "

102 "Transmit DREG_REQ Success"

200 "Bs Restarted"

201 "RES_CMD air message"

202 "DREG_CMD air message"

203 "frame duration changed"

204 "Unsolicited RNG_RSP with DL_FREQ_OVERRIDE TLV"

205 "Ranging abort: Rx RNG-RSP with abort status"

300 "Synchronization lost due to lost DL-MAP timeout"

301 "Synchronization lost due to lost UL-MAP timeout"

302 "Synchronization lost due to T1 timeout"

303 "Synchronization lost due to T12 timeout"

304 "Synchronization lost due to any other reason"

400 "no channel available"

500 "No Ranging Tx Opportunity"

501 "Ranging retries exhausted"

502 "Reach Max. number of continue RNG-RSP"

503 "Ranging with the serving BS was aborted"

504 "Rng failed as result of T2 timer expiry."

505 "Rng failed due to BS inconsistency"

506 "Retries of the DREG_REQ message have exhausted"

507 "Retries of the SBC_REQ message have exhausted"

508 "Retries of the REG_REQ message have exhausted"

509 "Network Entry Timeout: Wait for searching channel."

510 "Network Entry Timeout: Wait for RNG-RSP."

511 "Network Entry Timeout: Wait for Send-IND of SBC-REQ."

512 "Network Entry Timeout: Wait for SBC-RSP."

513 "Network Entry Timeout: Wait for Send-IND of REG-REQ."

514 "Network Entry Timeout: Wait for REG-RSP."

515 "Network Entry Timeout: Unexpected Condition."

516 "SBC negotiation error"

517 "Registeration error"

518 "Network entry duration timer timeout"

519 "Initial ranging CINR check failed: poor channel condition"

520 "Initial ranging DCD NOT usable (e.g. FDD)"

521 "Initial ranging UCD NOT usable (e.g. FDD)"

522 "Initial ranging T20 timeout: No preamble detected within T20"

523 "Initial ranging T20a timeout: No DL-MAP after AFC within T20a"

524 "Initial ranging T21 timeout: No valid DCD to decode DL-MAP within

T21"

525 "T2 timeout: No ranging opportunity in UL-MAP within T2"

526 "Weak signal, ranging code retries exhausted"

527 "RNG-REQ retries exhausted (No RNG-RSP from BS, check MAC addr)

or RNG-REQ CANNOT be sent"

528 "MAP FEC is NOT supported"

529 "Weak signal, PHY error reported"

530 "RNG-REQ retries exhausted due to no CDMA_Alloc_IE"

531 "No preferred Channel in CDB."

532 "Ranging Error"

600 "Authorization failed"

601 "Auth Fails: BS does not activate EAP. (Suggestion: Check MAC

Address or SBC TLVs)"

602 "Auth Fails: BS does not send SA-TEK-Challenge. (Suggestion: EAP

Outer ID format is accepted, but collided)"

603 "Auth Fails: BS sends SA-TEK-Challenge with invalid AKID."

604 "Auth Fails: BS does not send SA-TEK-Response."

605 "Auth Fails: EAP is not negotiated in SBC."

606 "Auth Fails: EAP Fails (Suggestion: 1.Check Auth Configuration.

2. EAP Outer ID format is not accepted)."

607 "Auth Fails: Auth Request at unexpected state."

608 "Network Entry Timeout: Wait for Auth."

700 "Host Disconnect during NwEntry"

800 "Weak signal, no target BS to handover"

801 "Cannot return SBS, resource retain timer expired"

802 "the return to serving BS failed"

900 "UMAC assert"

901 "PHY error"

902 "PHY is reset during initial RNG/search NET/assocn"

903 "PHY is reset during HO RNG/Fast RNG/return SBS/idle HO"

904 "PHY is reset during location updt/idle reentry"

905 "PHY is reset during PRNG/unsolicited PRNG/keep alive/PHY

initiated PRNG"

906 "BS doesn't allocate BW for a long time after BR is sent"

907 "Idle Mode Timer timeout"

908 "PS request to change BS and starts NWentry"

909 "Keep alive check failed"

910 "ARQTX reset retries exhausted"

911 "ARQRX reset retries exhausted"

912 "Retries of the TFTP_CPLT message have exhausted"

913 "TFTP_RSP error"

914 "Secondary management complete message response is fail"

915 "UL sleep control subheader retries exhausted"

916 "Scanning failure"

917 "MOB_SLP-REQ retries exhausted"

918 "Invalid MTK-Authorized Device Certificate"


share lang sa mga di nakaka alam.
 
Back
Top Bottom