DV235T manual change mac.

[boou22]

GLOBE
Login as Admin @ https://192.168.15.1
Wimax>Profile
1. Set the freq.
Wimax>Profile>Authorization Setting
2. Authentication Mode: User Authentication
3. Input Anonymous Id: mac without colon ":"@globelines.com.ph
4. Input Username: generated [email protected]
5. Input Password: generated password
6. Check Enable Auth Mode Decoration in EAP Outer ID
7. Check Ignore Cert Verification
8. SAVE!!!
Network>Wan
9. @ Clone Mac Address input mac with colon ":"
10. SAVE and it will reboot.

SMART & WI-TRIBE
Login as Admin @ https://192.168.15.1
Wimax>Profile
1. Set the freq.
Wimax>Profile>Authorization Setting
2. Authentication Mode: Device Authentication
3. Input Anonymous Id: mac without colon ":"@smartbro.net / wi-tribe mac only without colon ":"
4. In MTK-Authorized Device Cert. File browse .pem file
5. In Device Private Key browse .key file
6. Input Username: smart1_lancelot
7. Input Password: smart1_lancelot
8. Check Ignore Cert Verification
Network>Wan
9. @ Clone Mac Address input mac with colon ":"
10. SAVE and it will reboot.


simple thanks is much appreciated.

 

[yumchabz03]

sir maraming salamat dito. accidentally ko nakita to.. pero need ko talga tong tut na to. salamt!

 

[rexelens]

GLOBE
Login as Admin @ https://192.168.15.1
Wimax>Profile
1. Set the freq.
Wimax>Profile>Authorization Setting
2. Authentication Mode: User Authentication
3. Input Anonymous Id: mac without colon ":"@globelines.com.ph
4. Input Username: generated [email protected]
5. Input Password: generated password
6. Check Enable Auth Mode Decoration in EAP Outer ID
7. Check Ignore Cert Verification
8. SAVE!!!
Network>Wan
9. @ Clone Mac Address input mac with colon ":"
10. SAVE and it will reboot.

SMART & WI-TRIBE
Login as Admin @ https://192.168.15.1
Wimax>Profile
1. Set the freq.
Wimax>Profile>Authorization Setting
2. Authentication Mode: Device Authentication
3. Input Anonymous Id: mac without colon ":"@smartbro.net / wi-tribe mac only without colon ":"
4. In MTK-Authorized Device Cert. File browse .pem file
5. In Device Private Key browse .key file
6. Input Username: smart1_lancelot
7. Input Password: smart1_lancelot
8. Check Ignore Cert Verification
Network>Wan
9. @ Clone Mac Address input mac with colon ":"
10. SAVE and it will reboot.


simple thanks is much appreciated.

Galing mo sir...eto ang hanap ko...

 

[ertyearth]

wow ok to!
siguradong walang palaman. XD
salamat!

 

[danzel12]

sir salamat po ng madame yung frequency po b babaguhin w pa?

 

[boou22]

sir salamat po ng madame yung frequency po b babaguhin w pa?

opo. kung globe mac gamit mu taz papalit ka globe mac din no need na magpalit ng freq pero kung globe to smart or to witribe magpapalit ka po ng freq kasi magkakaiba sila.

 

[redreel]

beri beri nice TS. Malaking tulong sa mga hindi pa kabisado.

 

[kahm27]

Sir, ask ko lang pano ba procedure kapag mag change mac using cmd prompt ?

 

[batman14]

salamat ts

 

[GRANEIDER]

salamat ng marami dito TS.

 

[francisdave]

thanks sir tagal ko na hinahanap to ung may tinatawag pang pem at key tagal din kc ako d na nakakabisita sa sb