Globe new 936 how to openline ito na

[allanfundamera]

Asan po ang multicast tool upgrade sa Filkes at yun CID reader..wala po nakaattach yun Toolbox lang meron dun

 

[Yujdik]

TS pwde kya gumamit ng USB to Type C? Hirap ksi maghanap ng USB to USB

 

[jamesgorre1973]

mga boss ano po ba ang ilagay para pandikit d ko kasi gets kong ano ung tyanin or twister pa help po mga masters jan ty

 

[nh4Rdz]

salamat din po sana makatulong

- - - Updated - - -



eto po sir

View attachment 1146924

- - - Updated - - -



up up up

para sa mga master jan

- - - Updated - - -



eto sir try mo

USB_NOT RECOGNIZE FIX_jansen.rar
http://www40.zippyshare.com/v/0L7yAbWa/file.html

sir warfreakaztig pa reupload naman po baka makatulog same problem kasi thanks ung usb_not recognize fix

 

[spasyo]

pwde ba humingi ng password sa rar files na binigay nyo sir?

 

[lloydmark13]

http://www.mediafire.com/download/ot5c468fl7i4fkx/new+936+full.rar

Preparation...

Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2
Plug Power pag d umilaw bitawan muna pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulit ka
Plug USB


1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

5. Plug Power Chord, Plug LAN cable

6. Sign in 192.168.8.1 admin/admin

Unlocking sim

1. Open B315s toolbox
- admin admin
- API Control

/api/device/mode

<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK

2.Open telnet
- telnet 192.168.8.1
type ati
- at^sfm=1
- at^reset

3. open Multicast pili ka ng gusto mong FW
unplug adaptor run multicast plug adaptor
4.WAIT mo Green Mode
open cid reader
5.at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0

6.AT ^ SYSCFGEX = "030201", 3FFFFFFF, 1, 2, 800C5 ,,

7.AT ^ SYSCFGEX = "0302", 3FFFFFFF, 1, 2, 800C5 ,,

at^sfm=0
at^reset

Walang iyakan at Salamat sa May ari Nang tuts Na 2 at Dun sa Bashers ko Iyak kana lang free na ang openline
kAYA wAG KANA Mag binta nang tuts


pass lakasko2

ty TS for sharing..

 

[mermer123698745]

boss anong password ito

 

[aceraspire2107]

" kapg may sim n me n smart LTE sim.. no need n ung part n SIM unlocking po db..??? since ung modem itself lang po ung ioopenline... "
thanks.

 

[vinzyre2323]

Mga boss Patulong naman. bakit stuck sakin sa checking download mode sa flasher?

 

[liteice]

anong firmware nyan mga bossing? thanks

 

[VG Vincent Gabriel]

up ko to TS hehe.. beginner

 

[ralphjohn]

"lakasko2" yan po ang pass nasa baba lang po.

 

[technome]

boss, pwede kaya to sa old model?

 

[knappz]

@ts na try ko po ito after po ng procedure sa unlocking sim step #1 insert code nag reset sya then stuck up sa power led lang... gagana ba pag ginamitan ng multicast? or ma reread ba ng multi cast?

 

[JAYRICK015]

http://www.mediafire.com/download/ot5c468fl7i4fkx/new+936+full.rar

Preparation...

Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2
Plug Power pag d umilaw bitawan muna pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulit ka
Plug USB


1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

5. Plug Power Chord, Plug LAN cable

6. Sign in 192.168.8.1 admin/admin

Unlocking sim

1. Open B315s toolbox
- admin admin
- API Control

/api/device/mode

<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK

2.Open telnet
- telnet 192.168.8.1
type ati
- at^sfm=1
- at^reset

3. open Multicast pili ka ng gusto mong FW
unplug adaptor run multicast plug adaptor
4.WAIT mo Green Mode
open cid reader
5.at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0

6.AT ^ SYSCFGEX = "030201", 3FFFFFFF, 1, 2, 800C5 ,,

7.AT ^ SYSCFGEX = "0302", 3FFFFFFF, 1, 2, 800C5 ,,

at^sfm=0
at^reset

Walang iyakan at Salamat sa May ari Nang tuts Na 2 at Dun sa Bashers ko Iyak kana lang free na ang openline
kAYA wAG KANA Mag binta nang tuts


pass lakasko2

Nice TUT boss. bookmark ko muna

 

[j10nido23]

slamat po dito bossing try ko mamaya...

 

[pcdr0808]

password po ts... thanks

 

[e2kaoh]

Idol..na have disk ko naman tpos na change directory na pero laging adbp.....dll is missing

 

[heys]

ano problema ts pag checking lang 30 mins na ayaw pa din done remove batery napili ko.naman tamang com

 

[Ezekiel26]

nice hhehehe di masama kung subukan