[GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 update)

[ruzzty06]

may kitkat update kaya lalabas para dito.

 

[crashtjmz]

Hello Guys!

Ang tagal ko di naka-bisita dito.. masyado ko kasing na-enjoy FuBo ko..
Well, magtatanong lang po kung may bago bang ROM para sa FuBo natin? Yung optimized for gaming? Thanks po sa sagot!

 

[dxspeedy]

Boss ano po mas maganda na firmware dyn na update ung the best po?

 

[tongsheng1]

mga sir ano po kaya sira ng fubo ko cannot connectto camera po...

 

[tequer143]

useful thread...

 

[guabrex]

Re: [GUIDE] Fusion bolt upgrade to Official Ainol Novo7 Venus Firmware

thank you gumana sakin.

 

[vheryoness]

Re: [GUIDE] Fusion bolt upgrade to Official Ainol Novo7 Venus Firmware

maraming salamat sa mga feedbacks
as of now wala pa nirerelease na official rom para sa fubo natin
antay antay lang hehe

 

[muchizuke0693]

Latest Firmware Jan 2014

Disclaimer
I am not responsible if your tablet gets bricked, by following the process you are voiding your warranty and significant damage may be caused to your device.
If you are naive enough to screw somewhere, then it is your responsibility.
Software are unpredictable in nature, one may/may not act as predicted especially in case of rooting (personal experience). Hence my friend, treat with ULTRA care.
In short,
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR TABLET
(Please Read Through Before Starting Any Process)

Make a backup of all your files inside your tablet. The flash/upgrade process will format your tablet, deleting everything.

1.download the two archive files here:
new Firmware Update tool version 1.05.02
Firmware Update Tool
Latest Firmware

• 4.2.2 Jan 2014 http://yadi.sk/d/IqtkqbPyFyHN3

Previous firmware

• 4.2.2 0523 http://d-h.st/zpp
• 4.2.2 Firmware HDMI Fix http://d-h.st/WKV
• 4.1.2 0428 Firmware: http://d-h.st/uJV
• 4.1.1 0328 Firmware http://d-h.st/v0u
• 4.1.1 0203 Firmwarehttp://d-h.st/MLQ
• Owl player http://d-h.st/HXj

2. shutdown Fusion bolt and then disconnect from PC
3. hold key "volume+", then connect PC USB port and wait few seconds
4. PC will ask for unknown device drivers, select the path to folder "\Hero 4 nuclear upgrade tool\Driver\" from "Firmware Update Tool" and let install them
5. start the Firmware Update Tool and open the jellybean_atm7029_7_a_130328.fw file
6. Important: select all the three .img files (misc.img, rec.img, system.img) if you forget anything to select the Fusion bolt will NOT BOOT anymore!
7. click DOWN button and wait until Successful 100% flashing done
8. disconnect from usb and let the Venus startup, first start may takes some minutes more than usually
9. enjoy your new Ainol Novo Venus

Video Tutorial by Cloud Deter http://www.youtube.com/watch?feature=player_embedded&v=9OZKCdkg1GY

credits to:
http://forums.zzkko.com/
http://www.slatedroid.com
http://dragondevs.com

feedbacks

tanung lng bat ayaw gumana ng sound?

 

[tequer143]

mga masters tanung lang po at sana may makasagot.
kabibili ko lang po ng FuBo ko at nakastock ROM pa po sya, pero madalas po ang paghang nya kahit nakahome lng sya or binubuksan mga apps,
anu po kaya prob nito at pwede gawin para maiwasan paghang nya? TIA

 

[heleina]

mga masters tanung lang po at sana may makasagot.
kabibili ko lang po ng FuBo ko at nakastock ROM pa po sya, pero madalas po ang paghang nya kahit nakahome lng sya or binubuksan mga apps,
anu po kaya prob nito at pwede gawin para maiwasan paghang nya? TIA

marami po atang apps na nakabukas.,

 

[tequer143]

marami po atang apps na nakabukas.,

ganun po ba. try ko po observe. fb later.
salamat po sa respond

 

[tequer143]

mga kasymb, lagi parin naghahang FuBo ko, meron po ba dito parehas ng experience ko.

 

[heleina]

mga kasymb, lagi parin naghahang FuBo ko, meron po ba dito parehas ng experience ko.

try nyo na lang magpalit ng FW. yung venexus ang kunin nyo.

 

[silentkira]

mga boss pa help nman please please ayw pag nilalaunch ko pad 0 usb device detected 0 UDISK / 0 ADFU wala xa ma read na usb device pero pag chineck ko device manger may nka install nman na driver (Actions usb 2.0 (HS) winusb device... help po please

edit: hindi mabasa n flasher yung 0523 n firmware bat po ganun yung ibang frim ware na try ok nmna xa lng ang di mabasa....

 

[heleina]

mga boss pa help nman please please ayw pag nilalaunch ko pad 0 usb device detected 0 UDISK / 0 ADFU wala xa ma read na usb device pero pag chineck ko device manger may nka install nman na driver (Actions usb 2.0 (HS) winusb device... help po please

edit: hindi mabasa n flasher yung 0523 n firmware bat po ganun yung ibang frim ware na try ok nmna xa lng ang di mabasa....

panong di na mabasa? yung installer ba ay di nababasa ng fubo mo? extract nyo lang yun zip file.

 

[tequer143]

try nyo na lang magpalit ng FW. yung venexus ang kunin nyo.

gusto ko po sana pero mavovoid po ba warranty nya?last month ko lang po kasi nakuha to sa globe plan.

 

[chai110594]

Success. Mabilis pero ang bilis madrain ng battery.

 

[exogian]

sir sino po may alam ng stock rom ng fubo, pahingi naman po maraming salamat!

 

[heleina]

gusto ko po sana pero mavovoid po ba warranty nya?last month ko lang po kasi nakuha to sa globe plan.

mavovoid po ang warranty nyan. pero bibilis naman ang fubo nyo. alam ko po sa globe 1 month lang kayo pwede magpalit, after that di na kayo covered.

- - - Updated - - -

gusto ko po sana pero mavovoid po ba warranty nya?last month ko lang po kasi nakuha to sa globe plan.

mavovoid po ang warranty nyan. pero bibilis naman ang fubo nyo. alam ko po sa globe 1 month lang kayo pwede magpalit, after that di na kayo covered.

 

[veilside13]

Mga sir patulong naman po,

biglaan nalang nastock sa boot logo ng cherry mobile ung fusion bolt ko,

hindi rin ma hard reset..

anu po bang pede ko gawin para mapagana ko po siya..

1 taon na mahigit tambak to dito sa house, may pag asa pa kaya ito?

Salamat po!