Symbianize Forum

Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.

All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!

Hang Logo,Deadboot,Deadset Basta Detected sa PC o Laptop..Post Here.

Status
Not open for further replies.
Sir,medyo naguguluhan ako sa explanation mo...pwede po paki. 1 by 1.

na detect na po cya ng pc sir .. kaso dun lng po cya na dedetect isa isang klase na recovery mode ung color yellow ung mga words .. pero pag na punta na po aq sa isang klaseng recovery mode ung color blue ung mga words .. d na po cya na dedetect .. :noidea:
 
Good Am All

Did you also to Flash it into different Firmware mam?cause if that if kind of problem is still coming back after flashing any firmware.possible the problem is in your EMMC of the phone..I'll Suggest try to ask to your Cell Tech near in your Area.


- - - Updated - - -



=====================================

Hi,

tried flashing it using another ROM but could not coz of compatibility issue. it will only flash on the one that you give me.

:help::help::help::help::help:

Try to flash again,the one that i give to you.but this time again try uncheck the uboot and flash.

- - - Updated - - -

- - - Updated - - -


Sir,Flash muna Hold Vol-

- - - Updated - - -

Hi Sir, Ganun parin. View attachment 1155149
Baka.hindi na.install driver ng phone nyo.

- - - Updated - - -

na detect na po cya ng pc sir .. kaso dun lng po cya na dedetect isa isang klase na recovery mode ung color yellow ung mga words .. pero pag na punta na po aq sa isang klaseng recovery mode ung color blue ung mga words .. d na po cya na dedetect .. :noidea:

ahh...recovery mode yung isa tapos yung isa download mode?
pero ang tanong ko pag.isasalpak mo sya pc na wala kang i.ho.hold na dedetect ba normally ang cp?
 
Last edited:
Baka.hindi na.install driver ng phone nyo.

Hi Sir Ito naman error ngaun...
View attachment 1155175

sir,baka nanahirapan ka pwede naman kita tulungan thru via teamviewer.

- - - Updated - - -

=============================

so unchecked UBOOT then checked the rest of the options? then flash after?
Is that what you mean?

Tried it but still getting the same issue

:help::help::help::help::help::help:

So its means that the problem is in the phone its self..try ask near tech at your area mam.
 
Last edited:
sir,baka nanahirapan ka pwede naman kita tulungan thru via teamviewer.

- - - Updated - - -

So its that the problem is in the phone its self..try ask near tech at your area mam.

====================================

What do u mean the problem is the phone.
Is this because of the latest firmware i downloaded on this phone a month ago that cause the cellphone to get damage.

I already had a tech checked my phone and was told that its an issue with the program.

Can you please explain to me why its the phone issue?

Thank you so much for all your help for the past days!!!
I appreciate it so much!!

:pray::pray::pray::pray::pray::pray::pray:
 
Last edited:
- - - Updated - - -

baka hindi tama pagka.trigger nyo ng pag.format sir..kaya ng error.

- - - Updated - - -

pano po ba ang tamang pagtrigger?

ganito kasi ang ginagawa ko jan: dapat naka-OFF ang phone, better alisin ang BATTERY.
1. select/toggle yung dapat settings sa SPFlash tool.
2. Then click na yung start/format.
3. bago i-plug ung USB, press & hold up/down (+/-) volume button + power button, then wait na maging pula yung status bar (yung may percentage sa lower part), it means nadetect na ang phone.
4. hintayin lang matapos.

yan po, yung process ko sa pag-trigger / pag-format ko..
ganyan kasi sa pag-flash. meron po bang mali sa process ko?
 
- - - Updated - - -

baka hindi tama pagka.trigger nyo ng pag.format sir..kaya ng error.

- - - Updated - - -

pano po ba ang tamang pagtrigger?

ganito kasi ang ginagawa ko jan: dapat naka-OFF ang phone, better alisin ang BATTERY.
1. select/toggle yung dapat settings sa SPFlash tool.
2. Then click na yung start/format.
3. bago i-plug ung USB, press & hold up/down (+/-) volume button + power button, then wait na maging pula yung status bar (yung may percentage sa lower part), it means nadetect na ang phone.
4. hintayin lang matapos.

yan po, yung process ko sa pag-trigger / pag-format ko..
ganyan kasi sa pag-flash. meron po bang mali sa process ko?

dapat VOL - lang hino.HOLD mo.
 
- - - Updated - - -



ahh...recovery mode yung isa tapos yung isa download mode?
pero ang tanong ko pag.isasalpak mo sya pc na wala kang i.ho.hold na dedetect ba normally ang cp?

d po sir na dedetect .. dun lng po cya madedetect pag nsa recovery mode na color yellow ung mga words .. :noidea:
 
sir pahelp po not charging no power yung myphone rio2 lite anu po pwd ko gawin?
 
View attachment 287423

sir pa help po... ASUS me 172v stock sa logo....

nadedetect pa po sa pc....

nagawa ko na po lahat sa XDA na forum about jan... factory reset via micro sd.... restore dump via micro sd wala pdn.... pa help TIA
 

Attachments

  • asusMe172v.jpg
    asusMe172v.jpg
    139.9 KB · Views: 1
Last edited:
sir magandang hapon, pwede po ba makahingi ng stock rom ng O+ 8.93
hang po kasi sa logo
stock rom and flashtool po maraming salamat:)
 
View attachment 1155196

sir pa help po... ASUS me 172v stock sa logo....

nadedetect pa po sa pc....

nagawa ko na po lahat sa XDA na forum about jan... factory reset via micro sd.... restore dump via micro sd wala pdn.... pa help TIA

sir,malaking trabaho yan..ano po mga move ginawa nyo?

- - - Updated - - -

sir magandang hapon, pwede po ba makahingi ng stock rom ng O+ 8.93
hang po kasi sa logo
stock rom and flashtool po maraming salamat:)

sir,tulungan kita pero hingi muna ako ng pciture ng phone na may problema.
 
sir,malaking trabaho yan..ano po mga move ginawa nyo?

- - - Updated - - -


first ni reset ko gamit ung factory reset from asus...... so wala po ngyare... tapos aun nabasa ko ung dump/flash aq gamit ung ibang image na uploaded from site xda
forum asus me172v exclusive lang un for me172v so aun po... tapos wala pdn.... stock logo pdn.... ginamit ko nrn ung full stock dump nung naka upload dun... same parin... bngay na kc sakin to na stock logo na... gnwa ko nalang....

View attachment 287424


me pag asa pa kaya to sir?..
 

Attachments

  • asusMe172v.jpg
    asusMe172v.jpg
    139.9 KB · Views: 1
Last edited:
hehe, nasubukan ko po parehas, same lang po lumabas na error.. :D

na.install naman properly ang mga driver dba sir?

- - - Updated - - -

sir,malaking trabaho yan..ano po mga move ginawa nyo?

- - - Updated - - -


first ni reset ko gamit ung factory reset from asus...... so wala po ngyare... tapos aun nabasa ko ung dump/flash aq gamit ung ibang image na uploaded from site xda
forum asus me172v exclusive lang un for me172v so aun po... tapos wala pdn.... stock logo pdn.... ginamit ko nrn ung full stock dump nung naka upload dun... same parin... bngay na kc sakin to na stock logo na... gnwa ko nalang....

View attachment 1155228


me pag asa pa kaya to sir?..

Sir,try nyo 2.

PROCEDURE:

1. Una i download muna ang magic firmware na CLEAR DATA
>>>>Click Me<<<<
2. Gumamit ng isang memory card na ok mas maganda kung original kung wala kahit local basta ok. (sa 2gb di ko napa gana, Sa 8gb working tested by me.)
3. i copy ang rar files at i extract sa 8gb memory card.
4. i-insert ang memory card sa asus memo pad habang naka off mode.
5.hold press ang power button hanggang lumabas ang asus android bsp installation tulad ng nasa figure
1. fig. 1 View attachment 287466
6. select clear data sa pamamagitan ng pag pindot ng volume up and volume down
2. fig.2 View attachment 287467
7. Then press power button to wipe
3. fig.3 View attachment 287468
8.Remove installation media (MMC)
4. fig.4. View attachment 287469
9.Mag r-reboot ang unit then......
10. DONE!!!!!
View attachment 287470

Note: Do Back up for Orignal Firmware of your Phone.
Do this by your own Risk.
Do Post Result after Testing Files Or Else No More Following Question will be Answed.
Do Hit Thanks For Post and 1st Page just for the effort i'ved Done.
Good Luck.:)
 

Attachments

  • 9fscn4.jpg
    9fscn4.jpg
    72.8 KB · Views: 6
  • 2qiz2ht.jpg
    2qiz2ht.jpg
    67 KB · Views: 2
  • 157oxas.jpg
    157oxas.jpg
    86 KB · Views: 2
  • 1zxmsdf.jpg
    1zxmsdf.jpg
    71.3 KB · Views: 3
  • 15gd005.jpg
    15gd005.jpg
    107.7 KB · Views: 3
Last edited:
Status
Not open for further replies.
Back
Top Bottom