HELP OPPO NEO 5 DEAD BOOT - brom error: S_PART_NO_VALID_TABLE (1037)

[codezro]

Nag Flash ako ng stock firmware gamit ang SP Flash Tool
Kaya lng, na choose ko ang formal all + download.
Yan ang pagkakamali ko, sana Download only pala yun.

Ngaun successfully flash nmn sa format all + download
at na try ko na rin download only
Turn on ng phone, it always vibrating lng. pero na dedetecct pa nmn ng PC.

Ano kaya pwde kong gamin?

Ito mga errors:

USING FORMAT WHOLE:
brom error: S_PART_NO_VALID_TABLE (1037)

no valid partition table for nand flash!
HINT: please make sure there is a correct load in the target.
"Format->Download" Could not be executed without target layout table!
Please "Download" ONLY first to cresate layout table on the target!

USING RAM TEST:

============ Memory Detection Report ===========

Internal RAM:

Size = 0x00020000 (128KB)

External RAM:

Type = DRAM

Size = 0x40000000 (1024MB/8192Mb)

NAND Flash:

ERROR: NAND Flash was not detected!

EMMC:

EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000001d2000000(7456MB)

============ RAM Test ============

Data Bus Test:

[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!

Address Bus Test:

[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!

RAM Pattern Test :
Writing ...