Mining Help!

[junjun1107]

Meron po akong mining rig na:
GPU: Vega 56
Miner: teamredminer

Paano po tanggalin yung autofan at gusto ko po macontrol mismo yung mga fan ng gpu ko.
Nagsearch na rin po ako sa internet. Wala po ako makitang solution.
*Yung claymore po na MINER. Outdated na po.
* Nagtry ko na rin fresh install ng hiveos sa ssd. Same issue pa rin po.

Salamat po sa makakasagot.

 

[Ruggzee]

Alam ko default nayan na auto set ng fan, ang pwede mo lang gawin is per temperature. Better use t-rex miner, nbminer or phoenixminer. Mas madali sila i customize

--fan_default_polaris=CFG Set the default config used for all Polaris gpus (450/460/550/560/470/480/570/580/590).
The built-in default is 55:::50 for 55C core temp and fan starting at 50%.
Note: this setting is also reused for Tonga gpus.
--fan_default_vega=CFG Set the default config used for all Vega gpus (Vega 56/Vega 64).
The built-in default is 55::70:50 for 55C core temp, 70C mem temp and fan at 50%.
--fan_default_vega2=CFG Set the default config used for all Radeon VII gpus.
The built-in default is 70::75:80 for 70C core temp, 75C mem temp and fan at 80%.
--fan_default_navi=CFG Set the default config used for all Navi (Navi10).
The built-in default is 60::80:70 for 60C core temp, 80C mem temp and fan at 70%.
--fan_default_big_navi=CFG Set the default config used for all Big Navi (Navi21).
The built-in default is 50:::70 for 50C core temp and fan at 70%. The reason for
not including mem temp is a missing sensor in the Windows ADL library.